[Fri Jun 22 08:30:22 2012] Detection parameters:
  Position = (232.7, 343.3) = 0 55 26.16 -37 38 35.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.6 +/- 9.7
  Background counts = 8.6
  Rate = 0.003 +/- 0.0005

[Fri Jun 22 08:30:22 2012] Off-axis axis estimate = 5.77'
[Fri Jun 22 11:51:28 2012] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 11:51:28 2012] Initial guess for spatial extent in simple fitting = 9.31"
[Fri Jun 22 11:51:28 2012] source mask rpix=2.1, npix_max = 27, mask sum = 21, frac = 0.753
[Fri Jun 22 11:51:28 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 9.31"
[Fri Jun 22 12:58:08 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_src14.ximg exists
[Fri Jun 22 12:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_src14.csv
[Fri Jun 22 12:58:08 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_src14_1.ximg exists
[Fri Jun 22 12:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_src14.csv
[Fri Jun 22 12:58:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 12:58:08 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Fri Jun 22 12:58:08 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Fri Jun 22 12:58:08 2012] Fit fullrun_mos1_xmm0112800201_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Fri Jun 22 14:06:32 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 12.836232 pixels away
[Fri Jun 22 14:06:32 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 14:06:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 14:06:32 2012] Assessing source extent using major
[Fri Jun 22 14:06:32 2012] Source does appear to be extended
[Fri Jun 22 14:06:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 17:46:23 2012] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 17:46:23 2012] Initial guess for spatial extent in simple fitting = 9.31"
[Fri Jun 22 17:46:23 2012] source mask rpix=2.1, npix_max = 27, mask sum = 21, frac = 0.753
[Fri Jun 22 17:46:23 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 9.31"
[Fri Jun 22 18:32:51 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_src12.ximg exists
[Fri Jun 22 18:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_src12.csv
[Fri Jun 22 18:32:51 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri Jun 22 18:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_src12.csv
[Fri Jun 22 18:32:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 18:32:51 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri Jun 22 18:32:51 2012] fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Jun 22 18:32:51 2012] Fit fullrun_mos1_xmm0112800201_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Fri Jun 22 19:20:41 2012] Spatial fit model total counts = 149.658000, observed total counts = 139.000000
[Fri Jun 22 19:20:41 2012] Offset between fit and detection position for source 16 = 1.074363 pixels
[Fri Jun 22 19:20:41 2012] 148.927100 total counts/ 67.555900 bgd. counts: snr = 9.900089
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 1.074363 pixels
  Position = (233.0, 344.3) = 0 55 26.06 -37 38 35.9
  Extent = 13.3 (2.6-18.6)", rotation angle = 0
  Source counts = 81.4 +/- 12.2
  Background counts = 67.6
  Rate = 0.002 +/- 0.0004
[Fri Jun 22 19:20:42 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 19:20:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 19:20:42 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 19:20:42 2012] Source does appear to be extended
[Fri Jun 22 19:20:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 20:52:28 2012] XMMSAS src. selection expression = ellipse(20219.720080, 29908.794800, 797.442023, 797.442023, 0.000000, X, Y)
[Fri Jun 22 20:52:28 2012] Writing source region out to fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src16_src.reg
[Fri Jun 22 20:52:28 2012] Extracting stamp from image fullrun_mos1_xmm0112800201_pi300-10000_cl_sm2.00.img.gz, (187, 299) - (279, 390)
[Fri Jun 22 20:52:28 2012] XMMSAS bgd. selection expression = annulus(20219.720080, 29908.794800, 1329.070038, 2658.140076, X, Y) && !ellipse(19881.823898, 31937.240631, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 22 20:52:28 2012] Writing fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src16.gif
[Fri Jun 22 20:55:30 2012] Mean detx,y = (-0.52, -8178.66) 
[Fri Jun 22 20:55:31 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 20:56:12 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 20:56:13 2012] Setting source spectrum file to fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Jun 22 20:56:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Fri Jun 22 21:25:39 2012] Not generating rmf since there are only 81 counts
[Fri Jun 22 21:25:39 2012] rmf not generated due to insufficient counts
[Fri Jun 22 22:00:40 2012] Updating aperture counts using extracted products
[Fri Jun 22 22:00:40 2012] Error reading totcts from fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Jun 22 22:00:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 22:00:40 2012] Using photon index=1.80, rate=0.0024, arf fullrun_mos1_xmm0112800201_pi300-10000_pass1_cl_src16.arf
[Fri Jun 22 22:00:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 22:00:40 2012] Updating source flux to 9.4e-14
[Fri Jun 22 22:00:43 2012] Source 16 has fewer than 100.000000 counts, skipping spectral fitting