[Thu Dec 22 06:29:43 2011] Detection parameters: Position = (213.7, 114.5) = 12 29 29.47 1 51 29.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 25.7 +/- 7.0 Background counts = 2.6 Rate = 0.004 +/- 0.001 [Thu Dec 22 06:29:43 2011] Off-axis axis estimate = 14.68' [Thu Dec 22 06:53:10 2011] Using EEF radius (= 13.77 ")to estimate initial spatial extent for simple fitting [Thu Dec 22 06:53:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu Dec 22 06:53:10 2011] Initial guess for spatial extent in simple fitting = 13.77" [Thu Dec 22 06:53:10 2011] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.912 [Thu Dec 22 06:53:10 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 13.77" [Thu Dec 22 07:28:59 2011] fullrun_mos2_xmm0112770201_pi300-10000_cl_pass0_src6.ximg exists [Thu Dec 22 07:28:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112770201_pi300-10000_cl_pass0_src6.csv [Thu Dec 22 07:28:59 2011] fullrun_mos2_xmm0112770201_pi300-10000_cl_pass0_src6_1.ximg exists [Thu Dec 22 07:28:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112770201_pi300-10000_cl_pass0_src6.csv [Thu Dec 22 07:28:59 2011] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112770201_pi300-10000_cl_pass0_src6_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112770201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Dec 22 07:28:59 2011] fullrun_mos2_xmm0112770201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists [Thu Dec 22 07:28:59 2011] fullrun_mos2_xmm0112770201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists [Thu Dec 22 07:28:59 2011] Fit fullrun_mos2_xmm0112770201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly [Thu Dec 22 07:29:06 2011] Spatial fit model total counts = 50.999500, observed total counts = 51.000000 [Thu Dec 22 07:29:06 2011] Offset between fit and detection position for source 1 = 0.460424 pixels [Thu Dec 22 07:29:06 2011] 51.058500 total counts/ 26.398500 bgd. counts: snr = 4.799582 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.460424 pixels Position = (213.4, 114.9) = 12 29 29.53 1 51 32.3 Extent = 8.6 (5.6-11.7)", rotation angle = 0 Source counts = 24.7 +/- 7.1 Background counts = 26.4 Rate = 0.004 +/- 0.001 [Thu Dec 22 07:29:06 2011] Vigneting correction estimate = 1.000000 [Thu Dec 22 07:29:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Dec 22 07:29:06 2011] Assessing source extent using major axis lower bound [Thu Dec 22 07:29:06 2011] Source does appear to be extended [Thu Dec 22 07:29:06 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Dec 22 07:29:06 2011] Deleting source due to low Poisson probability 0.7