[Thu Jun 14 10:16:42 2012] Detection parameters:
  Position = (134.6, 411.1) = 0 56 1.56 -37 33 53.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 148.7 +/- 19.0
  Background counts = 29.8
  Rate = 0.004 +/- 0.0005

[Thu Jun 14 10:16:43 2012] Off-axis axis estimate = 14.41'
[Thu Jun 14 10:19:23 2012] Using EEF radius (= 13.64 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 10:19:23 2012] Initial guess for spatial extent in simple fitting = 13.64"
[Thu Jun 14 10:19:23 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.060
[Thu Jun 14 10:19:23 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 13.64"
[Thu Jun 14 13:30:26 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_src25.ximg exists
[Thu Jun 14 13:30:26 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_src25_1.ximg exists
[Thu Jun 14 13:30:26 2012] Fit fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_src25 appears to have run properly
[Thu Jun 14 13:30:27 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Thu Jun 14 13:30:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Thu Jun 14 13:30:27 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Thu Jun 14 13:30:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Thu Jun 14 13:30:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 15:23:38 2012] Warning, spatial fit 25 centroid is now closest to src. 30
[Thu Jun 14 15:23:38 2012] Spatial fit model total counts = 1772.330000, observed total counts = 1302.000000
[Thu Jun 14 15:23:38 2012] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 14 15:23:38 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 15:23:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 15:23:38 2012] Assessing source extent using major
[Thu Jun 14 15:23:38 2012] Source does appear to be extended
[Thu Jun 14 15:23:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 15:23:38 2012] Source is confused with source 21
[Thu Jun 14 15:23:38 2012] Source is confused with source 30
[Thu Jun 14 15:23:38 2012] Source is confused with source 32
[Thu Jun 14 15:24:07 2012] Using EEF radius (= 13.64 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 15:24:07 2012] Initial guess for spatial extent in simple fitting = 13.64"
[Thu Jun 14 15:24:07 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.060
[Thu Jun 14 15:24:07 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 13.64"
[Thu Jun 14 18:30:13 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src24.ximg exists
[Thu Jun 14 18:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src24.csv
[Thu Jun 14 18:30:13 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src24_1.ximg exists
[Thu Jun 14 18:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src24.csv
[Thu Jun 14 18:30:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 18:30:14 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Thu Jun 14 18:30:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Thu Jun 14 18:30:14 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Thu Jun 14 18:30:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Thu Jun 14 18:30:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 20:12:02 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 13.668502 pixels away
[Thu Jun 14 20:12:02 2012] Warning, spatial fit 24 centroid is now closest to src. 30
[Thu Jun 14 20:12:02 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 16.686483 pixels away
[Thu Jun 14 20:12:02 2012] Spatial fit model total counts = 1354.880000, observed total counts = 1181.000000
[Thu Jun 14 20:12:02 2012] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 14 20:12:02 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 20:12:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 20:12:02 2012] Assessing source extent using major
[Thu Jun 14 20:12:02 2012] Source does appear to be extended
[Thu Jun 14 20:12:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:12:33 2012] XMMSAS src. selection expression = ellipse(11663.313461, 35714.880035, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 14 20:12:33 2012] Writing source region out to fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src27_src.reg
[Thu Jun 14 20:12:33 2012] Extracting stamp from image fullrun_pn_xmm0112800101_pi300-10000_cl_sm2.00.img.gz, (97, 374) - (172, 449)
[Thu Jun 14 20:12:33 2012] XMMSAS bgd. selection expression = annulus(11663.313461, 35714.880035, 1087.500000, 2175.000000, X, Y) && !ellipse(11812.654000, 37340.808000, 1558.264045, 645.158419, 138.286000, X, Y) && !ellipse(13278.614000, 38869.066000, 2228.456064, 2228.456064, 0.000000, X, Y) && !ellipse(11998.153809, 38384.665985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12618.573090, 38045.207214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12776.712800, 37480.052000, 2193.920063, 2193.920063, 0.000000, X, Y) && !ellipse(11847.332000, 36825.282000, 2125.480061, 2125.480061, 0.000000, X, Y) && !ellipse(12463.520706, 36504.398132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12909.261627, 35993.148346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12325.423340, 35888.715424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11430.609436, 35113.489349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11400.760000, 36349.968000, 2128.664061, 2128.664061, 0.000000, X, Y) && !ellipse(11604.839096, 34535.736389, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 14 20:12:33 2012] Writing fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src27.gif
[Thu Jun 14 20:29:57 2012] Mean detx,y = (-17675.99, -3605.69) 
[Thu Jun 14 20:30:00 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 20:30:15 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 20:30:16 2012] Setting source spectrum file to fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Thu Jun 14 20:30:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Thu Jun 14 21:16:07 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 14 21:16:07 2012] rmf not generated due to insufficient counts
[Thu Jun 14 23:50:44 2012] Updating aperture counts using extracted products
[Thu Jun 14 23:50:44 2012] Error reading totcts from fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Thu Jun 14 23:50:45 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 23:50:45 2012] Using photon index=1.80, rate=0.00372, arf fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src27.arf
[Thu Jun 14 23:50:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 23:50:45 2012] Updating source flux to 3.4e-14
[Thu Jun 14 23:53:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting