[Mon Sep 26 10:21:56 2011] Detection parameters:
  Position = (298.9, 322.1) = 10 38 45.49 53 30 8.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2017.0 +/- 57.0
  Background counts = 72.5
  Rate = 0.1 +/- 0.003

[Mon Sep 26 10:21:56 2011] Off-axis axis estimate = 1.72'
[Mon Sep 26 10:47:32 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 10:47:32 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Mon Sep 26 10:47:32 2011] source mask rpix=1.7, npix_max = 18, mask sum = 10, frac = 0.528
[Mon Sep 26 10:47:32 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Mon Sep 26 11:04:59 2011] fullrun_mos2_xmm0112810301_pi300-10000_cl_pass0_src1.ximg exists
[Mon Sep 26 11:04:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112810301_pi300-10000_cl_pass0_src1.csv
[Mon Sep 26 11:04:59 2011] fullrun_mos2_xmm0112810301_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Sep 26 11:04:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112810301_pi300-10000_cl_pass0_src1.csv
[Mon Sep 26 11:04:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112810301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112810301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 11:05:00 2011] fullrun_mos2_xmm0112810301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Sep 26 11:05:00 2011] fullrun_mos2_xmm0112810301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Sep 26 11:05:00 2011] Fit fullrun_mos2_xmm0112810301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Sep 26 11:05:05 2011] Warning, spatial fit 1 centroid is now closest to src. 5
[Mon Sep 26 11:05:05 2011] Spatial fit model total counts = 972.227000, observed total counts = 970.000000
[Mon Sep 26 11:05:05 2011] Offset between fit and detection position for source 1 = 0.628410 pixels
[Mon Sep 26 11:05:05 2011] Warning, changing simple spatial fit ID from 1 to 2
[Mon Sep 26 11:05:05 2011] 966.781000 total counts/ 350.039000 bgd. counts: snr = 32.964410
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.628410 pixels
  Position = (298.4, 321.8) = 10 38 45.75 53 30 9.9
  Extent = 14.9 (14.5-29.9)" x 8.2 (7.1-9.1)", rotation angle = 65 (59-71) degrees
  Source counts = 616.7 +/- 31.1
  Background counts = 350.0
  Rate = 0.1 +/- 0.005
[Mon Sep 26 11:05:05 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 11:05:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 11:05:05 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 11:05:05 2011] Source does appear to be extended
[Mon Sep 26 11:05:05 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.60
[Mon Sep 26 11:05:05 2011] Source is asymmetric
[Mon Sep 26 11:05:05 2011] Source is confused with source 4
[Mon Sep 26 11:23:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 11:23:56 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 11:23:56 2011] Initial guess for spatial extent in simple fitting = 11.55"
[Mon Sep 26 11:23:56 2011] source mask rpix=2.7, npix_max = 39, mask sum = 28, frac = 0.703
[Mon Sep 26 11:23:56 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 11.55"
[Mon Sep 26 11:41:13 2011] fullrun_mos2_xmm0112810301_pi300-10000_cl_pass1_src1.ximg exists
[Mon Sep 26 11:41:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112810301_pi300-10000_cl_pass1_src1.csv
[Mon Sep 26 11:41:13 2011] fullrun_mos2_xmm0112810301_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Sep 26 11:41:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112810301_pi300-10000_cl_pass1_src1.csv
[Mon Sep 26 11:41:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112810301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112810301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 11:41:13 2011] fullrun_mos2_xmm0112810301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Sep 26 11:41:13 2011] fullrun_mos2_xmm0112810301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Sep 26 11:41:13 2011] Fit fullrun_mos2_xmm0112810301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Sep 26 11:41:16 2011] Warning, spatial fit 1 centroid is now closest to src. 5
[Mon Sep 26 11:41:16 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 11:41:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 11:41:16 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 11:41:16 2011] Source does appear to be extended
[Mon Sep 26 11:41:16 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.60
[Mon Sep 26 11:41:16 2011] Source is asymmetric
[Mon Sep 26 11:58:29 2011] XMMSAS src. selection expression = ellipse(25912.488000, 27945.574000, 895.866026, 490.303814, 64.708300, X, Y)
[Mon Sep 26 11:58:29 2011] Writing source region out to fullrun_mos2_xmm0112810301_pi300-10000_pass1_cl_src1_src.reg
[Mon Sep 26 11:58:29 2011] Extracting stamp from image fullrun_mos2_xmm0112810301_pi300-10000_cl_sm2.00.img.gz, (247, 270) - (350, 373)
[Mon Sep 26 11:58:29 2011] XMMSAS bgd. selection expression = annulus(25912.488000, 27945.574000, 1493.110043, 2986.220086, X, Y) && !ellipse(25756.346000, 28477.184000, 367.057611, 367.057611, 0.000000, X, Y) && !ellipse(25106.697205, 27061.916534, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Sep 26 11:58:29 2011] Writing fullrun_mos2_xmm0112810301_pi300-10000_pass1_cl_src1.gif
[Mon Sep 26 11:58:31 2011] Mean detx,y = (168.77, 139.15) 
[Mon Sep 26 11:58:31 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Sep 26 11:58:40 2011] Binned source spectrum to 10 counts/bin
[Mon Sep 26 11:58:40 2011] Setting source spectrum file to fullrun_mos2_xmm0112810301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Sep 26 11:58:40 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0112810301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Sep 26 12:03:42 2011] Updating aperture counts using extracted products
[Mon Sep 26 12:03:42 2011] Error reading totcts from fullrun_mos2_xmm0112810301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Sep 26 12:03:42 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 12:03:42 2011] Using photon index=1.80, rate=0.098, arf fullrun_mos2_xmm0112810301_pi300-10000_pass1_cl_src1.arf
[Mon Sep 26 12:03:42 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Sep 26 12:03:42 2011] Updating source flux to 1e-12
[Mon Sep 26 12:03:50 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Mon Sep 26 12:03:57 2011] Reading fit data from xmm0112810301/analysis//spectral/fullrun_mos2_xmm0112810301_pi300-10000_pass1_cl_src1_pl.csv
[Mon Sep 26 12:03:57 2011] Spectral fit parameter nH value = 6.77887e+20
[Mon Sep 26 12:03:57 2011] Spectral fit parameter PhoIndex value = 1.85648
[Mon Sep 26 12:03:57 2011] Failed to get F(0.3-8.0) from xmm0112810301/analysis//spectral/fullrun_mos2_xmm0112810301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Sep 26 12:03:57 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 12:03:57 2011] Using Nh = 6.8e+20, photon index=1.86, rate=0.098, arf fullrun_mos2_xmm0112810301_pi300-10000_pass1_cl_src1.arf
[Mon Sep 26 12:03:57 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Sep 26 12:03:57 2011] Updating source flux to 1.1e-12