[Tue May 22 02:00:48 2012] Detection parameters:
  Position = (279.1, 222.0) = 2 26 40.06 -4 34 33.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.3 +/- 16.6
  Background counts = 58.3
  Rate = 0.007 +/- 0.0009

[Tue May 22 02:00:48 2012] Off-axis axis estimate = 5.72'
[Tue May 22 02:04:48 2012] Using EEF radius (= 9.29 ")to estimate initial spatial extent for simple fitting
[Tue May 22 02:04:48 2012] Initial guess for spatial extent in simple fitting = 9.29"
[Tue May 22 02:04:48 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.296
[Tue May 22 02:04:48 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 9.29"
[Tue May 22 02:40:12 2012] fullrun_pn_xmm0112681301_pi300-10000_cl_pass0_src23.ximg exists
[Tue May 22 02:40:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112681301_pi300-10000_cl_pass0_src23.csv
[Tue May 22 02:40:12 2012] fullrun_pn_xmm0112681301_pi300-10000_cl_pass0_src23_1.ximg exists
[Tue May 22 02:40:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112681301_pi300-10000_cl_pass0_src23.csv
[Tue May 22 02:40:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112681301_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112681301_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 02:40:12 2012] fullrun_pn_xmm0112681301_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Tue May 22 02:40:12 2012] fullrun_pn_xmm0112681301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Tue May 22 02:40:12 2012] Fit fullrun_pn_xmm0112681301_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Tue May 22 03:06:06 2012] Source 24 is offset by -7.948118 and -5.895826 pixels which is larger than
2 X fitted extent = 1.067646 x 1.067646, not incorporating fit results
[Tue May 22 03:06:06 2012] Vigneting correction estimate = 1.000000
[Tue May 22 03:06:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 03:06:06 2012] Assessing source extent using major
[Tue May 22 03:06:06 2012] Source does appear to be extended
[Tue May 22 03:06:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 03:06:19 2012] Using EEF radius (= 9.29 ")to estimate initial spatial extent for simple fitting
[Tue May 22 03:06:19 2012] Initial guess for spatial extent in simple fitting = 9.29"
[Tue May 22 03:06:19 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.296
[Tue May 22 03:06:19 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 9.29"
[Tue May 22 03:37:52 2012] fullrun_pn_xmm0112681301_pi300-10000_cl_pass1_src22.ximg exists
[Tue May 22 03:37:52 2012] fullrun_pn_xmm0112681301_pi300-10000_cl_pass1_src22_1.ximg exists
[Tue May 22 03:37:52 2012] Fit fullrun_pn_xmm0112681301_pi300-10000_cl_pass1_src22 appears to have run properly
[Tue May 22 03:37:53 2012] fullrun_pn_xmm0112681301_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Tue May 22 03:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112681301_pi300-10000_cl_pass1_tfrozen_src22.csv
[Tue May 22 03:37:53 2012] fullrun_pn_xmm0112681301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Tue May 22 03:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112681301_pi300-10000_cl_pass1_tfrozen_src22.csv
[Tue May 22 03:37:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112681301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112681301_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 04:02:32 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 10.746666 pixels away
[Tue May 22 04:02:32 2012] Spatial fit model total counts = 247.529000, observed total counts = 246.000000
[Tue May 22 04:02:32 2012] Offset between fit and detection position for source 24 = 0.376010 pixels
[Tue May 22 04:02:32 2012] 244.752800 total counts/ 207.577000 bgd. counts: snr = 2.580303
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.376010 pixels
  Position = (279.2, 222.3) = 2 26 40.01 -4 34 32.1
  Extent = 2.9" x 2.9", rotation angle = 0
  Source counts = 37.2 +/- 15.6
  Background counts = 207.6
  Rate = 0.003 +/- 0.001
[Tue May 22 04:02:32 2012] Vigneting correction estimate = 1.000000
[Tue May 22 04:02:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 04:02:32 2012] Assessing source extent using major
[Tue May 22 04:02:32 2012] Source does appear to be extended
[Tue May 22 04:02:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 04:02:49 2012] XMMSAS src. selection expression = ellipse(24244.008360, 19291.194200, 172.225205, 172.225205, 0.000000, X, Y)
[Tue May 22 04:02:49 2012] Writing source region out to fullrun_pn_xmm0112681301_pi300-10000_pass1_cl_src24_src.reg
[Tue May 22 04:02:49 2012] Extracting stamp from image fullrun_pn_xmm0112681301_pi300-10000_cl_sm2.00.img.gz, (269, 212) - (289, 232)
[Tue May 22 04:02:49 2012] XMMSAS bgd. selection expression = annulus(24244.008360, 19291.194200, 287.042008, 574.084017, X, Y)
[Tue May 22 04:02:49 2012] Writing fullrun_pn_xmm0112681301_pi300-10000_pass1_cl_src24.gif
[Tue May 22 04:17:40 2012] Mean detx,y = (-1675.03, -5344.22) 
[Tue May 22 04:17:42 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 04:17:55 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 04:17:56 2012] Setting source spectrum file to fullrun_pn_xmm0112681301_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Tue May 22 04:17:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112681301_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Tue May 22 04:28:28 2012] Not generating rmf since there are only 37 counts
[Tue May 22 04:28:28 2012] rmf not generated due to insufficient counts
[Tue May 22 04:51:33 2012] Updating aperture counts using extracted products
[Tue May 22 04:51:33 2012] Error reading totcts from fullrun_pn_xmm0112681301_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Tue May 22 04:51:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 04:51:34 2012] Using photon index=1.80, rate=0.00257, arf fullrun_pn_xmm0112681301_pi300-10000_pass1_cl_src24.arf
[Tue May 22 04:51:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 04:51:34 2012] Updating source flux to 1.4e-14
[Tue May 22 04:52:03 2012] Flag b found in src. 24 procflags, skipping spectral fitting
[Tue May 22 04:52:03 2012] Source 24 has fewer than 100.000000 counts, skipping spectral fitting