[Thu May 2 01:26:30 2013] Detection parameters: Position = (348.7, 321.0) = 2 25 10.65 -4 29 29.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 180.8 +/- 20.0 Background counts = 127.8 Rate = 0.006 +/- 0.0007 [Thu May 2 01:26:31 2013] Off-axis axis estimate = 4.00' [Thu May 2 01:29:54 2013] Using EEF radius (= 8.43 ")to estimate initial spatial extent for simple fitting [Thu May 2 01:29:54 2013] Initial guess for spatial extent in simple fitting = 8.43" [Thu May 2 01:29:54 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.842 [Thu May 2 01:29:54 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 8.43" [Thu May 2 02:26:17 2013] fullrun_pn_xmm0112681001_pi300-10000_cl_pass0_src32.ximg exists [Thu May 2 02:26:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112681001_pi300-10000_cl_pass0_src32.csv [Thu May 2 02:26:17 2013] fullrun_pn_xmm0112681001_pi300-10000_cl_pass0_src32_1.ximg exists [Thu May 2 02:26:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112681001_pi300-10000_cl_pass0_src32.csv [Thu May 2 02:26:17 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112681001_pi300-10000_cl_pass0_src32_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112681001_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 02:26:18 2013] fullrun_pn_xmm0112681001_pi300-10000_cl_pass0_tfrozen_src32.ximg exists [Thu May 2 02:26:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112681001_pi300-10000_cl_pass0_tfrozen_src32.csv [Thu May 2 02:26:18 2013] fullrun_pn_xmm0112681001_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists [Thu May 2 02:26:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112681001_pi300-10000_cl_pass0_tfrozen_src32.csv [Thu May 2 02:26:18 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112681001_pi300-10000_cl_pass0_tfrozen_src32_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112681001_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 03:33:08 2013] Source 35 is offset by 5.885631 and -7.223155 pixels which is larger than 2 X fitted extent = 0.968690 x 0.968690, not incorporating fit results [Thu May 2 03:33:08 2013] Vigneting correction estimate = 1.000000 [Thu May 2 03:33:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 2 03:33:08 2013] Assessing source extent using major [Thu May 2 03:33:08 2013] Source does appear to be extended [Thu May 2 03:33:08 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 2 03:33:26 2013] Using EEF radius (= 8.43 ")to estimate initial spatial extent for simple fitting [Thu May 2 03:33:26 2013] Initial guess for spatial extent in simple fitting = 8.43" [Thu May 2 03:33:26 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.842 [Thu May 2 03:33:26 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 8.43" [Thu May 2 04:26:09 2013] fullrun_pn_xmm0112681001_pi300-10000_cl_pass1_src31.ximg exists [Thu May 2 04:26:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112681001_pi300-10000_cl_pass1_src31.csv [Thu May 2 04:26:09 2013] fullrun_pn_xmm0112681001_pi300-10000_cl_pass1_src31_1.ximg exists [Thu May 2 04:26:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112681001_pi300-10000_cl_pass1_src31.csv [Thu May 2 04:26:09 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112681001_pi300-10000_cl_pass1_src31_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112681001_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 04:26:10 2013] fullrun_pn_xmm0112681001_pi300-10000_cl_pass1_tfrozen_src31.ximg exists [Thu May 2 04:26:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112681001_pi300-10000_cl_pass1_tfrozen_src31.csv [Thu May 2 04:26:10 2013] fullrun_pn_xmm0112681001_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists [Thu May 2 04:26:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112681001_pi300-10000_cl_pass1_tfrozen_src31.csv [Thu May 2 04:26:10 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112681001_pi300-10000_cl_pass1_tfrozen_src31_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112681001_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 05:26:51 2013] Spatial fit model total counts = 306.320000, observed total counts = 236.000000 [Thu May 2 05:26:51 2013] Poor agreement between spatial fit and data for source 35 It may help to tweak spatial fit manually Not incorporating fit results [Thu May 2 05:26:51 2013] Vigneting correction estimate = 1.000000 [Thu May 2 05:26:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 2 05:26:51 2013] Assessing source extent using major [Thu May 2 05:26:51 2013] Source does appear to be extended [Thu May 2 05:26:51 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 2 05:27:10 2013] XMMSAS src. selection expression = ellipse(30291.565857, 27882.105530, 652.500000, 652.500000, 0.000000, X, Y) [Thu May 2 05:27:10 2013] Writing source region out to fullrun_pn_xmm0112681001_pi300-10000_pass1_cl_src35_src.reg [Thu May 2 05:27:10 2013] Extracting stamp from image fullrun_pn_xmm0112681001_pi300-10000_cl_sm2.00.img.gz, (311, 284) - (386, 359) [Thu May 2 05:27:10 2013] XMMSAS bgd. selection expression = annulus(30291.565857, 27882.105530, 1087.500000, 2175.000000, X, Y) && !ellipse(29172.755096, 30583.820862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31583.675690, 28686.462585, 870.000000, 870.000000, 0.000000, X, Y) [Thu May 2 05:27:10 2013] Writing fullrun_pn_xmm0112681001_pi300-10000_pass1_cl_src35.gif [Thu May 2 05:47:05 2013] Mean detx,y = (2584.98, -1640.14) [Thu May 2 05:47:08 2013] Setting backscal keywords in source and bgd. spectrum [Thu May 2 05:47:38 2013] Binned source spectrum to 10 counts/bin [Thu May 2 05:47:38 2013] Setting source spectrum file to fullrun_pn_xmm0112681001_pi300-10000_pass1_cl_src35_src_b10.pi.gz [Thu May 2 05:47:38 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112681001_pi300-10000_pass1_cl_src35_bgd.pi.gz [Thu May 2 06:06:33 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Thu May 2 06:06:33 2013] rmf not generated due to insufficient counts [Thu May 2 06:44:31 2013] Updating aperture counts using extracted products [Thu May 2 06:44:31 2013] Total counts from fullrun_pn_xmm0112681001_pi300-10000_pass1_cl_src35_src_b10.pi.gz = 180.00 [Thu May 2 06:44:31 2013] Total counts from fullrun_pn_xmm0112681001_pi300-10000_pass1_cl_src35_bgd.pi.gz = 1083.00 [Thu May 2 06:44:31 2013] Got source and background scale factors 946149.000000, 7842379.000000 [Thu May 2 06:44:31 2013] User source parameters: Position = (348.7, 321.0) = 2 25 10.65 -4 29 29.0 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 49.3 +/- 14.4 Background aperture counts = 130.7 Rate = 0.002 +/- 0.0006 [Thu May 2 06:44:31 2013] Updating counts from extracted products [Thu May 2 06:44:31 2013] Set source signif. to 49.34/11.43 = 4.32 [Thu May 2 06:44:33 2013] Calculating source flux in energy range 0.30-8.00 [Thu May 2 06:44:33 2013] Using photon index=1.80, rate=0.00205, arf fullrun_pn_xmm0112681001_pi300-10000_pass1_cl_src35.arf [Thu May 2 06:44:33 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 2 06:44:33 2013] Updating source flux to 5.8e-15 [Thu May 2 06:44:44 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu May 2 06:44:46 2013] xmm0112681001/analysis//spectral/fullrun_pn_xmm0112681001_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete