[Fri Jun 22 08:30:40 2012] Detection parameters:
  Position = (459.4, 409.5) = 0 54 3.18 -37 33 48.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.5 +/- 8.3
  Background counts = 7.9
  Rate = 0.0009 +/- 0.0002

[Fri Jun 22 08:30:40 2012] Off-axis axis estimate = 14.18'
[Fri Jun 22 12:58:09 2012] Using EEF radius (= 13.52 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 12:58:09 2012] Initial guess for spatial extent in simple fitting = 13.52"
[Fri Jun 22 12:58:09 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.941
[Fri Jun 22 12:58:09 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 13.52"
[Fri Jun 22 14:06:06 2012] fullrun_mos2_xmm0112800201_pi300-10000_cl_pass0_src35.ximg exists
[Fri Jun 22 14:06:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112800201_pi300-10000_cl_pass0_src35.csv
[Fri Jun 22 14:06:06 2012] fullrun_mos2_xmm0112800201_pi300-10000_cl_pass0_src35_1.ximg exists
[Fri Jun 22 14:06:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112800201_pi300-10000_cl_pass0_src35.csv
[Fri Jun 22 14:06:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112800201_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112800201_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 14:06:06 2012] fullrun_mos2_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Fri Jun 22 14:06:06 2012] fullrun_mos2_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Fri Jun 22 14:06:06 2012] Fit fullrun_mos2_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Fri Jun 22 14:06:41 2012] Spatial fit model total counts = 113.547000, observed total counts = 113.000000
[Fri Jun 22 14:06:41 2012] Offset between fit and detection position for source 11 = 0.148795 pixels
[Fri Jun 22 14:06:41 2012] 115.129600 total counts/ 91.381900 bgd. counts: snr = 2.484228
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.148795 pixels
  Position = (459.3, 409.6) = 0 54 3.23 -37 33 51.2
  Extent = 7.0 (4.1-12.9)", rotation angle = 0
  Source counts = 23.7 +/- 10.7
  Background counts = 91.4
  Rate = 0.0007 +/- 0.0003
[Fri Jun 22 14:06:42 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 14:06:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 14:06:42 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 14:06:42 2012] Source does appear to be extended
[Fri Jun 22 14:06:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 18:32:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 22 18:32:51 2012] Initial guess for spatial extent in simple fitting = 6.97"
[Fri Jun 22 18:32:51 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.130
[Fri Jun 22 18:32:51 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 6.97"
[Fri Jun 22 19:20:25 2012] fullrun_mos2_xmm0112800201_pi300-10000_cl_pass1_src31.ximg exists
[Fri Jun 22 19:20:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112800201_pi300-10000_cl_pass1_src31.csv
[Fri Jun 22 19:20:25 2012] fullrun_mos2_xmm0112800201_pi300-10000_cl_pass1_src31_1.ximg exists
[Fri Jun 22 19:20:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112800201_pi300-10000_cl_pass1_src31.csv
[Fri Jun 22 19:20:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112800201_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112800201_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 19:20:26 2012] fullrun_mos2_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Fri Jun 22 19:20:26 2012] fullrun_mos2_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Fri Jun 22 19:20:26 2012] Fit fullrun_mos2_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Fri Jun 22 19:20:47 2012] Spatial fit model total counts = 97.884400, observed total counts = 99.000000
[Fri Jun 22 19:20:47 2012] Offset between fit and detection position for source 11 = 0.047498 pixels
[Fri Jun 22 19:20:47 2012] 99.435500 total counts/ 78.959600 bgd. counts: snr = 2.304308
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.047498 pixels
  Position = (459.3, 409.6) = 0 54 3.21 -37 33 51.4
  Extent = 6.3 (3.6-10.7)", rotation angle = 0
  Source counts = 20.5 +/- 10.0
  Background counts = 79.0
  Rate = 0.0006 +/- 0.0003
[Fri Jun 22 19:20:47 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 19:20:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 19:20:47 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 19:20:47 2012] Source does appear to be extended
[Fri Jun 22 19:20:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 21:28:28 2012] XMMSAS src. selection expression = ellipse(39914.455200, 35584.151400, 378.330611, 378.330611, 0.000000, X, Y)
[Fri Jun 22 21:28:28 2012] Writing source region out to fullrun_mos2_xmm0112800201_pi300-10000_pass1_cl_src11_src.reg
[Fri Jun 22 21:28:28 2012] Extracting stamp from image fullrun_mos2_xmm0112800201_pi300-10000_cl_sm2.00.img.gz, (438, 388) - (481, 431)
[Fri Jun 22 21:28:28 2012] XMMSAS bgd. selection expression = annulus(39914.455200, 35584.151400, 630.551018, 1261.102036, X, Y) && !ellipse(40740.082500, 35199.970400, 292.120008, 292.120008, 0.000000, X, Y)
[Fri Jun 22 21:28:28 2012] Writing fullrun_mos2_xmm0112800201_pi300-10000_pass1_cl_src11.gif
[Fri Jun 22 21:36:59 2012] Mean detx,y = (-7806.97, 12834.05) 
[Fri Jun 22 21:37:00 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 21:37:07 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 21:37:07 2012] Setting source spectrum file to fullrun_mos2_xmm0112800201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Jun 22 21:37:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112800201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Fri Jun 22 21:59:39 2012] Not generating rmf since there are only 20 counts
[Fri Jun 22 21:59:39 2012] rmf not generated due to insufficient counts
[Fri Jun 22 22:00:41 2012] Updating aperture counts using extracted products
[Fri Jun 22 22:00:41 2012] Error reading totcts from fullrun_mos2_xmm0112800201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Jun 22 22:00:41 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 22:00:41 2012] Using photon index=1.80, rate=0.000606, arf fullrun_mos2_xmm0112800201_pi300-10000_pass1_cl_src11.arf
[Fri Jun 22 22:00:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 22:00:41 2012] Updating source flux to 2.3e-14
[Fri Jun 22 22:02:59 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting