[Sun Jun 24 14:40:46 2012] Detection parameters:
  Position = (301.2, 314.1) = 8 35 39.22 -42 32 50.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 201.8 +/- 27.0
  Background counts = 224.9
  Rate = 0.01 +/- 0.001

[Sun Jun 24 14:40:46 2012] Off-axis axis estimate = 1.16'
[Sun Jun 24 14:44:07 2012] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 14:44:07 2012] Initial guess for spatial extent in simple fitting = 7.01"
[Sun Jun 24 14:44:07 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.898
[Sun Jun 24 14:44:07 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 7.01"
[Sun Jun 24 15:28:49 2012] fullrun_pn_xmm0112690101_pi300-10000_cl_pass0_src8.ximg exists
[Sun Jun 24 15:28:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112690101_pi300-10000_cl_pass0_src8.csv
[Sun Jun 24 15:28:49 2012] fullrun_pn_xmm0112690101_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun Jun 24 15:28:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112690101_pi300-10000_cl_pass0_src8.csv
[Sun Jun 24 15:28:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112690101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112690101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 15:28:49 2012] fullrun_pn_xmm0112690101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun Jun 24 15:28:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112690101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun Jun 24 15:28:49 2012] fullrun_pn_xmm0112690101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Jun 24 15:28:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112690101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun Jun 24 15:28:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112690101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112690101_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 15:52:51 2012] Spatial fit model total counts = 1679.140000, observed total counts = 1678.000000
[Sun Jun 24 15:52:51 2012] Offset between fit and detection position for source 11 = 0.523454 pixels
[Sun Jun 24 15:52:51 2012] Warning, changing simple spatial fit ID from 8 to 7
[Sun Jun 24 15:52:51 2012] 1683.625600 total counts/ 1638.280000 bgd. counts: snr = 1.120317
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.523454 pixels
  Position = (300.7, 314.0) = 8 35 39.41 -42 32 53.2
  Extent = 5.1 (1.7-7.3)", rotation angle = 0
  Source counts = 45.3 +/- 41.0
  Background counts = 1638.3
  Rate = 0.003 +/- 0.003
  Deleting source due to low Poisson probability