[Fri Jun 22 08:29:53 2012] Detection parameters:
  Position = (276.9, 294.4) = 0 55 9.99 -37 42 12.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2748.2 +/- 62.4
  Background counts = 42.2
  Rate = 0.1 +/- 0.003

[Fri Jun 22 08:29:54 2012] Off-axis axis estimate = 1.59'
[Fri Jun 22 08:32:22 2012] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 08:32:22 2012] Initial guess for spatial extent in simple fitting = 7.22"
[Fri Jun 22 08:32:22 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.071
[Fri Jun 22 08:32:22 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.22"
[Fri Jun 22 11:51:26 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 22 11:51:26 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_src1.csv
[Fri Jun 22 11:51:26 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 22 11:51:26 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_src1.csv
[Fri Jun 22 11:51:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 11:51:27 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 22 11:51:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jun 22 11:51:27 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 22 11:51:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jun 22 11:51:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 14:06:25 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 18.088764 pixels away
[Fri Jun 22 14:06:25 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 14:06:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 14:06:25 2012] Assessing source extent using major
[Fri Jun 22 14:06:25 2012] Source does appear to be extended
[Fri Jun 22 14:06:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 14:07:03 2012] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 14:07:03 2012] Initial guess for spatial extent in simple fitting = 7.22"
[Fri Jun 22 14:07:03 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.071
[Fri Jun 22 14:07:03 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.22"
[Fri Jun 22 17:46:21 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 22 17:46:21 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 22 17:46:21 2012] Fit fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Jun 22 17:46:22 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 22 17:46:22 2012] fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 22 17:46:22 2012] Fit fullrun_pn_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 22 19:20:35 2012] Spatial fit model total counts = 2928.290000, observed total counts = 2694.000000
[Fri Jun 22 19:20:35 2012] Offset between fit and detection position for source 1 = 0.167743 pixels
[Fri Jun 22 19:20:35 2012] 2958.170000 total counts/ 1071.030000 bgd. counts: snr = 57.663806
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.167743 pixels
  Position = (276.8, 294.5) = 0 55 10.01 -37 42 12.7
  Extent = 5.5 (5.2-5.8)" x 5.0 (4.8-5.3)", rotation angle = 85 (56-109) degrees
  Source counts = 1887.1 +/- 54.4
  Background counts = 1071.0
  Rate = 0.06 +/- 0.002
[Fri Jun 22 19:20:35 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 19:20:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 19:20:35 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 19:20:35 2012] Source does appear to be extended
[Fri Jun 22 19:20:35 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.98
[Fri Jun 22 19:21:00 2012] Counts = 1887.140000, rescaling region sizes by 2.000000
[Fri Jun 22 19:21:00 2012] XMMSAS src. selection expression = ellipse(24033.663260, 25574.455000, 657.246019, 604.308017, 85.076966, X, Y)
[Fri Jun 22 19:21:00 2012] Writing source region out to fullrun_pn_xmm0112800201_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 22 19:21:00 2012] Extracting stamp from image fullrun_pn_xmm0112800201_pi300-10000_cl_sm2.00.img.gz, (239, 257) - (315, 332)
[Fri Jun 22 19:21:00 2012] XMMSAS bgd. selection expression = annulus(24033.663260, 25574.455000, 2190.820063, 4381.640126, X, Y) && !ellipse(20197.023666, 29870.871155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28701.698000, 29626.265200, 427.459212, 427.459212, 0.000000, X, Y) && !ellipse(23805.828430, 29279.142120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28653.122740, 26451.295200, 384.402411, 384.402411, 0.000000, X, Y) && !ellipse(27098.317420, 24384.312320, 509.118415, 348.524010, 90.000000, X, Y) && !ellipse(24593.851800, 23016.604200, 405.245612, 405.245612, 0.000000, X, Y) && !ellipse(22756.270940, 22634.464600, 469.886414, 469.886414, 0.000000, X, Y) && !ellipse(22240.404572, 22313.598419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29203.957001, 21365.085220, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 22 19:21:00 2012] Writing fullrun_pn_xmm0112800201_pi300-10000_pass1_cl_src1.gif
[Fri Jun 22 19:21:17 2012] Mean detx,y = (-2681.11, 2519.73) 
[Fri Jun 22 19:21:20 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 19:21:55 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 19:21:56 2012] Setting source spectrum file to fullrun_pn_xmm0112800201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 22 19:21:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112800201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 22 22:00:38 2012] Updating aperture counts using extracted products
[Fri Jun 22 22:00:38 2012] Error reading totcts from fullrun_pn_xmm0112800201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 22 22:00:39 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 22:00:39 2012] Using photon index=1.80, rate=0.0625, arf fullrun_pn_xmm0112800201_pi300-10000_pass1_cl_src1.arf
[Fri Jun 22 22:00:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 22:00:39 2012] Updating source flux to 2.2e-13
[Fri Jun 22 23:31:45 2012] Reading fit data from xmm0112800201/analysis//spectral/fullrun_pn_xmm0112800201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun 22 23:31:45 2012] Spectral fit parameter nH value = 3.08267e+20
[Fri Jun 22 23:31:45 2012] Spectral fit parameter PhoIndex value = 2.48718
[Fri Jun 22 23:31:45 2012] Failed to get F(0.3-8.0) from xmm0112800201/analysis//spectral/fullrun_pn_xmm0112800201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun 22 23:31:45 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 23:31:45 2012] Using Nh = 3.1e+20, photon index=2.49, rate=0.0625, arf fullrun_pn_xmm0112800201_pi300-10000_pass1_cl_src1.arf
[Fri Jun 22 23:31:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 23:31:45 2012] Updating source flux to 1.6e-13