[Fri Jun 22 08:30:22 2012] Detection parameters:
  Position = (332.6, 327.2) = 0 54 49.55 -37 40 2.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.1 +/- 15.0
  Background counts = 11.8
  Rate = 0.003 +/- 0.0006

[Fri Jun 22 08:30:22 2012] Off-axis axis estimate = 3.24'
[Fri Jun 22 11:51:28 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 11:51:28 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Fri Jun 22 11:51:28 2012] source mask rpix=1.8, npix_max = 22, mask sum = 17, frac = 0.770
[Fri Jun 22 11:51:28 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.05"
[Fri Jun 22 12:58:08 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_src13.ximg exists
[Fri Jun 22 12:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_src13.csv
[Fri Jun 22 12:58:08 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Jun 22 12:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_src13.csv
[Fri Jun 22 12:58:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 12:58:08 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Jun 22 12:58:08 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Jun 22 12:58:08 2012] Fit fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Jun 22 14:06:32 2012] Spatial fit model total counts = 211.760000, observed total counts = 209.000000
[Fri Jun 22 14:06:32 2012] Offset between fit and detection position for source 19 = 1.822729 pixels
[Fri Jun 22 14:06:32 2012] 211.644500 total counts/ 150.095000 bgd. counts: snr = 5.023905
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 1.822729 pixels
  Position = (331.8, 325.6) = 0 54 49.87 -37 39 57.7
  Extent = 9.7 (6.6-15.2)", rotation angle = 0
  Source counts = 61.5 +/- 14.5
  Background counts = 150.1
  Rate = 0.002 +/- 0.0004
[Fri Jun 22 14:06:32 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 14:06:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 14:06:32 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 14:06:32 2012] Source does appear to be extended
[Fri Jun 22 14:06:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 17:46:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 22 17:46:23 2012] Initial guess for spatial extent in simple fitting = 9.71"
[Fri Jun 22 17:46:23 2012] source mask rpix=2.2, npix_max = 29, mask sum = 13, frac = 0.435
[Fri Jun 22 17:46:23 2012] Skipping simple spatial due to low active detector fraction
[Fri Jun 22 19:20:42 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 19:20:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 19:20:42 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 19:20:42 2012] Source does appear to be extended
[Fri Jun 22 19:20:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 20:52:28 2012] XMMSAS src. selection expression = ellipse(28815.256800, 28274.430000, 582.690617, 582.690617, 0.000000, X, Y)
[Fri Jun 22 20:52:28 2012] Writing source region out to fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src19_src.reg
[Fri Jun 22 20:52:28 2012] Extracting stamp from image fullrun_mos1_xmm0112800201_pi300-10000_cl_sm2.00.img.gz, (298, 292) - (365, 359)
[Fri Jun 22 20:52:28 2012] XMMSAS bgd. selection expression = annulus(28815.256800, 28274.430000, 971.151028, 1942.302056, X, Y) && !ellipse(28718.423000, 29630.767600, 381.990411, 381.990411, 0.000000, X, Y) && !ellipse(30962.162400, 27228.617000, 486.888014, 486.888014, 0.000000, X, Y) && !ellipse(29941.569275, 26071.025085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28034.091800, 26484.581400, 327.175209, 327.175209, 0.000000, X, Y)
[Fri Jun 22 20:52:28 2012] Writing fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src19.gif
[Fri Jun 22 20:55:17 2012] Mean detx,y = (1884.99, 373.91) 
[Fri Jun 22 20:55:18 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 20:55:27 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 20:55:27 2012] Setting source spectrum file to fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Jun 22 20:55:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Fri Jun 22 21:25:33 2012] Not generating rmf since there are only 61 counts
[Fri Jun 22 21:25:33 2012] rmf not generated due to insufficient counts
[Fri Jun 22 22:00:40 2012] Updating aperture counts using extracted products
[Fri Jun 22 22:00:40 2012] Error reading totcts from fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Jun 22 22:00:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 22:00:40 2012] Using photon index=1.80, rate=0.00182, arf fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src19.arf
[Fri Jun 22 22:00:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 22:00:40 2012] Updating source flux to 2.5e-14
[Fri Jun 22 22:00:43 2012] Source 19 has fewer than 100.000000 counts, skipping spectral fitting