[Fri Jun 22 08:30:22 2012] Detection parameters:
  Position = (429.0, 467.9) = 0 54 14.37 -37 29 37.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 183.7 +/- 16.4
  Background counts = 8.1
  Rate = 0.005 +/- 0.0005

[Fri Jun 22 08:30:22 2012] Off-axis axis estimate = 15.51'
[Fri Jun 22 11:51:28 2012] Using EEF radius (= 14.18 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 11:51:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 22 11:51:28 2012] Initial guess for spatial extent in simple fitting = 14.18"
[Fri Jun 22 11:51:28 2012] source mask rpix=3.3, npix_max = 56, mask sum = 59, frac = 1.043
[Fri Jun 22 11:51:28 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 14.18"
[Fri Jun 22 12:58:08 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_src9.ximg exists
[Fri Jun 22 12:58:08 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri Jun 22 12:58:08 2012] Fit fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_src9 appears to have run properly
[Fri Jun 22 12:58:08 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri Jun 22 12:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src9.csv
[Fri Jun 22 12:58:08 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Jun 22 12:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src9.csv
[Fri Jun 22 12:58:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 14:06:32 2012] Spatial fit model total counts = 225.449000, observed total counts = 222.000000
[Fri Jun 22 14:06:32 2012] Offset between fit and detection position for source 3 = 0.608987 pixels
[Fri Jun 22 14:06:32 2012] 222.326000 total counts/ 121.767000 bgd. counts: snr = 9.112890
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.608987 pixels
  Position = (428.6, 468.4) = 0 54 14.52 -37 29 35.9
  Extent = 7.6" x 3.2", rotation angle = 40
  Source counts = 100.6 +/- 14.9
  Background counts = 121.8
  Rate = 0.003 +/- 0.0004
[Fri Jun 22 14:06:32 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 14:06:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 14:06:32 2012] Assessing source extent using major
[Fri Jun 22 14:06:32 2012] Source does appear to be extended
[Fri Jun 22 14:06:32 2012] Computing asymmetry using major and minor axis, asym = 2.41
[Fri Jun 22 14:06:32 2012] Source is asymmetric
[Fri Jun 22 17:46:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 22 17:46:23 2012] Initial guess for spatial extent in simple fitting = 5.40"
[Fri Jun 22 17:46:23 2012] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.742
[Fri Jun 22 17:46:23 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 5.40"
[Fri Jun 22 18:32:50 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_src8.ximg exists
[Fri Jun 22 18:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_src8.csv
[Fri Jun 22 18:32:51 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri Jun 22 18:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_src8.csv
[Fri Jun 22 18:32:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 18:32:51 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri Jun 22 18:32:51 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Jun 22 18:32:51 2012] Fit fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Fri Jun 22 19:20:41 2012] Spatial fit model total counts = 217.366000, observed total counts = 200.000000
[Fri Jun 22 19:20:41 2012] Offset between fit and detection position for source 3 = 0.457039 pixels
[Fri Jun 22 19:20:41 2012] 214.092300 total counts/ 94.496300 bgd. counts: snr = 12.302950
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.457039 pixels
  Position = (428.6, 467.9) = 0 54 14.51 -37 29 37.9
  Extent = 5.3 (4.5-6.1)", rotation angle = 0
  Source counts = 119.6 +/- 14.6
  Background counts = 94.5
  Rate = 0.004 +/- 0.0004
[Fri Jun 22 19:20:42 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 19:20:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 19:20:42 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 19:20:42 2012] Source does appear to be extended
[Fri Jun 22 19:20:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 20:52:28 2012] XMMSAS src. selection expression = ellipse(37237.459600, 40659.632400, 316.875609, 316.875609, 0.000000, X, Y)
[Fri Jun 22 20:52:28 2012] Writing source region out to fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src3_src.reg
[Fri Jun 22 20:52:28 2012] Extracting stamp from image fullrun_mos1_xmm0112800201_pi300-10000_cl_sm2.00.img.gz, (410, 450) - (447, 486)
[Fri Jun 22 20:52:28 2012] XMMSAS bgd. selection expression = annulus(37237.459600, 40659.632400, 528.126015, 1056.252030, X, Y)
[Fri Jun 22 20:52:28 2012] Writing fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src3.gif
[Fri Jun 22 20:54:14 2012] Mean detx,y = (16602.11, 3260.34) 
[Fri Jun 22 20:54:15 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 20:54:26 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 20:54:26 2012] Setting source spectrum file to fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun 22 20:54:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jun 22 22:00:40 2012] Updating aperture counts using extracted products
[Fri Jun 22 22:00:40 2012] Error reading totcts from fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun 22 22:00:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 22:00:40 2012] Using photon index=1.80, rate=0.00353, arf fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src3.arf
[Fri Jun 22 22:00:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 22:00:40 2012] Updating source flux to 1.3e-13