[Sat Feb 11 10:05:13 2012] Detection parameters:
  Position = (302.8, 270.0) = 1 46 30.69 61 42 4.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 171.4 +/- 19.9
  Background counts = 49.9
  Rate = 0.05 +/- 0.005

[Sat Feb 11 10:05:13 2012] Off-axis axis estimate = 2.09'
[Sat Feb 11 10:07:30 2012] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 10:07:30 2012] Initial guess for spatial extent in simple fitting = 7.47"
[Sat Feb 11 10:07:30 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.813
[Sat Feb 11 10:07:30 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.47"
[Sat Feb 11 12:04:18 2012] fullrun_pn_xmm0112781101_pi300-10000_cl_pass0_src5.ximg exists
[Sat Feb 11 12:04:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112781101_pi300-10000_cl_pass0_src5.csv
[Sat Feb 11 12:04:18 2012] fullrun_pn_xmm0112781101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Feb 11 12:04:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112781101_pi300-10000_cl_pass0_src5.csv
[Sat Feb 11 12:04:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112781101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112781101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 12:04:18 2012] fullrun_pn_xmm0112781101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Feb 11 12:04:18 2012] fullrun_pn_xmm0112781101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Feb 11 12:04:18 2012] Fit fullrun_pn_xmm0112781101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Feb 11 12:09:07 2012] Spatial fit model total counts = 882.798000, observed total counts = 896.000000
[Sat Feb 11 12:09:07 2012] Offset between fit and detection position for source 5 = 1.688810 pixels
[Sat Feb 11 12:09:07 2012] 950.091000 total counts/ 751.124000 bgd. counts: snr = 7.259810
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.688810 pixels
  Position = (302.5, 268.4) = 1 46 30.93 61 41 56.6
  Extent = 8.0 (7.0-9.7)", rotation angle = 0
  Source counts = 199.0 +/- 30.8
  Background counts = 751.1
  Rate = 0.03 +/- 0.005
[Sat Feb 11 12:09:07 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 12:09:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 12:09:07 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 12:09:07 2012] Source does appear to be extended
[Sat Feb 11 12:09:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 12:09:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 11 12:09:12 2012] Initial guess for spatial extent in simple fitting = 8.04"
[Sat Feb 11 12:09:12 2012] source mask rpix=1.8, npix_max = 22, mask sum = 25, frac = 1.132
[Sat Feb 11 12:09:12 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 8.04"
[Sat Feb 11 12:26:06 2012] fullrun_pn_xmm0112781101_pi300-10000_cl_pass1_src5.ximg exists
[Sat Feb 11 12:26:06 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112781101_pi300-10000_cl_pass1_src5.csv
[Sat Feb 11 12:26:06 2012] fullrun_pn_xmm0112781101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Feb 11 12:26:06 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112781101_pi300-10000_cl_pass1_src5.csv
[Sat Feb 11 12:26:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112781101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112781101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 12:26:06 2012] fullrun_pn_xmm0112781101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Feb 11 12:26:06 2012] fullrun_pn_xmm0112781101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Feb 11 12:26:06 2012] Fit fullrun_pn_xmm0112781101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Feb 11 12:30:32 2012] Warning, spatial fit 5 centroid is now closest to src. 3
[Sat Feb 11 12:30:32 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 12:30:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 12:30:32 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 12:30:32 2012] Source does appear to be extended
[Sat Feb 11 12:30:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 12:30:36 2012] XMMSAS src. selection expression = ellipse(26265.841200, 23299.062000, 482.694614, 482.694614, 0.000000, X, Y)
[Sat Feb 11 12:30:36 2012] Writing source region out to fullrun_pn_xmm0112781101_pi300-10000_pass1_cl_src5_src.reg
[Sat Feb 11 12:30:36 2012] Extracting stamp from image fullrun_pn_xmm0112781101_pi300-10000_cl_sm2.00.img.gz, (275, 241) - (330, 296)
[Sat Feb 11 12:30:36 2012] XMMSAS bgd. selection expression = annulus(26265.841200, 23299.062000, 804.491023, 1608.982046, X, Y) && !ellipse(26459.224000, 23960.186000, 545.036816, 545.036816, 0.000000, X, Y) && !ellipse(26837.651520, 25011.973724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26662.866000, 24448.716000, 657.682419, 657.682419, 0.000000, X, Y)
[Sat Feb 11 12:30:36 2012] Writing fullrun_pn_xmm0112781101_pi300-10000_pass1_cl_src5.gif
[Sat Feb 11 12:37:23 2012] Mean detx,y = (90.05, 3769.49) 
[Sat Feb 11 12:37:25 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 11 12:37:32 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 11 12:37:33 2012] Setting source spectrum file to fullrun_pn_xmm0112781101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Feb 11 12:37:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112781101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Feb 11 12:57:35 2012] Updating aperture counts using extracted products
[Sat Feb 11 12:57:35 2012] Error reading totcts from fullrun_pn_xmm0112781101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Feb 11 12:57:35 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 11 12:57:35 2012] Using photon index=1.80, rate=0.0332, arf fullrun_pn_xmm0112781101_pi300-10000_pass1_cl_src5.arf
[Sat Feb 11 12:57:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 11 12:57:35 2012] Updating source flux to 1e-13