[Thu Jun 14 10:16:43 2012] Detection parameters:
  Position = (381.2, 347.4) = 0 54 31.32 -37 38 28.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.5 +/- 13.4
  Background counts = 28.7
  Rate = 0.003 +/- 0.0005

[Thu Jun 14 10:16:43 2012] Off-axis axis estimate = 6.97'
[Thu Jun 14 10:19:23 2012] Using EEF radius (= 9.91 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 10:19:23 2012] Initial guess for spatial extent in simple fitting = 9.91"
[Thu Jun 14 10:19:23 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.971
[Thu Jun 14 10:19:23 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 9.91"
[Thu Jun 14 13:30:26 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_src39.ximg exists
[Thu Jun 14 13:30:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_src39.csv
[Thu Jun 14 13:30:26 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_src39_1.ximg exists
[Thu Jun 14 13:30:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_src39.csv
[Thu Jun 14 13:30:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 13:30:28 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Thu Jun 14 13:30:28 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Thu Jun 14 13:30:28 2012] Fit fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Thu Jun 14 15:23:38 2012] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 11.609891 pixels away
[Thu Jun 14 15:23:38 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 15:23:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 15:23:38 2012] Assessing source extent using major
[Thu Jun 14 15:23:38 2012] Source does appear to be extended
[Thu Jun 14 15:23:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 15:24:07 2012] Using EEF radius (= 9.91 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 15:24:07 2012] Initial guess for spatial extent in simple fitting = 9.91"
[Thu Jun 14 15:24:07 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.971
[Thu Jun 14 15:24:07 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 9.91"
[Thu Jun 14 18:30:13 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src37.ximg exists
[Thu Jun 14 18:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src37.csv
[Thu Jun 14 18:30:13 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src37_1.ximg exists
[Thu Jun 14 18:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src37.csv
[Thu Jun 14 18:30:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 18:30:14 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Thu Jun 14 18:30:14 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Thu Jun 14 18:30:14 2012] Fit fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Thu Jun 14 20:12:02 2012] Spatial fit model total counts = 433.079000, observed total counts = 429.000000
[Thu Jun 14 20:12:02 2012] Offset between fit and detection position for source 41 = 0.215937 pixels
[Thu Jun 14 20:12:02 2012] 434.640400 total counts/ 365.963000 bgd. counts: snr = 3.590007
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 0.215937 pixels
  Position = (381.0, 347.3) = 0 54 31.38 -37 38 30.5
  Extent = 6.8 (4.5-9.3)", rotation angle = 0
  Source counts = 68.7 +/- 20.8
  Background counts = 366.0
  Rate = 0.002 +/- 0.0005
[Thu Jun 14 20:12:02 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 20:12:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 20:12:02 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 20:12:02 2012] Source does appear to be extended
[Thu Jun 14 20:12:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:12:34 2012] XMMSAS src. selection expression = ellipse(33100.842940, 30165.855400, 406.641612, 406.641612, 0.000000, X, Y)
[Thu Jun 14 20:12:34 2012] Writing source region out to fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src41_src.reg
[Thu Jun 14 20:12:34 2012] Extracting stamp from image fullrun_pn_xmm0112800101_pi300-10000_cl_sm2.00.img.gz, (358, 324) - (404, 371)
[Thu Jun 14 20:12:34 2012] XMMSAS bgd. selection expression = annulus(33100.842940, 30165.855400, 677.736020, 1355.472039, X, Y)
[Thu Jun 14 20:12:34 2012] Writing fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src41.gif
[Thu Jun 14 20:36:58 2012] Mean detx,y = (4502.86, -4742.55) 
[Thu Jun 14 20:37:00 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 20:37:15 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 20:37:16 2012] Setting source spectrum file to fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Thu Jun 14 20:37:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Thu Jun 14 21:19:54 2012] Not generating rmf since there are only 68 counts
[Thu Jun 14 21:19:54 2012] rmf not generated due to insufficient counts
[Thu Jun 14 23:50:44 2012] Updating aperture counts using extracted products
[Thu Jun 14 23:50:44 2012] Error reading totcts from fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Thu Jun 14 23:50:45 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 23:50:45 2012] Using photon index=1.80, rate=0.00172, arf fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src41.arf
[Thu Jun 14 23:50:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 23:50:45 2012] Updating source flux to 6.4e-15
[Thu Jun 14 23:53:02 2012] Source 41 has fewer than 100.000000 counts, skipping spectral fitting