[Fri Jun 22 08:29:53 2012] Detection parameters:
  Position = (147.5, 425.9) = 0 55 57.30 -37 32 39.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 165.0 +/- 20.7
  Background counts = 39.3
  Rate = 0.005 +/- 0.0007

[Fri Jun 22 08:29:54 2012] Off-axis axis estimate = 14.33'
[Fri Jun 22 08:32:22 2012] Using EEF radius (= 13.59 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 08:32:22 2012] Initial guess for spatial extent in simple fitting = 13.59"
[Fri Jun 22 08:32:22 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.066
[Fri Jun 22 08:32:22 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 13.59"
[Fri Jun 22 11:51:26 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_src13.ximg exists
[Fri Jun 22 11:51:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_src13.csv
[Fri Jun 22 11:51:26 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Jun 22 11:51:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_src13.csv
[Fri Jun 22 11:51:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 11:51:27 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Jun 22 11:51:27 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Jun 22 11:51:27 2012] Fit fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Jun 22 14:06:25 2012] Warning, spatial fit 13 centroid is now closest to src. 19
[Fri Jun 22 14:06:25 2012] Spatial fit model total counts = 2256.050000, observed total counts = 820.000000
[Fri Jun 22 14:06:25 2012] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 22 14:06:25 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 14:06:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 14:06:25 2012] Assessing source extent using major
[Fri Jun 22 14:06:25 2012] Source does appear to be extended
[Fri Jun 22 14:06:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 14:06:25 2012] Source is confused with source 11
[Fri Jun 22 14:07:03 2012] Using EEF radius (= 13.59 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 14:07:03 2012] Initial guess for spatial extent in simple fitting = 13.59"
[Fri Jun 22 14:07:03 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.066
[Fri Jun 22 14:07:03 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 13.59"
[Fri Jun 22 17:46:22 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_src13.ximg exists
[Fri Jun 22 17:46:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_src13.csv
[Fri Jun 22 17:46:22 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Jun 22 17:46:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_src13.csv
[Fri Jun 22 17:46:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 17:46:22 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Jun 22 17:46:22 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Jun 22 17:46:22 2012] Fit fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Jun 22 19:20:35 2012] Spatial fit model total counts = 1317.530000, observed total counts = 1234.000000
[Fri Jun 22 19:20:35 2012] Offset between fit and detection position for source 13 = 5.620106 pixels
[Fri Jun 22 19:20:35 2012] 1136.602000 total counts/ 725.245000 bgd. counts: snr = 15.274835
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 5.620106 pixels
  Position = (151.0, 430.3) = 0 55 56.02 -37 32 21.1
  Extent = 27.2 (27.1-54.4)", rotation angle = 0
  Source counts = 411.4 +/- 33.7
  Background counts = 725.2
  Rate = 0.01 +/- 0.001
[Fri Jun 22 19:20:35 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 19:20:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 19:20:35 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 19:20:35 2012] Source does appear to be extended
[Fri Jun 22 19:20:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 19:21:00 2012] XMMSAS src. selection expression = ellipse(13084.878000, 37391.226000, 1631.058047, 1631.058047, 0.000000, X, Y)
[Fri Jun 22 19:21:00 2012] Writing source region out to fullrun_pn_xmm0112800201_pi300-10000_pass1_cl_src13_src.reg
[Fri Jun 22 19:21:00 2012] Extracting stamp from image fullrun_pn_xmm0112800201_pi300-10000_cl_sm2.00.img.gz, (57, 337) - (245, 524)
[Fri Jun 22 19:21:00 2012] XMMSAS bgd. selection expression = annulus(13084.878000, 37391.226000, 2718.430078, 5436.860156, X, Y) && !ellipse(12674.620758, 37854.323883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12260.984451, 37174.522217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12284.834000, 36680.118000, 1338.304039, 1338.304039, 0.000000, X, Y) && !ellipse(11773.308670, 36231.094727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12915.605820, 35969.539825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11653.744736, 35612.034821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12358.390839, 35359.246826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11803.088806, 35198.758270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16526.824005, 33587.548431, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 22 19:21:00 2012] Writing fullrun_pn_xmm0112800201_pi300-10000_pass1_cl_src13.gif
[Fri Jun 22 19:31:24 2012] Mean detx,y = (-17337.64, -3841.24) 
[Fri Jun 22 19:31:28 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 19:32:35 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 19:32:36 2012] Setting source spectrum file to fullrun_pn_xmm0112800201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Jun 22 19:32:36 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112800201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Fri Jun 22 22:00:38 2012] Updating aperture counts using extracted products
[Fri Jun 22 22:00:38 2012] Error reading totcts from fullrun_pn_xmm0112800201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Jun 22 22:00:39 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 22:00:39 2012] Using photon index=1.80, rate=0.0136, arf fullrun_pn_xmm0112800201_pi300-10000_pass1_cl_src13.arf
[Fri Jun 22 22:00:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 22:00:39 2012] Updating source flux to 1.1e-13
[Fri Jun 22 23:30:04 2012] Flag p found in src. 13 procflags, skipping spectral fitting
[Fri Jun 22 23:30:04 2012] Flag c found in src. 13 procflags, skipping spectral fitting