[Thu Jun 14 10:17:12 2012] Detection parameters:
  Position = (374.4, 261.3) = 0 54 33.78 -37 44 45.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.3 +/- 12.8
  Background counts = 11.0
  Rate = 0.003 +/- 0.0004

[Thu Jun 14 10:17:12 2012] Off-axis axis estimate = 6.13'
[Thu Jun 14 13:30:28 2012] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 13:30:28 2012] Initial guess for spatial extent in simple fitting = 9.49"
[Thu Jun 14 13:30:28 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.869
[Thu Jun 14 13:30:28 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 9.49"
[Thu Jun 14 14:26:29 2012] fullrun_mos1_xmm0112800101_pi300-10000_cl_pass0_src16.ximg exists
[Thu Jun 14 14:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112800101_pi300-10000_cl_pass0_src16.csv
[Thu Jun 14 14:26:29 2012] fullrun_mos1_xmm0112800101_pi300-10000_cl_pass0_src16_1.ximg exists
[Thu Jun 14 14:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112800101_pi300-10000_cl_pass0_src16.csv
[Thu Jun 14 14:26:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112800101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112800101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 14:26:30 2012] fullrun_mos1_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Thu Jun 14 14:26:30 2012] fullrun_mos1_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Thu Jun 14 14:26:30 2012] Fit fullrun_mos1_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Thu Jun 14 15:23:44 2012] Spatial fit model total counts = 218.283000, observed total counts = 210.000000
[Thu Jun 14 15:23:44 2012] Offset between fit and detection position for source 28 = 1.226136 pixels
[Thu Jun 14 15:23:44 2012] 218.940000 total counts/ 110.281000 bgd. counts: snr = 10.347022
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 1.226136 pixels
  Position = (374.4, 262.5) = 0 54 33.76 -37 44 39.3
  Extent = 8.7 (6.6-11.0)", rotation angle = 0
  Source counts = 108.7 +/- 14.8
  Background counts = 110.3
  Rate = 0.002 +/- 0.0003
[Thu Jun 14 15:23:44 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 15:23:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 15:23:44 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 15:23:44 2012] Source does appear to be extended
[Thu Jun 14 15:23:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 18:30:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 14 18:30:14 2012] Initial guess for spatial extent in simple fitting = 8.70"
[Thu Jun 14 18:30:14 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.001
[Thu Jun 14 18:30:14 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 8.70"
[Thu Jun 14 19:23:11 2012] fullrun_mos1_xmm0112800101_pi300-10000_cl_pass1_src16.ximg exists
[Thu Jun 14 19:23:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112800101_pi300-10000_cl_pass1_src16.csv
[Thu Jun 14 19:23:11 2012] fullrun_mos1_xmm0112800101_pi300-10000_cl_pass1_src16_1.ximg exists
[Thu Jun 14 19:23:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112800101_pi300-10000_cl_pass1_src16.csv
[Thu Jun 14 19:23:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112800101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112800101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 19:23:12 2012] fullrun_mos1_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Thu Jun 14 19:23:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Thu Jun 14 19:23:12 2012] fullrun_mos1_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Thu Jun 14 19:23:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Thu Jun 14 19:23:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 20:12:10 2012] Warning, spatial fit 16 centroid is now closest to src. 40
[Thu Jun 14 20:12:10 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 20:12:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 20:12:10 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 20:12:10 2012] Source does appear to be extended
[Thu Jun 14 20:12:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 22:21:06 2012] XMMSAS src. selection expression = ellipse(32527.413800, 22791.639000, 521.727015, 521.727015, 0.000000, X, Y)
[Thu Jun 14 22:21:06 2012] Writing source region out to fullrun_mos1_xmm0112800101_pi300-10000_pass1_cl_src28_src.reg
[Thu Jun 14 22:21:06 2012] Extracting stamp from image fullrun_mos1_xmm0112800101_pi300-10000_cl_sm2.00.img.gz, (344, 233) - (404, 293)
[Thu Jun 14 22:21:06 2012] XMMSAS bgd. selection expression = annulus(32527.413800, 22791.639000, 869.545025, 1739.090050, X, Y) && !ellipse(30490.531320, 23907.137400, 464.290413, 464.290413, 0.000000, X, Y) && !ellipse(33321.384399, 24479.231476, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 14 22:21:06 2012] Writing fullrun_mos1_xmm0112800101_pi300-10000_pass1_cl_src28.gif
[Thu Jun 14 22:23:53 2012] Mean detx,y = (-2343.35, 5863.64) 
[Thu Jun 14 22:23:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 22:24:00 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 22:24:00 2012] Setting source spectrum file to fullrun_mos1_xmm0112800101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Thu Jun 14 22:24:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112800101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Thu Jun 14 23:50:45 2012] Updating aperture counts using extracted products
[Thu Jun 14 23:50:45 2012] Error reading totcts from fullrun_mos1_xmm0112800101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Thu Jun 14 23:50:46 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 23:50:46 2012] Using photon index=1.80, rate=0.00248, arf fullrun_mos1_xmm0112800101_pi300-10000_pass1_cl_src28.arf
[Thu Jun 14 23:50:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 23:50:46 2012] Updating source flux to 3.3e-14