[Fri Jun 22 08:30:22 2012] Detection parameters:
  Position = (375.3, 260.0) = 0 54 33.88 -37 44 43.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.0 +/- 10.9
  Background counts = 10.8
  Rate = 0.003 +/- 0.0004

[Fri Jun 22 08:30:22 2012] Off-axis axis estimate = 6.23'
[Fri Jun 22 11:51:28 2012] Using EEF radius (= 9.54 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 11:51:28 2012] Initial guess for spatial extent in simple fitting = 9.54"
[Fri Jun 22 11:51:28 2012] source mask rpix=2.2, npix_max = 29, mask sum = 28, frac = 0.964
[Fri Jun 22 11:51:28 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 9.54"
[Fri Jun 22 12:58:08 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_src17.ximg exists
[Fri Jun 22 12:58:08 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri Jun 22 12:58:08 2012] Fit fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_src17 appears to have run properly
[Fri Jun 22 12:58:08 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri Jun 22 12:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Fri Jun 22 12:58:08 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Jun 22 12:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Fri Jun 22 12:58:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 14:06:32 2012] Spatial fit model total counts = 155.224000, observed total counts = 152.000000
[Fri Jun 22 14:06:32 2012] Offset between fit and detection position for source 29 = 0.132746 pixels
[Fri Jun 22 14:06:32 2012] 158.813200 total counts/ 108.154000 bgd. counts: snr = 4.871212
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.132746 pixels
  Position = (375.4, 260.1) = 0 54 33.87 -37 44 42.1
  Extent = 6.8" x 3.7", rotation angle = 91
  Source counts = 50.7 +/- 12.6
  Background counts = 108.2
  Rate = 0.001 +/- 0.0004
[Fri Jun 22 14:06:32 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 14:06:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 14:06:32 2012] Assessing source extent using major
[Fri Jun 22 14:06:32 2012] Source does appear to be extended
[Fri Jun 22 14:06:32 2012] Computing asymmetry using major and minor axis, asym = 1.87
[Fri Jun 22 14:06:32 2012] Source is asymmetric
[Fri Jun 22 17:46:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 22 17:46:23 2012] Initial guess for spatial extent in simple fitting = 5.24"
[Fri Jun 22 17:46:23 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.031
[Fri Jun 22 17:46:23 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 5.24"
[Fri Jun 22 18:32:51 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_src15.ximg exists
[Fri Jun 22 18:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_src15.csv
[Fri Jun 22 18:32:51 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_src15_1.ximg exists
[Fri Jun 22 18:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_src15.csv
[Fri Jun 22 18:32:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 18:32:51 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Fri Jun 22 18:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src15.csv
[Fri Jun 22 18:32:51 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Fri Jun 22 18:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src15.csv
[Fri Jun 22 18:32:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 19:20:41 2012] Warning, spatial fit 15 centroid is now closest to src. 25
[Fri Jun 22 19:20:42 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 19:20:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 19:20:42 2012] Assessing source extent using major
[Fri Jun 22 19:20:42 2012] Source does appear to be extended
[Fri Jun 22 19:20:42 2012] Computing asymmetry using major and minor axis, asym = 1.87
[Fri Jun 22 19:20:42 2012] Source is asymmetric
[Fri Jun 22 20:52:28 2012] XMMSAS src. selection expression = ellipse(32607.752092, 22583.665271, 409.888980, 219.364834, 91.084097, X, Y)
[Fri Jun 22 20:52:28 2012] Writing source region out to fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src29_src.reg
[Fri Jun 22 20:52:28 2012] Extracting stamp from image fullrun_mos1_xmm0112800201_pi300-10000_cl_sm2.00.img.gz, (352, 237) - (399, 284)
[Fri Jun 22 20:52:28 2012] XMMSAS bgd. selection expression = annulus(32607.752092, 22583.665271, 683.148300, 1366.296600, X, Y) && !ellipse(33390.739075, 24292.134216, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 22 20:52:28 2012] Writing fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src29.gif
[Fri Jun 22 20:56:41 2012] Mean detx,y = (-1835.81, 6081.90) 
[Fri Jun 22 20:56:42 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 20:56:54 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 20:56:54 2012] Setting source spectrum file to fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Fri Jun 22 20:56:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Fri Jun 22 21:26:09 2012] Not generating rmf since there are only 50 counts
[Fri Jun 22 21:26:09 2012] rmf not generated due to insufficient counts
[Fri Jun 22 22:00:40 2012] Updating aperture counts using extracted products
[Fri Jun 22 22:00:40 2012] Error reading totcts from fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Fri Jun 22 22:00:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 22:00:40 2012] Using photon index=1.80, rate=0.0015, arf fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src29.arf
[Fri Jun 22 22:00:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 22:00:40 2012] Updating source flux to 2.5e-14
[Fri Jun 22 22:00:43 2012] Source 29 has fewer than 100.000000 counts, skipping spectral fitting