[Wed May 29 02:33:03 2013] Detection parameters:
  Position = (377.2, 298.0) = 2 21 42.06 -4 51 11.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.3 +/- 9.7
  Background counts = 11.2
  Rate = 0.006 +/- 0.001

[Wed May 29 02:33:04 2013] Off-axis axis estimate = 5.71'
[Wed May 29 02:33:33 2013] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Wed May 29 02:33:33 2013] Initial guess for spatial extent in simple fitting = 9.28"
[Wed May 29 02:33:33 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.081
[Wed May 29 02:33:33 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 9.28"
[Wed May 29 02:33:34 2013] fullrun_pn_xmm0112680801_pi300-10000_cl_pass0_src16.ximg exists
[Wed May 29 02:33:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680801_pi300-10000_cl_pass0_src16.csv
[Wed May 29 02:33:34 2013] fullrun_pn_xmm0112680801_pi300-10000_cl_pass0_src16_1.ximg exists
[Wed May 29 02:33:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680801_pi300-10000_cl_pass0_src16.csv
[Wed May 29 02:33:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112680801_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112680801_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 02:33:34 2013] fullrun_pn_xmm0112680801_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Wed May 29 02:33:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680801_pi300-10000_cl_pass0_tfrozen_src16.csv
[Wed May 29 02:33:34 2013] fullrun_pn_xmm0112680801_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Wed May 29 02:33:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680801_pi300-10000_cl_pass0_tfrozen_src16.csv
[Wed May 29 02:33:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112680801_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112680801_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 02:33:46 2013] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 11.267221 pixels away
[Wed May 29 02:33:46 2013] Vigneting correction estimate = 1.000000
[Wed May 29 02:33:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 02:33:46 2013] Assessing source extent using major
[Wed May 29 02:33:46 2013] Source does appear to be extended
[Wed May 29 02:33:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 02:34:11 2013] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Wed May 29 02:34:11 2013] Initial guess for spatial extent in simple fitting = 9.28"
[Wed May 29 02:34:11 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.081
[Wed May 29 02:34:11 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 9.28"
[Wed May 29 02:34:12 2013] fullrun_pn_xmm0112680801_pi300-10000_cl_pass1_src15.ximg exists
[Wed May 29 02:34:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680801_pi300-10000_cl_pass1_src15.csv
[Wed May 29 02:34:12 2013] fullrun_pn_xmm0112680801_pi300-10000_cl_pass1_src15_1.ximg exists
[Wed May 29 02:34:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680801_pi300-10000_cl_pass1_src15.csv
[Wed May 29 02:34:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112680801_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112680801_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 02:34:12 2013] fullrun_pn_xmm0112680801_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Wed May 29 02:34:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680801_pi300-10000_cl_pass1_tfrozen_src15.csv
[Wed May 29 02:34:12 2013] fullrun_pn_xmm0112680801_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Wed May 29 02:34:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680801_pi300-10000_cl_pass1_tfrozen_src15.csv
[Wed May 29 02:34:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112680801_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112680801_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 02:34:24 2013] Spatial fit model total counts = 151.852000, observed total counts = 122.000000
[Wed May 29 02:34:24 2013] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 02:34:24 2013] Source 16 is offset by 7.067941 and 5.909799 pixels which is larger than
2 X fitted extent = 1.013513 x 1.013513, not incorporating fit results
[Wed May 29 02:34:24 2013] Vigneting correction estimate = 1.000000
[Wed May 29 02:34:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 02:34:24 2013] Assessing source extent using major
[Wed May 29 02:34:24 2013] Source does appear to be extended
[Wed May 29 02:34:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 02:34:46 2013] XMMSAS src. selection expression = ellipse(32765.816864, 25879.058502, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 02:34:46 2013] Not overwriting source region fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src16_src.reg
[Wed May 29 02:34:46 2013] Extracting stamp from image fullrun_pn_xmm0112680801_pi300-10000_cl_sm2.00.img.gz, (340, 261) - (415, 336)
[Wed May 29 02:34:46 2013] XMMSAS bgd. selection expression = annulus(32765.816864, 25879.058502, 1087.500000, 2175.000000, X, Y) && !ellipse(35037.529588, 28452.495820, 408.899422, 312.475903, 315.742324, X, Y) && !ellipse(31497.602295, 24606.224182, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 02:34:46 2013] Writing fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src16.gif
[Wed May 29 02:34:47 2013] ../../xmm0112680801/products/events/fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src16_src.evt and ../../xmm0112680801/products/events/fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src16_bgd.evt exist, delete to re-create
[Wed May 29 02:34:47 2013] Mean detx,y = (5601.82, -249.65) 
[Wed May 29 02:34:47 2013] ../../xmm0112680801/products/images/fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src16_src.img and ../../xmm0112680801/products/images/fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src16_bgd.img exist, delete to re-create
[Wed May 29 02:34:47 2013] ../../xmm0112680801/products/spectra/fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src16_src_b10.pi.gz and ../../xmm0112680801/products/spectra/fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src16_bgd.pi exist, delete to re-create
[Wed May 29 02:34:47 2013] Setting source spectrum file to fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed May 29 02:34:47 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Wed May 29 02:34:47 2013] ../../xmm0112680801/products/lightcurves/fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src16_src.lc and ../../xmm0112680801/products/lightcurves/fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src16_bgd.lc exist, delete to re-create
[Wed May 29 02:34:54 2013] Not generating rmf since there are only 50 counts
[Wed May 29 02:34:54 2013] rmf not generated due to insufficient counts
[Wed May 29 02:34:54 2013] fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src16.arf exists, delete to re-create
[Wed May 29 02:40:54 2013] Updating aperture counts using extracted products
[Wed May 29 02:40:54 2013] Total counts from fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 107.00
[Wed May 29 02:40:55 2013] Total counts from fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src16_bgd.pi.gz = 493.00
[Wed May 29 02:40:55 2013] Got source and background scale factors 1241745.000000, 8251746.000000
[Wed May 29 02:40:55 2013] User source parameters:
  Position = (377.2, 298.0) = 2 21 42.06 -4 51 11.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 32.8 +/- 11.4
  Background aperture counts = 74.2
  Rate = 0.003 +/- 0.001

[Wed May 29 02:40:55 2013] Updating counts from extracted products
[Wed May 29 02:40:55 2013] Set source signif. to 32.81/8.61 = 3.81
[Wed May 29 02:40:58 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 02:40:58 2013] Using photon index=1.80, rate=0.00299, arf fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src16.arf
[Wed May 29 02:40:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 02:40:58 2013] Updating source flux to 9.4e-15
[Wed May 29 02:41:13 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 02:41:15 2013] xmm0112680801/analysis//spectral/fullrun_pn_xmm0112680801_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete