[Fri Jun 22 08:29:54 2012] Detection parameters:
  Position = (344.4, 300.7) = 0 54 45.22 -37 41 46.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 319.4 +/- 23.3
  Background counts = 44.6
  Rate = 0.01 +/- 0.0009

[Fri Jun 22 08:29:54 2012] Off-axis axis estimate = 3.34'
[Fri Jun 22 08:32:22 2012] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 08:32:22 2012] Initial guess for spatial extent in simple fitting = 8.10"
[Fri Jun 22 08:32:22 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.121
[Fri Jun 22 08:32:22 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 8.10"
[Fri Jun 22 11:51:27 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_src41.ximg exists
[Fri Jun 22 11:51:27 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_src41.csv
[Fri Jun 22 11:51:27 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_src41_1.ximg exists
[Fri Jun 22 11:51:27 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_src41.csv
[Fri Jun 22 11:51:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 11:51:28 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Fri Jun 22 11:51:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src41.csv
[Fri Jun 22 11:51:28 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Fri Jun 22 11:51:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src41.csv
[Fri Jun 22 11:51:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 14:06:25 2012] Source 41 is offset by 4.126270 and -7.681376 pixels which is larger than
2 X fitted extent = 6.647770 x 6.647770, not incorporating fit results
[Fri Jun 22 14:06:25 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 14:06:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 14:06:25 2012] Assessing source extent using major
[Fri Jun 22 14:06:25 2012] Source does appear to be extended
[Fri Jun 22 14:06:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 14:07:04 2012] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 14:07:04 2012] Initial guess for spatial extent in simple fitting = 8.10"
[Fri Jun 22 14:07:04 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.121
[Fri Jun 22 14:07:04 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 8.10"
[Fri Jun 22 17:46:22 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_src41.ximg exists
[Fri Jun 22 17:46:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_src41.csv
[Fri Jun 22 17:46:22 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_src41_1.ximg exists
[Fri Jun 22 17:46:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_src41.csv
[Fri Jun 22 17:46:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 17:46:23 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Fri Jun 22 17:46:23 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Fri Jun 22 17:46:23 2012] Fit fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Fri Jun 22 19:20:35 2012] Spatial fit model total counts = 647.339000, observed total counts = 592.000000
[Fri Jun 22 19:20:35 2012] Offset between fit and detection position for source 41 = 0.123876 pixels
[Fri Jun 22 19:20:35 2012] 653.488000 total counts/ 461.594000 bgd. counts: snr = 8.931642
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 0.123876 pixels
  Position = (344.3, 300.6) = 0 54 45.26 -37 41 46.2
  Extent = 4.8 (4.1-5.5)", rotation angle = 0
  Source counts = 191.9 +/- 25.6
  Background counts = 461.6
  Rate = 0.006 +/- 0.0008
[Fri Jun 22 19:20:35 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 19:20:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 19:20:35 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 19:20:35 2012] Source does appear to be extended
[Fri Jun 22 19:20:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 19:21:01 2012] XMMSAS src. selection expression = ellipse(29907.540000, 26103.139200, 290.591411, 290.591411, 0.000000, X, Y)
[Fri Jun 22 19:21:01 2012] Writing source region out to fullrun_pn_xmm0112800201_pi300-10000_pass1_cl_src41_src.reg
[Fri Jun 22 19:21:01 2012] Extracting stamp from image fullrun_pn_xmm0112800201_pi300-10000_cl_sm2.00.img.gz, (328, 284) - (361, 317)
[Fri Jun 22 19:21:01 2012] XMMSAS bgd. selection expression = annulus(29907.540000, 26103.139200, 484.319019, 968.638037, X, Y) && !ellipse(28653.122740, 26451.295200, 384.402411, 384.402411, 0.000000, X, Y)
[Fri Jun 22 19:21:01 2012] Writing fullrun_pn_xmm0112800201_pi300-10000_pass1_cl_src41.gif
[Fri Jun 22 19:50:43 2012] Mean detx,y = (2546.68, -250.81) 
[Fri Jun 22 19:50:46 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 19:51:06 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 19:51:06 2012] Setting source spectrum file to fullrun_pn_xmm0112800201_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Fri Jun 22 19:51:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112800201_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Fri Jun 22 22:00:38 2012] Updating aperture counts using extracted products
[Fri Jun 22 22:00:38 2012] Error reading totcts from fullrun_pn_xmm0112800201_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Fri Jun 22 22:00:39 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 22:00:39 2012] Using photon index=1.80, rate=0.00635, arf fullrun_pn_xmm0112800201_pi300-10000_pass1_cl_src41.arf
[Fri Jun 22 22:00:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 22:00:39 2012] Updating source flux to 2.1e-14
[Fri Jun 22 23:30:04 2012] Flag b found in src. 41 procflags, skipping spectral fitting