[Thu May  2 01:26:30 2013] Detection parameters:
  Position = (152.1, 469.1) = 2 26 7.83 -4 18 42.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 581.5 +/- 32.7
  Background counts = 89.2
  Rate = 0.02 +/- 0.0008

[Thu May  2 01:26:31 2013] Off-axis axis estimate = 16.30'
[Thu May  2 01:29:54 2013] Using EEF radius (= 14.58 ")to estimate initial spatial extent for simple fitting
[Thu May  2 01:29:54 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  2 01:29:54 2013] Initial guess for spatial extent in simple fitting = 14.58"
[Thu May  2 01:29:54 2013] source mask rpix=3.4, npix_max = 59, mask sum = 64, frac = 1.079
[Thu May  2 01:29:54 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 14.58"
[Thu May  2 02:26:17 2013] fullrun_pn_xmm0112681001_pi300-10000_cl_pass0_src5.ximg exists
[Thu May  2 02:26:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112681001_pi300-10000_cl_pass0_src5.csv
[Thu May  2 02:26:17 2013] fullrun_pn_xmm0112681001_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu May  2 02:26:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112681001_pi300-10000_cl_pass0_src5.csv
[Thu May  2 02:26:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112681001_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112681001_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 02:26:17 2013] fullrun_pn_xmm0112681001_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu May  2 02:26:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112681001_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu May  2 02:26:17 2013] fullrun_pn_xmm0112681001_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu May  2 02:26:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112681001_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu May  2 02:26:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112681001_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112681001_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 03:33:07 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 18.405502 pixels away
[Thu May  2 03:33:08 2013] Vigneting correction estimate = 1.000000
[Thu May  2 03:33:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 03:33:08 2013] Assessing source extent using major
[Thu May  2 03:33:08 2013] Source does appear to be extended
[Thu May  2 03:33:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 03:33:26 2013] Using EEF radius (= 14.58 ")to estimate initial spatial extent for simple fitting
[Thu May  2 03:33:26 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  2 03:33:26 2013] Initial guess for spatial extent in simple fitting = 14.58"
[Thu May  2 03:33:26 2013] source mask rpix=3.4, npix_max = 59, mask sum = 64, frac = 1.079
[Thu May  2 03:33:26 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 14.58"
[Thu May  2 04:26:09 2013] fullrun_pn_xmm0112681001_pi300-10000_cl_pass1_src5.ximg exists
[Thu May  2 04:26:09 2013] fullrun_pn_xmm0112681001_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu May  2 04:26:09 2013] Fit fullrun_pn_xmm0112681001_pi300-10000_cl_pass1_src5 appears to have run properly
[Thu May  2 04:26:09 2013] fullrun_pn_xmm0112681001_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu May  2 04:26:09 2013] fullrun_pn_xmm0112681001_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu May  2 04:26:09 2013] Fit fullrun_pn_xmm0112681001_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu May  2 05:26:51 2013] Spatial fit model total counts = 683.723000, observed total counts = 645.000000
[Thu May  2 05:26:51 2013] Offset between fit and detection position for source 7 = 0.494284 pixels
[Thu May  2 05:26:51 2013] 684.085000 total counts/ 371.635000 bgd. counts: snr = 16.207731
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.494284 pixels
  Position = (152.3, 469.5) = 2 26 7.79 -4 18 42.8
  Extent = 14.0 (12.3-16.1)", rotation angle = 308 (304-311) degrees
  Source counts = 312.4 +/- 26.2
  Background counts = 371.6
  Rate = 0.01 +/- 0.001
[Thu May  2 05:26:51 2013] Vigneting correction estimate = 1.000000
[Thu May  2 05:26:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 05:26:51 2013] Assessing source extent using major axis lower bound
[Thu May  2 05:26:51 2013] Source does appear to be extended
[Thu May  2 05:26:51 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.08
[Thu May  2 05:26:51 2013] Source is asymmetric
[Thu May  2 05:27:10 2013] XMMSAS src. selection expression = ellipse(13199.131800, 40802.220000, 837.372024, 218.652006, 308.018250, X, Y)
[Thu May  2 05:27:10 2013] Writing source region out to fullrun_pn_xmm0112681001_pi300-10000_pass1_cl_src7_src.reg
[Thu May  2 05:27:10 2013] Extracting stamp from image fullrun_pn_xmm0112681001_pi300-10000_cl_sm2.00.img.gz, (104, 421) - (200, 518)
[Thu May  2 05:27:10 2013] XMMSAS bgd. selection expression = annulus(13199.131800, 40802.220000, 1395.620040, 2791.240080, X, Y)
[Thu May  2 05:27:10 2013] Writing fullrun_pn_xmm0112681001_pi300-10000_pass1_cl_src7.gif
[Thu May  2 05:31:02 2013] Mean detx,y = (-17191.08, -9605.43) 
[Thu May  2 05:31:04 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  2 05:31:29 2013] Binned source spectrum to 10 counts/bin
[Thu May  2 05:31:29 2013] Setting source spectrum file to fullrun_pn_xmm0112681001_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu May  2 05:31:29 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112681001_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu May  2 06:44:26 2013] Updating aperture counts using extracted products
[Thu May  2 06:44:27 2013] Total counts from fullrun_pn_xmm0112681001_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 237.00
[Thu May  2 06:44:27 2013] Total counts from fullrun_pn_xmm0112681001_pi300-10000_pass1_cl_src7_bgd.pi.gz = 1075.00
[Thu May  2 06:44:27 2013] Got source and background scale factors 561032.000000, 10015646.000000
[Thu May  2 06:44:27 2013] User source parameters:
  Position = (152.3, 469.5) = 2 26 7.79 -4 18 42.8
  Extent = 14.0 (12.3-16.1)", rotation angle = 308 (304-311) degrees
  Source aperture counts = 176.8 +/- 16.4
  Background aperture counts = 60.2
  Rate = 0.007 +/- 0.0007

[Thu May  2 06:44:33 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 06:44:33 2013] Using photon index=1.80, rate=0.013, arf fullrun_pn_xmm0112681001_pi300-10000_pass1_cl_src7.arf
[Thu May  2 06:44:33 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 06:44:33 2013] Updating source flux to 1.4e-13
[Thu May  2 06:44:46 2013] xmm0112681001/analysis//spectral/fullrun_pn_xmm0112681001_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete