[Fri Jun 22 08:30:40 2012] Detection parameters:
  Position = (346.4, 172.2) = 0 54 44.47 -37 51 5.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 125.4 +/- 14.2
  Background counts = 8.4
  Rate = 0.007 +/- 0.0007

[Fri Jun 22 08:30:40 2012] Off-axis axis estimate = 9.79'
[Fri Jun 22 12:58:09 2012] Using EEF radius (= 11.33 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 12:58:09 2012] Initial guess for spatial extent in simple fitting = 11.33"
[Fri Jun 22 12:58:09 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.934
[Fri Jun 22 12:58:09 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 11.33"
[Fri Jun 22 14:06:05 2012] fullrun_mos2_xmm0112800201_pi300-10000_cl_pass0_src7.ximg exists
[Fri Jun 22 14:06:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112800201_pi300-10000_cl_pass0_src7.csv
[Fri Jun 22 14:06:05 2012] fullrun_mos2_xmm0112800201_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Jun 22 14:06:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112800201_pi300-10000_cl_pass0_src7.csv
[Fri Jun 22 14:06:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112800201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112800201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 14:06:06 2012] fullrun_mos2_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Jun 22 14:06:06 2012] fullrun_mos2_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Jun 22 14:06:06 2012] Fit fullrun_mos2_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Jun 22 14:06:41 2012] Spatial fit model total counts = 180.998000, observed total counts = 181.000000
[Fri Jun 22 14:06:41 2012] Offset between fit and detection position for source 35 = 0.219890 pixels
[Fri Jun 22 14:06:41 2012] 181.586200 total counts/ 90.381500 bgd. counts: snr = 9.593508
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.219890 pixels
  Position = (346.3, 172.3) = 0 54 44.51 -37 51 4.1
  Extent = 6.3 (5.1-7.4)", rotation angle = 0
  Source counts = 91.2 +/- 13.5
  Background counts = 90.4
  Rate = 0.003 +/- 0.0004
[Fri Jun 22 14:06:42 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 14:06:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 14:06:42 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 14:06:42 2012] Source does appear to be extended
[Fri Jun 22 14:06:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 18:32:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 22 18:32:51 2012] Initial guess for spatial extent in simple fitting = 6.27"
[Fri Jun 22 18:32:51 2012] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.060
[Fri Jun 22 18:32:51 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 6.27"
[Fri Jun 22 19:20:25 2012] fullrun_mos2_xmm0112800201_pi300-10000_cl_pass1_src7.ximg exists
[Fri Jun 22 19:20:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112800201_pi300-10000_cl_pass1_src7.csv
[Fri Jun 22 19:20:25 2012] fullrun_mos2_xmm0112800201_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Jun 22 19:20:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112800201_pi300-10000_cl_pass1_src7.csv
[Fri Jun 22 19:20:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112800201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112800201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 19:20:26 2012] fullrun_mos2_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Jun 22 19:20:26 2012] fullrun_mos2_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Jun 22 19:20:26 2012] Fit fullrun_mos2_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Jun 22 19:20:47 2012] Spatial fit model total counts = 180.999000, observed total counts = 181.000000
[Fri Jun 22 19:20:47 2012] Offset between fit and detection position for source 35 = 0.002615 pixels
[Fri Jun 22 19:20:47 2012] 181.597900 total counts/ 90.597500 bgd. counts: snr = 9.560601
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.002615 pixels
  Position = (346.3, 172.3) = 0 54 44.51 -37 51 4.1
  Extent = 6.2 (5.1-7.4)", rotation angle = 0
  Source counts = 91.0 +/- 13.5
  Background counts = 90.6
  Rate = 0.003 +/- 0.0004
[Fri Jun 22 19:20:47 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 19:20:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 19:20:47 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 19:20:47 2012] Source does appear to be extended
[Fri Jun 22 19:20:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 21:28:28 2012] XMMSAS src. selection expression = ellipse(30077.876400, 14945.130200, 374.679611, 374.679611, 0.000000, X, Y)
[Fri Jun 22 21:28:28 2012] Writing source region out to fullrun_mos2_xmm0112800201_pi300-10000_pass1_cl_src35_src.reg
[Fri Jun 22 21:28:28 2012] Extracting stamp from image fullrun_mos2_xmm0112800201_pi300-10000_cl_sm2.00.img.gz, (325, 151) - (368, 194)
[Fri Jun 22 21:28:28 2012] XMMSAS bgd. selection expression = annulus(30077.876400, 14945.130200, 624.466018, 1248.932036, X, Y)
[Fri Jun 22 21:28:28 2012] Writing fullrun_mos2_xmm0112800201_pi300-10000_pass1_cl_src35.gif
[Fri Jun 22 21:29:55 2012] Mean detx,y = (-6992.29, -10031.74) 
[Fri Jun 22 21:29:56 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 21:30:03 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 21:30:03 2012] Setting source spectrum file to fullrun_mos2_xmm0112800201_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Fri Jun 22 21:30:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112800201_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Fri Jun 22 21:53:20 2012] Not generating rmf since there are only 91 counts
[Fri Jun 22 21:53:20 2012] rmf not generated due to insufficient counts
[Fri Jun 22 22:00:40 2012] Updating aperture counts using extracted products
[Fri Jun 22 22:00:40 2012] Error reading totcts from fullrun_mos2_xmm0112800201_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Fri Jun 22 22:00:41 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 22:00:41 2012] Using photon index=1.80, rate=0.00269, arf fullrun_mos2_xmm0112800201_pi300-10000_pass1_cl_src35.arf
[Fri Jun 22 22:00:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 22:00:41 2012] Updating source flux to 6.2e-14
[Fri Jun 22 22:02:59 2012] Source 35 has fewer than 100.000000 counts, skipping spectral fitting