[Fri Jun 22 08:29:54 2012] Detection parameters:
  Position = (384.4, 279.8) = 0 54 30.55 -37 43 16.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130.0 +/- 16.2
  Background counts = 38.2
  Rate = 0.006 +/- 0.0007

[Fri Jun 22 08:29:54 2012] Off-axis axis estimate = 6.38'
[Fri Jun 22 08:32:22 2012] Using EEF radius (= 9.62 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 08:32:22 2012] Initial guess for spatial extent in simple fitting = 9.62"
[Fri Jun 22 08:32:22 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.850
[Fri Jun 22 08:32:22 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 9.62"
[Fri Jun 22 11:51:27 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_src43.ximg exists
[Fri Jun 22 11:51:27 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_src43.csv
[Fri Jun 22 11:51:27 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_src43_1.ximg exists
[Fri Jun 22 11:51:27 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_src43.csv
[Fri Jun 22 11:51:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 11:51:28 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Fri Jun 22 11:51:28 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Fri Jun 22 11:51:28 2012] Fit fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Fri Jun 22 14:06:25 2012] Spatial fit model total counts = 373.000000, observed total counts = 373.000000
[Fri Jun 22 14:06:25 2012] Offset between fit and detection position for source 43 = 0.164058 pixels
[Fri Jun 22 14:06:25 2012] 372.555000 total counts/ 291.289000 bgd. counts: snr = 4.761533
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.164058 pixels
  Position = (384.3, 279.8) = 0 54 30.61 -37 43 16.5
  Extent = 4.5 (3.5-5.5)", rotation angle = 0
  Source counts = 81.3 +/- 19.3
  Background counts = 291.3
  Rate = 0.003 +/- 0.0006
[Fri Jun 22 14:06:25 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 14:06:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 14:06:25 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 14:06:25 2012] Source does appear to be extended
[Fri Jun 22 14:06:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 14:07:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 22 14:07:04 2012] Initial guess for spatial extent in simple fitting = 4.50"
[Fri Jun 22 14:07:04 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.955
[Fri Jun 22 14:07:04 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 4.50"
[Fri Jun 22 17:46:22 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_src43.ximg exists
[Fri Jun 22 17:46:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_src43.csv
[Fri Jun 22 17:46:22 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_src43_1.ximg exists
[Fri Jun 22 17:46:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_src43.csv
[Fri Jun 22 17:46:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 17:46:23 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Fri Jun 22 17:46:23 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Fri Jun 22 17:46:23 2012] Fit fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Fri Jun 22 19:20:35 2012] Spatial fit model total counts = 375.999000, observed total counts = 376.000000
[Fri Jun 22 19:20:35 2012] Offset between fit and detection position for source 43 = 0.001685 pixels
[Fri Jun 22 19:20:35 2012] 375.106200 total counts/ 293.816000 bgd. counts: snr = 4.742425
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.001685 pixels
  Position = (384.3, 279.8) = 0 54 30.61 -37 43 16.5
  Extent = 4.5 (3.5-5.5)", rotation angle = 0
  Source counts = 81.3 +/- 19.4
  Background counts = 293.8
  Rate = 0.003 +/- 0.0006
[Fri Jun 22 19:20:35 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 19:20:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 19:20:35 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 19:20:35 2012] Source does appear to be extended
[Fri Jun 22 19:20:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 19:21:01 2012] XMMSAS src. selection expression = ellipse(33383.107000, 24293.509440, 270.238208, 270.238208, 0.000000, X, Y)
[Fri Jun 22 19:21:01 2012] Writing source region out to fullrun_pn_xmm0112800201_pi300-10000_pass1_cl_src43_src.reg
[Fri Jun 22 19:21:01 2012] Extracting stamp from image fullrun_pn_xmm0112800201_pi300-10000_cl_sm2.00.img.gz, (369, 264) - (400, 295)
[Fri Jun 22 19:21:01 2012] XMMSAS bgd. selection expression = annulus(33383.107000, 24293.509440, 450.397013, 900.794026, X, Y) && !ellipse(34672.459778, 23434.344696, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 22 19:21:01 2012] Writing fullrun_pn_xmm0112800201_pi300-10000_pass1_cl_src43.gif
[Fri Jun 22 19:52:14 2012] Mean detx,y = (6443.02, 66.09) 
[Fri Jun 22 19:52:17 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 19:52:30 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 19:52:31 2012] Setting source spectrum file to fullrun_pn_xmm0112800201_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Fri Jun 22 19:52:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112800201_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Fri Jun 22 20:40:38 2012] Not generating rmf since there are only 81 counts
[Fri Jun 22 20:40:38 2012] rmf not generated due to insufficient counts
[Fri Jun 22 22:00:38 2012] Updating aperture counts using extracted products
[Fri Jun 22 22:00:38 2012] Error reading totcts from fullrun_pn_xmm0112800201_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Fri Jun 22 22:00:39 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 22:00:39 2012] Using photon index=1.80, rate=0.00269, arf fullrun_pn_xmm0112800201_pi300-10000_pass1_cl_src43.arf
[Fri Jun 22 22:00:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 22:00:39 2012] Updating source flux to 1.1e-14
[Fri Jun 22 23:30:04 2012] Source 43 has fewer than 100.000000 counts, skipping spectral fitting