[Wed May 29 02:33:07 2013] Detection parameters:
  Position = (351.2, 248.0) = 2 21 49.61 -4 54 49.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.0 +/- 7.1
  Background counts = 4.2
  Rate = 0.003 +/- 0.0006

[Wed May 29 02:33:07 2013] Off-axis axis estimate = 5.29'
[Wed May 29 02:33:36 2013] Using EEF radius (= 9.08 ")to estimate initial spatial extent for simple fitting
[Wed May 29 02:33:36 2013] Initial guess for spatial extent in simple fitting = 9.08"
[Wed May 29 02:33:36 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.121
[Wed May 29 02:33:36 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 9.08"
[Wed May 29 02:33:36 2013] fullrun_mos2_xmm0112680801_pi300-10000_cl_pass0_src13.ximg exists
[Wed May 29 02:33:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680801_pi300-10000_cl_pass0_src13.csv
[Wed May 29 02:33:36 2013] fullrun_mos2_xmm0112680801_pi300-10000_cl_pass0_src13_1.ximg exists
[Wed May 29 02:33:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680801_pi300-10000_cl_pass0_src13.csv
[Wed May 29 02:33:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112680801_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112680801_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 02:33:36 2013] fullrun_mos2_xmm0112680801_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Wed May 29 02:33:36 2013] fullrun_mos2_xmm0112680801_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Wed May 29 02:33:36 2013] Fit fullrun_mos2_xmm0112680801_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Wed May 29 02:33:57 2013] Spatial fit model total counts = 75.532900, observed total counts = 74.000000
[Wed May 29 02:33:57 2013] Offset between fit and detection position for source 11 = 8.210752 pixels
[Wed May 29 02:33:57 2013] Warning, changing simple spatial fit ID from 13 to 9
[Wed May 29 02:33:57 2013] 79.227920 total counts/ 79.227900 bgd. counts: snr = 0.000002
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 8.210752 pixels
  Position = (344.1, 252.1) = 2 21 51.68 -4 54 31.1
  Extent = 17.7 (2.2-33.2)", rotation angle = 0
  Source counts = 0.0 +/- 8.9
  Background counts = 79.2
  Rate = 1e-09 +/- 0.0006
  Deleting source due to low Poisson probability