[Thu Jun 14 10:17:46 2012] Detection parameters:
  Position = (253.4, 419.2) = 0 55 18.09 -37 33 15.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.3 +/- 8.7
  Background counts = 7.6
  Rate = 0.0008 +/- 0.0002

[Thu Jun 14 10:17:46 2012] Off-axis axis estimate = 9.34'
[Thu Jun 14 14:26:30 2012] Using EEF radius (= 11.10 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 14:26:30 2012] Initial guess for spatial extent in simple fitting = 11.10"
[Thu Jun 14 14:26:30 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.967
[Thu Jun 14 14:26:30 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 11.10"
[Thu Jun 14 15:23:24 2012] fullrun_mos2_xmm0112800101_pi300-10000_cl_pass0_src48.ximg exists
[Thu Jun 14 15:23:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112800101_pi300-10000_cl_pass0_src48.csv
[Thu Jun 14 15:23:24 2012] fullrun_mos2_xmm0112800101_pi300-10000_cl_pass0_src48_1.ximg exists
[Thu Jun 14 15:23:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112800101_pi300-10000_cl_pass0_src48.csv
[Thu Jun 14 15:23:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112800101_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112800101_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 15:23:24 2012] fullrun_mos2_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Thu Jun 14 15:23:24 2012] fullrun_mos2_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Thu Jun 14 15:23:24 2012] Fit fullrun_mos2_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Thu Jun 14 15:23:51 2012] Spatial fit model total counts = 122.520000, observed total counts = 116.000000
[Thu Jun 14 15:23:51 2012] Offset between fit and detection position for source 11 = 0.849270 pixels
[Thu Jun 14 15:23:51 2012] 124.453100 total counts/ 100.271000 bgd. counts: snr = 2.414940
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.849270 pixels
  Position = (252.7, 418.7) = 0 55 18.36 -37 33 20.0
  Extent = 7.0 (2.8-11.3)", rotation angle = 0
  Source counts = 24.2 +/- 11.2
  Background counts = 100.3
  Rate = 0.0006 +/- 0.0003
[Thu Jun 14 15:23:51 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 15:23:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 15:23:51 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 15:23:51 2012] Source does appear to be extended
[Thu Jun 14 15:23:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 19:23:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 14 19:23:12 2012] Initial guess for spatial extent in simple fitting = 7.04"
[Thu Jun 14 19:23:12 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.892
[Thu Jun 14 19:23:12 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 7.04"
[Thu Jun 14 20:11:46 2012] fullrun_mos2_xmm0112800101_pi300-10000_cl_pass1_src44.ximg exists
[Thu Jun 14 20:11:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112800101_pi300-10000_cl_pass1_src44.csv
[Thu Jun 14 20:11:46 2012] fullrun_mos2_xmm0112800101_pi300-10000_cl_pass1_src44_1.ximg exists
[Thu Jun 14 20:11:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112800101_pi300-10000_cl_pass1_src44.csv
[Thu Jun 14 20:11:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112800101_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112800101_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 20:11:46 2012] fullrun_mos2_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Thu Jun 14 20:11:46 2012] fullrun_mos2_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Thu Jun 14 20:11:46 2012] Fit fullrun_mos2_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly
[Thu Jun 14 20:12:18 2012] Spatial fit model total counts = 121.283000, observed total counts = 110.000000
[Thu Jun 14 20:12:18 2012] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 14 20:12:18 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 20:12:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 20:12:18 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 20:12:18 2012] Source does appear to be extended
[Thu Jun 14 20:12:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 23:15:27 2012] XMMSAS src. selection expression = ellipse(21937.464000, 36380.805200, 422.332812, 422.332812, 0.000000, X, Y)
[Thu Jun 14 23:15:27 2012] Writing source region out to fullrun_mos2_xmm0112800101_pi300-10000_pass1_cl_src11_src.reg
[Thu Jun 14 23:15:27 2012] Extracting stamp from image fullrun_mos2_xmm0112800101_pi300-10000_cl_sm2.00.img.gz, (228, 394) - (277, 443)
[Thu Jun 14 23:15:27 2012] XMMSAS bgd. selection expression = annulus(21937.464000, 36380.805200, 703.888020, 1407.776041, X, Y)
[Thu Jun 14 23:15:27 2012] Writing fullrun_mos2_xmm0112800101_pi300-10000_pass1_cl_src11.gif
[Thu Jun 14 23:23:28 2012] Mean detx,y = (8241.82, 7086.24) 
[Thu Jun 14 23:23:29 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 23:23:42 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 23:23:43 2012] Setting source spectrum file to fullrun_mos2_xmm0112800101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Jun 14 23:23:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112800101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Jun 14 23:50:01 2012] Not generating rmf since there are only 24 counts
[Thu Jun 14 23:50:01 2012] rmf not generated due to insufficient counts
[Thu Jun 14 23:50:46 2012] Updating aperture counts using extracted products
[Thu Jun 14 23:50:46 2012] Error reading totcts from fullrun_mos2_xmm0112800101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Jun 14 23:50:47 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 23:50:47 2012] Using photon index=1.80, rate=0.000552, arf fullrun_mos2_xmm0112800101_pi300-10000_pass1_cl_src11.arf
[Thu Jun 14 23:50:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 23:50:47 2012] Updating source flux to 1.5e-14
[Thu Jun 14 23:52:12 2012] Flag p found in src. 11 procflags, skipping spectral fitting
[Thu Jun 14 23:52:12 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting