[Thu Jun 14 10:17:12 2012] Detection parameters:
  Position = (228.1, 369.3) = 0 55 27.37 -37 36 53.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.9 +/- 13.8
  Background counts = 10.2
  Rate = 0.005 +/- 0.0006

[Thu Jun 14 10:17:12 2012] Off-axis axis estimate = 7.24'
[Thu Jun 14 13:30:28 2012] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 13:30:28 2012] Initial guess for spatial extent in simple fitting = 10.05"
[Thu Jun 14 13:30:28 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.950
[Thu Jun 14 13:30:28 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.05"
[Thu Jun 14 14:26:29 2012] fullrun_mos1_xmm0112800101_pi300-10000_cl_pass0_src11.ximg exists
[Thu Jun 14 14:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112800101_pi300-10000_cl_pass0_src11.csv
[Thu Jun 14 14:26:29 2012] fullrun_mos1_xmm0112800101_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Jun 14 14:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112800101_pi300-10000_cl_pass0_src11.csv
[Thu Jun 14 14:26:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112800101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112800101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 14:26:30 2012] fullrun_mos1_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Jun 14 14:26:30 2012] fullrun_mos1_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Jun 14 14:26:30 2012] Fit fullrun_mos1_xmm0112800101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Jun 14 15:23:44 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 12.674718 pixels away
[Thu Jun 14 15:23:44 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 15:23:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 15:23:44 2012] Assessing source extent using major
[Thu Jun 14 15:23:44 2012] Source does appear to be extended
[Thu Jun 14 15:23:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 18:30:14 2012] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 18:30:14 2012] Initial guess for spatial extent in simple fitting = 10.05"
[Thu Jun 14 18:30:14 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.950
[Thu Jun 14 18:30:14 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 10.05"
[Thu Jun 14 19:23:11 2012] fullrun_mos1_xmm0112800101_pi300-10000_cl_pass1_src11.ximg exists
[Thu Jun 14 19:23:11 2012] fullrun_mos1_xmm0112800101_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Jun 14 19:23:11 2012] Fit fullrun_mos1_xmm0112800101_pi300-10000_cl_pass1_src11 appears to have run properly
[Thu Jun 14 19:23:11 2012] fullrun_mos1_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Jun 14 19:23:11 2012] fullrun_mos1_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Jun 14 19:23:11 2012] Fit fullrun_mos1_xmm0112800101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Jun 14 20:12:10 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 13.639976 pixels away
[Thu Jun 14 20:12:10 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 20:12:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 20:12:10 2012] Assessing source extent using major
[Thu Jun 14 20:12:10 2012] Source does appear to be extended
[Thu Jun 14 20:12:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 22:21:06 2012] XMMSAS src. selection expression = ellipse(19797.528046, 32081.706085, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 14 22:21:06 2012] Writing source region out to fullrun_mos1_xmm0112800101_pi300-10000_pass1_cl_src11_src.reg
[Thu Jun 14 22:21:06 2012] Extracting stamp from image fullrun_mos1_xmm0112800101_pi300-10000_cl_sm2.00.img.gz, (191, 332) - (266, 407)
[Thu Jun 14 22:21:06 2012] XMMSAS bgd. selection expression = annulus(19797.528046, 32081.706085, 1087.500000, 2175.000000, X, Y) && !ellipse(20124.728380, 30007.683800, 366.287211, 366.287211, 0.000000, X, Y)
[Thu Jun 14 22:21:06 2012] Writing fullrun_mos1_xmm0112800101_pi300-10000_pass1_cl_src11.gif
[Thu Jun 14 22:22:57 2012] Mean detx,y = (2574.10, -9089.82) 
[Thu Jun 14 22:22:58 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 22:23:05 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 22:23:05 2012] Setting source spectrum file to fullrun_mos1_xmm0112800101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Jun 14 22:23:05 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112800101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Jun 14 22:55:21 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 14 22:55:21 2012] rmf not generated due to insufficient counts
[Thu Jun 14 23:50:45 2012] Updating aperture counts using extracted products
[Thu Jun 14 23:50:45 2012] Error reading totcts from fullrun_mos1_xmm0112800101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Jun 14 23:50:46 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 23:50:46 2012] Using photon index=1.80, rate=0.00481, arf fullrun_mos1_xmm0112800101_pi300-10000_pass1_cl_src11.arf
[Thu Jun 14 23:50:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 23:50:46 2012] Updating source flux to 8.6e-14
[Thu Jun 14 23:50:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting