[Thu Jun 14 10:16:42 2012] Detection parameters:
  Position = (275.9, 296.1) = 0 55 9.90 -37 42 11.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7502.8 +/- 101.1
  Background counts = 32.6
  Rate = 0.3 +/- 0.004

[Thu Jun 14 10:16:43 2012] Off-axis axis estimate = 1.64'
[Thu Jun 14 10:19:23 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 10:19:23 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Thu Jun 14 10:19:23 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Thu Jun 14 10:19:23 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Thu Jun 14 13:30:25 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 14 13:30:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_src1.csv
[Thu Jun 14 13:30:25 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 14 13:30:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_src1.csv
[Thu Jun 14 13:30:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 13:30:27 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 14 13:30:27 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 14 13:30:27 2012] Fit fullrun_pn_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun 14 15:23:38 2012] Spatial fit model total counts = 7549.370000, observed total counts = 6943.000000
[Thu Jun 14 15:23:38 2012] Offset between fit and detection position for source 1 = 0.200443 pixels
[Thu Jun 14 15:23:38 2012] 7562.070000 total counts/ 1955.510000 bgd. counts: snr = 126.784585
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.200443 pixels
  Position = (275.9, 296.3) = 0 55 9.90 -37 42 12.6
  Extent = 5.5 (5.4-5.7)", rotation angle = 0
  Source counts = 5606.6 +/- 87.0
  Background counts = 1955.5
  Rate = 0.1 +/- 0.002
[Thu Jun 14 15:23:38 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 15:23:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 15:23:38 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 15:23:38 2012] Source does appear to be extended
[Thu Jun 14 15:23:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 15:24:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 14 15:24:07 2012] Initial guess for spatial extent in simple fitting = 5.50"
[Thu Jun 14 15:24:07 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.965
[Thu Jun 14 15:24:07 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.50"
[Thu Jun 14 18:30:12 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 14 18:30:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src1.csv
[Thu Jun 14 18:30:12 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 14 18:30:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src1.csv
[Thu Jun 14 18:30:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 18:30:13 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 14 18:30:13 2012] fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 14 18:30:13 2012] Fit fullrun_pn_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun 14 20:12:02 2012] Spatial fit model total counts = 7418.840000, observed total counts = 6942.000000
[Thu Jun 14 20:12:02 2012] Offset between fit and detection position for source 1 = 0.005733 pixels
[Thu Jun 14 20:12:02 2012] 7455.910000 total counts/ 1850.340000 bgd. counts: snr = 130.314881
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.005733 pixels
  Position = (275.9, 296.3) = 0 55 9.90 -37 42 12.6
  Extent = 5.5 (5.4-5.6)", rotation angle = 0
  Source counts = 5605.6 +/- 86.3
  Background counts = 1850.3
  Rate = 0.1 +/- 0.002
[Thu Jun 14 20:12:02 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 20:12:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 20:12:02 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 20:12:02 2012] Source does appear to be extended
[Thu Jun 14 20:12:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:12:33 2012] Counts = 5605.570000, rescaling region sizes by 2.000000
[Thu Jun 14 20:12:33 2012] XMMSAS src. selection expression = ellipse(23952.244200, 25729.248600, 659.031619, 659.031619, 0.000000, X, Y)
[Thu Jun 14 20:12:33 2012] Writing source region out to fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 14 20:12:33 2012] Extracting stamp from image fullrun_pn_xmm0112800101_pi300-10000_cl_sm2.00.img.gz, (238, 258) - (314, 334)
[Thu Jun 14 20:12:33 2012] XMMSAS bgd. selection expression = annulus(23952.244200, 25729.248600, 2196.772063, 4393.544126, X, Y) && !ellipse(23392.817383, 30279.132355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20118.791901, 30017.147339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23729.648000, 29686.016000, 372.774411, 372.774411, 0.000000, X, Y) && !ellipse(28651.726837, 29804.240540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28785.165955, 28359.758575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27914.830400, 26626.190000, 517.656015, 517.656015, 0.000000, X, Y) && !ellipse(28553.688600, 26642.344140, 444.000013, 444.000013, 0.000000, X, Y) && !ellipse(27908.754600, 24584.750200, 457.094413, 457.094413, 0.000000, X, Y) && !ellipse(26982.561600, 24555.261780, 361.466410, 361.466410, 0.000000, X, Y) && !ellipse(24528.328278, 23183.322296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22644.468170, 22619.303802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28571.438751, 21167.410324, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 14 20:12:33 2012] Writing fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src1.gif
[Thu Jun 14 20:12:42 2012] Mean detx,y = (-2865.02, 2238.29) 
[Thu Jun 14 20:12:44 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 20:13:06 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 20:13:06 2012] Setting source spectrum file to fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 14 20:13:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 14 23:50:43 2012] Updating aperture counts using extracted products
[Thu Jun 14 23:50:43 2012] Error reading totcts from fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 14 23:50:44 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 23:50:44 2012] Using photon index=1.80, rate=0.14, arf fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src1.arf
[Thu Jun 14 23:50:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 23:50:44 2012] Updating source flux to 4.7e-13
[Thu Jun 14 23:54:35 2012] Reading fit data from xmm0112800101/analysis//spectral/fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jun 14 23:54:35 2012] Spectral fit parameter nH value = 1.1379e+21
[Thu Jun 14 23:54:35 2012] Spectral fit parameter PhoIndex value = 2.80292
[Thu Jun 14 23:54:35 2012] Failed to get F(0.3-8.0) from xmm0112800101/analysis//spectral/fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jun 14 23:54:35 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 23:54:35 2012] Using Nh = 1.1e+21, photon index=2.80, rate=0.14, arf fullrun_pn_xmm0112800101_pi300-10000_pass1_cl_src1.arf
[Thu Jun 14 23:54:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 23:54:35 2012] Updating source flux to 3.5e-13