[Thu Dec 22 06:29:43 2011] Detection parameters: Position = (168.4, 168.2) = 12 29 42.61 1 55 24.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 70.7 +/- 10.5 Background counts = 1.9 Rate = 0.01 +/- 0.002 [Thu Dec 22 06:29:43 2011] Off-axis axis estimate = 13.35' [Thu Dec 22 06:53:10 2011] Using EEF radius (= 13.10 ")to estimate initial spatial extent for simple fitting [Thu Dec 22 06:53:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu Dec 22 06:53:10 2011] Initial guess for spatial extent in simple fitting = 13.10" [Thu Dec 22 06:53:10 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.993 [Thu Dec 22 06:53:10 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 13.10" [Thu Dec 22 07:28:59 2011] fullrun_mos2_xmm0112770201_pi300-10000_cl_pass0_src4.ximg exists [Thu Dec 22 07:28:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112770201_pi300-10000_cl_pass0_src4.csv [Thu Dec 22 07:28:59 2011] fullrun_mos2_xmm0112770201_pi300-10000_cl_pass0_src4_1.ximg exists [Thu Dec 22 07:28:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112770201_pi300-10000_cl_pass0_src4.csv [Thu Dec 22 07:28:59 2011] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112770201_pi300-10000_cl_pass0_src4_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112770201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Dec 22 07:28:59 2011] fullrun_mos2_xmm0112770201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists [Thu Dec 22 07:28:59 2011] fullrun_mos2_xmm0112770201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists [Thu Dec 22 07:28:59 2011] Fit fullrun_mos2_xmm0112770201_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly [Thu Dec 22 07:29:06 2011] Spatial fit model total counts = 80.998800, observed total counts = 81.000000 [Thu Dec 22 07:29:06 2011] Offset between fit and detection position for source 4 = 0.412552 pixels [Thu Dec 22 07:29:06 2011] 82.031700 total counts/ 27.664400 bgd. counts: snr = 10.336586 Spatial fit parameters: Offset between fit and detection position for source 4 = 0.412552 pixels Position = (168.3, 168.6) = 12 29 42.64 1 55 25.6 Extent = 7.0 (5.2-8.7)", rotation angle = 0 Source counts = 54.4 +/- 9.1 Background counts = 27.7 Rate = 0.009 +/- 0.002 [Thu Dec 22 07:29:06 2011] Vigneting correction estimate = 1.000000 [Thu Dec 22 07:29:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Dec 22 07:29:06 2011] Assessing source extent using major axis lower bound [Thu Dec 22 07:29:06 2011] Source does appear to be extended [Thu Dec 22 07:29:06 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Dec 22 07:29:06 2011] Deleting source due to low Poisson probability 0.9