[Thu May  2 01:26:54 2013] Detection parameters:
  Position = (467.4, 190.1) = 2 24 36.12 -4 39 0.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.2 +/- 13.5
  Background counts = 20.4
  Rate = 0.002 +/- 0.0003

[Thu May  2 01:26:55 2013] Off-axis axis estimate = 14.55'
[Thu May  2 02:26:18 2013] Using EEF radius (= 13.70 ")to estimate initial spatial extent for simple fitting
[Thu May  2 02:26:18 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  2 02:26:18 2013] Initial guess for spatial extent in simple fitting = 13.70"
[Thu May  2 02:26:18 2013] source mask rpix=3.2, npix_max = 53, mask sum = 45, frac = 0.844
[Thu May  2 02:26:18 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 13.70"
[Thu May  2 03:03:10 2013] fullrun_mos1_xmm0112681001_pi300-10000_cl_pass0_src15.ximg exists
[Thu May  2 03:03:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112681001_pi300-10000_cl_pass0_src15.csv
[Thu May  2 03:03:10 2013] fullrun_mos1_xmm0112681001_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu May  2 03:03:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112681001_pi300-10000_cl_pass0_src15.csv
[Thu May  2 03:03:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112681001_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112681001_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 03:03:10 2013] fullrun_mos1_xmm0112681001_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu May  2 03:03:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112681001_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu May  2 03:03:10 2013] fullrun_mos1_xmm0112681001_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu May  2 03:03:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112681001_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu May  2 03:03:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112681001_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112681001_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 03:33:12 2013] Spatial fit model total counts = 341.125000, observed total counts = 272.000000
[Thu May  2 03:33:12 2013] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  2 03:33:12 2013] Vigneting correction estimate = 1.000000
[Thu May  2 03:33:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 03:33:12 2013] Assessing source extent using major
[Thu May  2 03:33:12 2013] Source does appear to be extended
[Thu May  2 03:33:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 04:26:10 2013] Using EEF radius (= 13.70 ")to estimate initial spatial extent for simple fitting
[Thu May  2 04:26:10 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  2 04:26:10 2013] Initial guess for spatial extent in simple fitting = 13.70"
[Thu May  2 04:26:10 2013] source mask rpix=3.2, npix_max = 53, mask sum = 45, frac = 0.844
[Thu May  2 04:26:10 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 13.70"
[Thu May  2 05:00:17 2013] fullrun_mos1_xmm0112681001_pi300-10000_cl_pass1_src15.ximg exists
[Thu May  2 05:00:17 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112681001_pi300-10000_cl_pass1_src15.csv
[Thu May  2 05:00:17 2013] fullrun_mos1_xmm0112681001_pi300-10000_cl_pass1_src15_1.ximg exists
[Thu May  2 05:00:17 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112681001_pi300-10000_cl_pass1_src15.csv
[Thu May  2 05:00:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112681001_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112681001_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 05:00:17 2013] fullrun_mos1_xmm0112681001_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Thu May  2 05:00:17 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112681001_pi300-10000_cl_pass1_tfrozen_src15.csv
[Thu May  2 05:00:17 2013] fullrun_mos1_xmm0112681001_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Thu May  2 05:00:17 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112681001_pi300-10000_cl_pass1_tfrozen_src15.csv
[Thu May  2 05:00:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112681001_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112681001_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 05:26:56 2013] Warning, spatial fit 15 centroid is now closest to src. 24
[Thu May  2 05:26:56 2013] Vigneting correction estimate = 1.000000
[Thu May  2 05:26:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 05:26:56 2013] Assessing source extent using major
[Thu May  2 05:26:56 2013] Source does appear to be extended
[Thu May  2 05:26:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 06:16:12 2013] XMMSAS src. selection expression = ellipse(40613.902924, 16491.151031, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  2 06:16:12 2013] Writing source region out to fullrun_mos1_xmm0112681001_pi300-10000_pass1_cl_src5_src.reg
[Thu May  2 06:16:12 2013] Extracting stamp from image fullrun_mos1_xmm0112681001_pi300-10000_cl_sm2.00.img.gz, (430, 153) - (505, 228)
[Thu May  2 06:16:12 2013] XMMSAS bgd. selection expression = annulus(40613.902924, 16491.151031, 1087.500000, 2175.000000, X, Y) && !ellipse(39290.745178, 18920.946228, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  2 06:16:12 2013] Writing fullrun_mos1_xmm0112681001_pi300-10000_pass1_cl_src5.gif
[Thu May  2 06:19:58 2013] Mean detx,y = (-6620.35, 15171.20) 
[Thu May  2 06:19:58 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  2 06:20:13 2013] Binned source spectrum to 10 counts/bin
[Thu May  2 06:20:13 2013] Setting source spectrum file to fullrun_mos1_xmm0112681001_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu May  2 06:20:13 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112681001_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu May  2 06:30:24 2013] Not generating rmf since there are only 89 counts
[Thu May  2 06:30:24 2013] rmf not generated due to insufficient counts
[Thu May  2 06:44:34 2013] Updating aperture counts using extracted products
[Thu May  2 06:44:34 2013] Total counts from fullrun_mos1_xmm0112681001_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 162.00
[Thu May  2 06:44:34 2013] Total counts from fullrun_mos1_xmm0112681001_pi300-10000_pass1_cl_src5_bgd.pi.gz = 487.00
[Thu May  2 06:44:35 2013] Got source and background scale factors 756320.000000, 4277945.000000
[Thu May  2 06:44:35 2013] User source parameters:
  Position = (467.4, 190.1) = 2 24 36.12 -4 39 0.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 75.9 +/- 13.8
  Background aperture counts = 86.1
  Rate = 0.002 +/- 0.0004

[Thu May  2 06:44:35 2013] Updating counts from extracted products
[Thu May  2 06:44:35 2013] Set source signif. to 75.90/9.28 = 8.18
[Thu May  2 06:44:36 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 06:44:36 2013] Using photon index=1.80, rate=0.00211, arf fullrun_mos1_xmm0112681001_pi300-10000_pass1_cl_src5.arf
[Thu May  2 06:44:36 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 06:44:36 2013] Updating source flux to 7e-14
[Thu May  2 06:44:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May  2 06:44:43 2013] xmm0112681001/analysis//spectral/fullrun_mos1_xmm0112681001_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete