[Wed May 29 02:33:03 2013] Detection parameters:
  Position = (351.6, 248.1) = 2 21 49.52 -4 54 49.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.2 +/- 10.4
  Background counts = 10.5
  Rate = 0.009 +/- 0.001

[Wed May 29 02:33:04 2013] Off-axis axis estimate = 5.30'
[Wed May 29 02:33:33 2013] Using EEF radius (= 9.08 ")to estimate initial spatial extent for simple fitting
[Wed May 29 02:33:33 2013] Initial guess for spatial extent in simple fitting = 9.08"
[Wed May 29 02:33:33 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.933
[Wed May 29 02:33:33 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 9.08"
[Wed May 29 02:33:34 2013] fullrun_pn_xmm0112680801_pi300-10000_cl_pass0_src21.ximg exists
[Wed May 29 02:33:34 2013] fullrun_pn_xmm0112680801_pi300-10000_cl_pass0_src21_1.ximg exists
[Wed May 29 02:33:34 2013] Fit fullrun_pn_xmm0112680801_pi300-10000_cl_pass0_src21 appears to have run properly
[Wed May 29 02:33:34 2013] fullrun_pn_xmm0112680801_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Wed May 29 02:33:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680801_pi300-10000_cl_pass0_tfrozen_src21.csv
[Wed May 29 02:33:34 2013] fullrun_pn_xmm0112680801_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Wed May 29 02:33:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680801_pi300-10000_cl_pass0_tfrozen_src21.csv
[Wed May 29 02:33:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112680801_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112680801_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 02:33:46 2013] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 13.231011 pixels away
[Wed May 29 02:33:46 2013] Vigneting correction estimate = 1.000000
[Wed May 29 02:33:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 02:33:46 2013] Assessing source extent using major
[Wed May 29 02:33:46 2013] Source does appear to be extended
[Wed May 29 02:33:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 02:34:11 2013] Using EEF radius (= 9.08 ")to estimate initial spatial extent for simple fitting
[Wed May 29 02:34:11 2013] Initial guess for spatial extent in simple fitting = 9.08"
[Wed May 29 02:34:11 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.933
[Wed May 29 02:34:11 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 9.08"
[Wed May 29 02:34:12 2013] fullrun_pn_xmm0112680801_pi300-10000_cl_pass1_src20.ximg exists
[Wed May 29 02:34:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680801_pi300-10000_cl_pass1_src20.csv
[Wed May 29 02:34:12 2013] fullrun_pn_xmm0112680801_pi300-10000_cl_pass1_src20_1.ximg exists
[Wed May 29 02:34:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680801_pi300-10000_cl_pass1_src20.csv
[Wed May 29 02:34:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112680801_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112680801_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 02:34:12 2013] fullrun_pn_xmm0112680801_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Wed May 29 02:34:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680801_pi300-10000_cl_pass1_tfrozen_src20.csv
[Wed May 29 02:34:12 2013] fullrun_pn_xmm0112680801_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Wed May 29 02:34:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680801_pi300-10000_cl_pass1_tfrozen_src20.csv
[Wed May 29 02:34:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112680801_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112680801_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 02:34:24 2013] Spatial fit model total counts = 149.071000, observed total counts = 133.000000
[Wed May 29 02:34:24 2013] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 02:34:24 2013] Vigneting correction estimate = 1.000000
[Wed May 29 02:34:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 02:34:24 2013] Assessing source extent using major
[Wed May 29 02:34:24 2013] Source does appear to be extended
[Wed May 29 02:34:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 02:34:46 2013] XMMSAS src. selection expression = ellipse(30536.664886, 21537.328918, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 02:34:46 2013] Not overwriting source region fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src21_src.reg
[Wed May 29 02:34:46 2013] Extracting stamp from image fullrun_pn_xmm0112680801_pi300-10000_cl_sm2.00.img.gz, (314, 211) - (389, 286)
[Wed May 29 02:34:46 2013] XMMSAS bgd. selection expression = annulus(30536.664886, 21537.328918, 1087.500000, 2175.000000, X, Y)
[Wed May 29 02:34:46 2013] Writing fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src21.gif
[Wed May 29 02:34:47 2013] ../../xmm0112680801/products/events/fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src21_src.evt and ../../xmm0112680801/products/events/fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src21_bgd.evt exist, delete to re-create
[Wed May 29 02:34:47 2013] Mean detx,y = (4444.94, 4552.95) 
[Wed May 29 02:34:47 2013] ../../xmm0112680801/products/images/fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src21_src.img and ../../xmm0112680801/products/images/fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src21_bgd.img exist, delete to re-create
[Wed May 29 02:34:47 2013] ../../xmm0112680801/products/spectra/fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src21_src_b10.pi.gz and ../../xmm0112680801/products/spectra/fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src21_bgd.pi exist, delete to re-create
[Wed May 29 02:34:47 2013] Setting source spectrum file to fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Wed May 29 02:34:47 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Wed May 29 02:34:47 2013] ../../xmm0112680801/products/lightcurves/fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src21_src.lc and ../../xmm0112680801/products/lightcurves/fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src21_bgd.lc exist, delete to re-create
[Wed May 29 02:34:54 2013] Not generating rmf since there are only 64 counts
[Wed May 29 02:34:54 2013] rmf not generated due to insufficient counts
[Wed May 29 02:34:54 2013] fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src21.arf exists, delete to re-create
[Wed May 29 02:40:56 2013] Updating aperture counts using extracted products
[Wed May 29 02:40:56 2013] Total counts from fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 109.00
[Wed May 29 02:40:56 2013] Total counts from fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src21_bgd.pi.gz = 520.00
[Wed May 29 02:40:56 2013] Got source and background scale factors 1090588.000000, 9213640.000000
[Wed May 29 02:40:56 2013] User source parameters:
  Position = (351.6, 248.1) = 2 21 49.52 -4 54 49.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 47.4 +/- 11.5
  Background aperture counts = 61.6
  Rate = 0.004 +/- 0.001

[Wed May 29 02:40:56 2013] Updating counts from extracted products
[Wed May 29 02:40:56 2013] Set source signif. to 47.45/7.85 = 6.05
[Wed May 29 02:40:58 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 02:40:58 2013] Using photon index=1.80, rate=0.00432, arf fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src21.arf
[Wed May 29 02:40:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 02:40:58 2013] Updating source flux to 1.5e-14
[Wed May 29 02:41:13 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 02:41:15 2013] xmm0112680801/analysis//spectral/fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete