[Fri Jun 22 08:30:22 2012] Detection parameters:
  Position = (357.0, 312.1) = 0 54 40.62 -37 40 49.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 186.6 +/- 19.2
  Background counts = 11.9
  Rate = 0.007 +/- 0.0007

[Fri Jun 22 08:30:22 2012] Off-axis axis estimate = 4.36'
[Fri Jun 22 11:51:28 2012] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 11:51:28 2012] Initial guess for spatial extent in simple fitting = 8.61"
[Fri Jun 22 11:51:28 2012] source mask rpix=2.0, npix_max = 24, mask sum = 16, frac = 0.651
[Fri Jun 22 11:51:28 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 8.61"
[Fri Jun 22 12:58:08 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_src6.ximg exists
[Fri Jun 22 12:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_src6.csv
[Fri Jun 22 12:58:08 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Jun 22 12:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_src6.csv
[Fri Jun 22 12:58:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 12:58:08 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Jun 22 12:58:08 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Jun 22 12:58:08 2012] Fit fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Jun 22 14:06:32 2012] Spatial fit model total counts = 236.402000, observed total counts = 240.000000
[Fri Jun 22 14:06:32 2012] Offset between fit and detection position for source 21 = 1.512533 pixels
[Fri Jun 22 14:06:32 2012] 235.181000 total counts/ 119.622000 bgd. counts: snr = 10.565699
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 1.512533 pixels
  Position = (356.4, 313.5) = 0 54 40.82 -37 40 49.9
  Extent = 6.1 (4.5-8.5)", rotation angle = 0
  Source counts = 115.6 +/- 15.3
  Background counts = 119.6
  Rate = 0.003 +/- 0.0005
[Fri Jun 22 14:06:32 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 14:06:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 14:06:32 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 14:06:32 2012] Source does appear to be extended
[Fri Jun 22 14:06:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 17:46:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 22 17:46:23 2012] Initial guess for spatial extent in simple fitting = 6.09"
[Fri Jun 22 17:46:23 2012] source mask rpix=1.4, npix_max = 14, mask sum = 6, frac = 0.416
[Fri Jun 22 17:46:23 2012] Skipping simple spatial due to low active detector fraction
[Fri Jun 22 19:20:42 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 19:20:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 19:20:42 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 19:20:42 2012] Source does appear to be extended
[Fri Jun 22 19:20:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 20:52:28 2012] XMMSAS src. selection expression = ellipse(30962.162400, 27228.617000, 365.166011, 365.166011, 0.000000, X, Y)
[Fri Jun 22 20:52:28 2012] Writing source region out to fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src21_src.reg
[Fri Jun 22 20:52:28 2012] Extracting stamp from image fullrun_mos1_xmm0112800201_pi300-10000_cl_sm2.00.img.gz, (335, 293) - (377, 335)
[Fri Jun 22 20:52:28 2012] XMMSAS bgd. selection expression = annulus(30962.162400, 27228.617000, 608.610018, 1217.220035, X, Y) && !ellipse(29941.569275, 26071.025085, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 22 20:52:28 2012] Writing fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src21.gif
[Fri Jun 22 20:53:33 2012] Mean detx,y = (1782.50, 2756.85) 
[Fri Jun 22 20:53:34 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 20:53:41 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 20:53:41 2012] Setting source spectrum file to fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri Jun 22 20:53:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Fri Jun 22 22:00:40 2012] Updating aperture counts using extracted products
[Fri Jun 22 22:00:40 2012] Error reading totcts from fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri Jun 22 22:00:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 22:00:40 2012] Using photon index=1.80, rate=0.00341, arf fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src21.arf
[Fri Jun 22 22:00:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 22:00:40 2012] Updating source flux to 4.8e-14