[Fri Jun 22 08:30:22 2012] Detection parameters:
  Position = (336.6, 247.0) = 0 54 48.10 -37 45 38.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.1 +/- 9.7
  Background counts = 10.7
  Rate = 0.002 +/- 0.0003

[Fri Jun 22 08:30:22 2012] Off-axis axis estimate = 4.64'
[Fri Jun 22 11:51:28 2012] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 11:51:28 2012] Initial guess for spatial extent in simple fitting = 8.75"
[Fri Jun 22 11:51:28 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.991
[Fri Jun 22 11:51:28 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 8.75"
[Fri Jun 22 12:58:08 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_src28.ximg exists
[Fri Jun 22 12:58:08 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_src28_1.ximg exists
[Fri Jun 22 12:58:08 2012] Fit fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_src28 appears to have run properly
[Fri Jun 22 12:58:08 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Fri Jun 22 12:58:08 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Fri Jun 22 12:58:08 2012] Fit fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Fri Jun 22 14:06:32 2012] Warning, spatial fit 28 centroid is now closest to src. 32
[Fri Jun 22 14:06:32 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 14:06:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 14:06:32 2012] Assessing source extent using major
[Fri Jun 22 14:06:32 2012] Source does appear to be extended
[Fri Jun 22 14:06:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 17:46:23 2012] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 17:46:23 2012] Initial guess for spatial extent in simple fitting = 8.75"
[Fri Jun 22 17:46:23 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.991
[Fri Jun 22 17:46:23 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 8.75"
[Fri Jun 22 18:32:51 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_src26.ximg exists
[Fri Jun 22 18:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_src26.csv
[Fri Jun 22 18:32:51 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_src26_1.ximg exists
[Fri Jun 22 18:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_src26.csv
[Fri Jun 22 18:32:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 18:32:51 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Fri Jun 22 18:32:51 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Fri Jun 22 18:32:51 2012] Fit fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Fri Jun 22 19:20:42 2012] Source 31 is offset by 6.777446 and 4.902603 pixels which is larger than
2 X fitted extent = 1.652101 x 1.652101, not incorporating fit results
[Fri Jun 22 19:20:42 2012] Source 31 is offset by 6.758974 and 4.902334 pixels which is larger than
2 X fitted extent = 1.773412 x 1.773412, not incorporating fit results
[Fri Jun 22 19:20:42 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 19:20:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 19:20:42 2012] Assessing source extent using major
[Fri Jun 22 19:20:42 2012] Source does appear to be extended
[Fri Jun 22 19:20:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 20:52:28 2012] XMMSAS src. selection expression = ellipse(29231.550720, 21444.213058, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 22 20:52:28 2012] Writing source region out to fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src31_src.reg
[Fri Jun 22 20:52:28 2012] Extracting stamp from image fullrun_mos1_xmm0112800201_pi300-10000_cl_sm2.00.img.gz, (299, 210) - (374, 285)
[Fri Jun 22 20:52:28 2012] XMMSAS bgd. selection expression = annulus(29231.550720, 21444.213058, 1087.500000, 2175.000000, X, Y) && !ellipse(30533.492297, 23728.157703, 318.827501, 297.557129, 357.813429, X, Y) && !ellipse(28642.746000, 21018.472000, 294.860008, 294.860008, 0.000000, X, Y)
[Fri Jun 22 20:52:28 2012] Writing fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src31.gif
[Fri Jun 22 20:59:56 2012] Mean detx,y = (-4212.20, 3471.68) 
[Fri Jun 22 20:59:57 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 21:00:07 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 21:00:07 2012] Setting source spectrum file to fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Fri Jun 22 21:00:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Fri Jun 22 21:27:31 2012] Not generating rmf since there are only 50 counts
[Fri Jun 22 21:27:31 2012] rmf not generated due to insufficient counts
[Fri Jun 22 22:00:40 2012] Updating aperture counts using extracted products
[Fri Jun 22 22:00:40 2012] Error reading totcts from fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Fri Jun 22 22:00:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 22:00:40 2012] Using photon index=1.80, rate=0.00176, arf fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src31.arf
[Fri Jun 22 22:00:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 22:00:40 2012] Updating source flux to 2.1e-14
[Fri Jun 22 22:00:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting