[Thu Jun 14 10:16:42 2012] Detection parameters:
  Position = (230.5, 445.0) = 0 55 26.47 -37 31 23.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1534.0 +/- 48.6
  Background counts = 22.4
  Rate = 0.04 +/- 0.001

[Thu Jun 14 10:16:43 2012] Off-axis axis estimate = 11.71'
[Thu Jun 14 10:19:23 2012] Using EEF radius (= 12.28 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 10:19:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 14 10:19:23 2012] Initial guess for spatial extent in simple fitting = 12.28"
[Thu Jun 14 10:19:23 2012] source mask rpix=2.8, npix_max = 44, mask sum = 27, frac = 0.611
[Thu Jun 14 10:19:23 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.28"
[Thu Jun 14 13:30:25 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun 14 13:30:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_src3.csv
[Thu Jun 14 13:30:25 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun 14 13:30:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_src3.csv
[Thu Jun 14 13:30:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 13:30:27 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun 14 13:30:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun 14 13:30:27 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun 14 13:30:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun 14 13:30:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 15:23:38 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.362814 pixels away
[Thu Jun 14 15:23:38 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 15:23:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 15:23:38 2012] Assessing source extent using major
[Thu Jun 14 15:23:38 2012] Source does appear to be extended
[Thu Jun 14 15:23:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 15:24:07 2012] Using EEF radius (= 12.28 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 15:24:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 14 15:24:07 2012] Initial guess for spatial extent in simple fitting = 12.28"
[Thu Jun 14 15:24:07 2012] source mask rpix=2.8, npix_max = 44, mask sum = 27, frac = 0.611
[Thu Jun 14 15:24:07 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 12.28"
[Thu Jun 14 18:30:12 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jun 14 18:30:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src3.csv
[Thu Jun 14 18:30:12 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jun 14 18:30:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src3.csv
[Thu Jun 14 18:30:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 18:30:13 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jun 14 18:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Jun 14 18:30:13 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jun 14 18:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Jun 14 18:30:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 20:12:02 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.362856 pixels away
[Thu Jun 14 20:12:02 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 20:12:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 20:12:02 2012] Assessing source extent using major
[Thu Jun 14 20:12:02 2012] Source does appear to be extended
[Thu Jun 14 20:12:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:12:33 2012] Counts = 1534.015747, rescaling region sizes by 2.000000
[Thu Jun 14 20:12:33 2012] XMMSAS src. selection expression = ellipse(20005.002655, 38662.618347, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Jun 14 20:12:33 2012] Writing source region out to fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src3_src.reg
[Thu Jun 14 20:12:33 2012] Extracting stamp from image fullrun_pn_xmm0112800101_pi300-10000_cl_sm2.00.img.gz, (156, 370) - (306, 520)
[Thu Jun 14 20:12:33 2012] XMMSAS bgd. selection expression = annulus(20005.002655, 38662.618347, 4350.000000, 8700.000000, X, Y) && !ellipse(11812.654000, 37340.808000, 1558.264045, 645.158419, 138.286000, X, Y) && !ellipse(21224.574400, 41170.882600, 532.738415, 532.738415, 0.000000, X, Y) && !ellipse(25239.180511, 44736.236816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28878.994690, 41630.646393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13278.614000, 38869.066000, 2228.456064, 2228.456064, 0.000000, X, Y) && !ellipse(11998.153809, 38384.665985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12618.573090, 38045.207214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12776.712800, 37480.052000, 2193.920063, 2193.920063, 0.000000, X, Y) && !ellipse(29284.351288, 36895.059143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11847.332000, 36825.282000, 2125.480061, 2125.480061, 0.000000, X, Y) && !ellipse(12463.520706, 36504.398132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12909.261627, 35993.148346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12325.423340, 35888.715424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11663.313461, 35714.880035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11430.609436, 35113.489349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11400.760000, 36349.968000, 2128.664061, 2128.664061, 0.000000, X, Y) && !ellipse(11604.839096, 34535.736389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28343.387665, 33683.466675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16456.394043, 33768.711700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19900.562600, 32933.955000, 584.725617, 584.725617, 0.000000, X, Y) && !ellipse(19786.650020, 32097.529200, 401.841612, 401.841612, 0.000000, X, Y) && !ellipse(23392.817383, 30279.132355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20118.791901, 30017.147339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23729.648000, 29686.016000, 372.774411, 372.774411, 0.000000, X, Y) && !ellipse(28651.726837, 29804.240540, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 14 20:12:33 2012] Writing fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src3.gif
[Thu Jun 14 20:14:20 2012] Mean detx,y = (-10527.03, -8899.76) 
[Thu Jun 14 20:14:24 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 20:17:10 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 20:17:11 2012] Setting source spectrum file to fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jun 14 20:17:11 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Jun 14 20:57:18 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 14 20:57:18 2012] rmf not generated due to insufficient counts
[Thu Jun 14 23:50:43 2012] Updating aperture counts using extracted products
[Thu Jun 14 23:50:43 2012] Error reading totcts from fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jun 14 23:50:44 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 23:50:44 2012] Using photon index=1.80, rate=0.0384, arf fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src3.arf
[Thu Jun 14 23:50:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 23:50:44 2012] Updating source flux to 4.4e-13
[Thu Jun 14 23:53:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting