[Thu Jun 14 10:16:43 2012] Detection parameters:
  Position = (383.7, 281.7) = 0 54 30.39 -37 43 16.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 164.6 +/- 17.7
  Background counts = 30.4
  Rate = 0.006 +/- 0.0006

[Thu Jun 14 10:16:43 2012] Off-axis axis estimate = 6.30'
[Thu Jun 14 10:19:23 2012] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 10:19:23 2012] Initial guess for spatial extent in simple fitting = 9.58"
[Thu Jun 14 10:19:23 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.856
[Thu Jun 14 10:19:23 2012] Giving source the simple spatial ID 56 for pass 0, mean size = 9.58"
[Thu Jun 14 13:30:26 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_src56.ximg exists
[Thu Jun 14 13:30:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_src56.csv
[Thu Jun 14 13:30:26 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_src56_1.ximg exists
[Thu Jun 14 13:30:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_src56.csv
[Thu Jun 14 13:30:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 13:30:28 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Thu Jun 14 13:30:28 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Thu Jun 14 13:30:28 2012] Fit fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src56 appears to have run properly
[Thu Jun 14 15:23:38 2012] Warning: source 56 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 58 at 11.303188 pixels away
[Thu Jun 14 15:23:38 2012] Source 58 is offset by -7.771582 and 3.114936 pixels which is larger than
2 X fitted extent = 0.821715 x 0.821715, not incorporating fit results
[Thu Jun 14 15:23:38 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 15:23:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 15:23:38 2012] Assessing source extent using major
[Thu Jun 14 15:23:38 2012] Source does appear to be extended
[Thu Jun 14 15:23:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 15:24:07 2012] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 15:24:07 2012] Initial guess for spatial extent in simple fitting = 9.58"
[Thu Jun 14 15:24:07 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.856
[Thu Jun 14 15:24:07 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 9.58"
[Thu Jun 14 18:30:13 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src52.ximg exists
[Thu Jun 14 18:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src52.csv
[Thu Jun 14 18:30:13 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src52_1.ximg exists
[Thu Jun 14 18:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src52.csv
[Thu Jun 14 18:30:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 18:30:14 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Thu Jun 14 18:30:14 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Thu Jun 14 18:30:14 2012] Fit fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly
[Thu Jun 14 20:12:02 2012] Spatial fit model total counts = 496.339000, observed total counts = 495.000000
[Thu Jun 14 20:12:02 2012] Offset between fit and detection position for source 58 = 0.158503 pixels
[Thu Jun 14 20:12:02 2012] 500.037000 total counts/ 375.284000 bgd. counts: snr = 6.439779
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 0.158503 pixels
  Position = (383.6, 281.5) = 0 54 30.40 -37 43 16.6
  Extent = 6.0 (4.9-7.1)", rotation angle = 0
  Source counts = 124.8 +/- 22.4
  Background counts = 375.3
  Rate = 0.003 +/- 0.0006
[Thu Jun 14 20:12:02 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 20:12:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 20:12:02 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 20:12:02 2012] Source does appear to be extended
[Thu Jun 14 20:12:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:12:34 2012] XMMSAS src. selection expression = ellipse(33325.346800, 24445.250800, 361.419610, 361.419610, 0.000000, X, Y)
[Thu Jun 14 20:12:34 2012] Writing source region out to fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src58_src.reg
[Thu Jun 14 20:12:34 2012] Extracting stamp from image fullrun_pn_xmm0112800101_pi300-10000_cl_sm2.00.img.gz, (363, 261) - (404, 302)
[Thu Jun 14 20:12:34 2012] XMMSAS bgd. selection expression = annulus(33325.346800, 24445.250800, 602.366017, 1204.732035, X, Y) && !ellipse(31680.438232, 25034.137909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35299.872406, 24529.857574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34598.488007, 23604.234711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34566.040894, 22742.720184, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 14 20:12:34 2012] Writing fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src58.gif
[Thu Jun 14 20:43:54 2012] Mean detx,y = (6449.95, 637.32) 
[Thu Jun 14 20:43:55 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 20:44:08 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 20:44:08 2012] Setting source spectrum file to fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Thu Jun 14 20:44:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Thu Jun 14 23:50:44 2012] Updating aperture counts using extracted products
[Thu Jun 14 23:50:44 2012] Error reading totcts from fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Thu Jun 14 23:50:45 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 23:50:45 2012] Using photon index=1.80, rate=0.00312, arf fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src58.arf
[Thu Jun 14 23:50:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 23:50:45 2012] Updating source flux to 1.2e-14
[Thu Jun 14 23:53:02 2012] Flag b found in src. 58 procflags, skipping spectral fitting