[Wed May 29 02:33:06 2013] Detection parameters:
  Position = (177.3, 441.4) = 2 22 40.22 -4 40 44.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.3 +/- 7.4
  Background counts = 3.0
  Rate = 0.002 +/- 0.0005

[Wed May 29 02:33:06 2013] Off-axis axis estimate = 13.58'
[Wed May 29 02:33:35 2013] Using EEF radius (= 13.22 ")to estimate initial spatial extent for simple fitting
[Wed May 29 02:33:35 2013] Initial guess for spatial extent in simple fitting = 13.22"
[Wed May 29 02:33:35 2013] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.978
[Wed May 29 02:33:35 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 13.22"
[Wed May 29 02:33:35 2013] fullrun_mos1_xmm0112680801_pi300-10000_cl_pass0_src16.ximg exists
[Wed May 29 02:33:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112680801_pi300-10000_cl_pass0_src16.csv
[Wed May 29 02:33:35 2013] fullrun_mos1_xmm0112680801_pi300-10000_cl_pass0_src16_1.ximg exists
[Wed May 29 02:33:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112680801_pi300-10000_cl_pass0_src16.csv
[Wed May 29 02:33:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112680801_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112680801_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 02:33:35 2013] fullrun_mos1_xmm0112680801_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Wed May 29 02:33:35 2013] fullrun_mos1_xmm0112680801_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Wed May 29 02:33:35 2013] Fit fullrun_mos1_xmm0112680801_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Wed May 29 02:33:52 2013] Spatial fit model total counts = 56.816900, observed total counts = 51.000000
[Wed May 29 02:33:52 2013] Offset between fit and detection position for source 18 = 0.096199 pixels
[Wed May 29 02:33:52 2013] 57.255000 total counts/ 29.706500 bgd. counts: snr = 5.054430
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.096199 pixels
  Position = (177.4, 441.4) = 2 22 40.20 -4 40 47.5
  Extent = 8.2 (4.7-11.4)", rotation angle = 0
  Source counts = 27.5 +/- 7.6
  Background counts = 29.7
  Rate = 0.002 +/- 0.0005
[Wed May 29 02:33:52 2013] Vigneting correction estimate = 1.000000
[Wed May 29 02:33:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 02:33:52 2013] Assessing source extent using major axis lower bound
[Wed May 29 02:33:52 2013] Source does appear to be extended
[Wed May 29 02:33:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 02:34:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 02:34:12 2013] Initial guess for spatial extent in simple fitting = 8.21"
[Wed May 29 02:34:12 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.096
[Wed May 29 02:34:12 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 8.21"
[Wed May 29 02:34:13 2013] fullrun_mos1_xmm0112680801_pi300-10000_cl_pass1_src16.ximg exists
[Wed May 29 02:34:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112680801_pi300-10000_cl_pass1_src16.csv
[Wed May 29 02:34:13 2013] fullrun_mos1_xmm0112680801_pi300-10000_cl_pass1_src16_1.ximg exists
[Wed May 29 02:34:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112680801_pi300-10000_cl_pass1_src16.csv
[Wed May 29 02:34:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112680801_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112680801_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 02:34:13 2013] fullrun_mos1_xmm0112680801_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Wed May 29 02:34:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112680801_pi300-10000_cl_pass1_tfrozen_src16.csv
[Wed May 29 02:34:13 2013] fullrun_mos1_xmm0112680801_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Wed May 29 02:34:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112680801_pi300-10000_cl_pass1_tfrozen_src16.csv
[Wed May 29 02:34:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112680801_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112680801_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 02:34:28 2013] Spatial fit model total counts = 56.321800, observed total counts = 50.000000
[Wed May 29 02:34:28 2013] Offset between fit and detection position for source 18 = 0.094343 pixels
[Wed May 29 02:34:28 2013] 57.070400 total counts/ 32.417400 bgd. counts: snr = 4.329928
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.094343 pixels
  Position = (177.3, 441.4) = 2 22 40.22 -4 40 47.8
  Extent = 7.6 (3.7-11.4)", rotation angle = 0
  Source counts = 24.7 +/- 7.6
  Background counts = 32.4
  Rate = 0.002 +/- 0.0005
[Wed May 29 02:34:28 2013] Vigneting correction estimate = 1.000000
[Wed May 29 02:34:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 02:34:28 2013] Assessing source extent using major axis lower bound
[Wed May 29 02:34:28 2013] Source does appear to be extended
[Wed May 29 02:34:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 02:34:54 2013] XMMSAS src. selection expression = ellipse(15378.495000, 38353.323800, 456.381013, 456.381013, 0.000000, X, Y)
[Wed May 29 02:34:54 2013] Not overwriting source region fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src18_src.reg
[Wed May 29 02:34:54 2013] Extracting stamp from image fullrun_mos1_xmm0112680801_pi300-10000_cl_sm2.00.img.gz, (151, 415) - (204, 468)
[Wed May 29 02:34:54 2013] XMMSAS bgd. selection expression = annulus(15378.495000, 38353.323800, 760.635022, 1521.270044, X, Y)
[Wed May 29 02:34:54 2013] Writing fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src18.gif
[Wed May 29 02:34:54 2013] ../../xmm0112680801/products/events/fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src18_src.evt and ../../xmm0112680801/products/events/fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src18_bgd.evt exist, delete to re-create
[Wed May 29 02:34:54 2013] Mean detx,y = (7863.19, -14772.61) 
[Wed May 29 02:34:54 2013] ../../xmm0112680801/products/images/fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src18_src.img and ../../xmm0112680801/products/images/fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src18_bgd.img exist, delete to re-create
[Wed May 29 02:34:54 2013] ../../xmm0112680801/products/spectra/fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src18_src_b10.pi.gz and ../../xmm0112680801/products/spectra/fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src18_bgd.pi exist, delete to re-create
[Wed May 29 02:34:54 2013] Setting source spectrum file to fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed May 29 02:34:54 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed May 29 02:34:54 2013] ../../xmm0112680801/products/lightcurves/fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src18_src.lc and ../../xmm0112680801/products/lightcurves/fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src18_bgd.lc exist, delete to re-create
[Wed May 29 02:34:59 2013] Not generating rmf since there are only 24 counts
[Wed May 29 02:34:59 2013] rmf not generated due to insufficient counts
[Wed May 29 02:34:59 2013] fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src18.arf exists, delete to re-create
[Wed May 29 02:41:03 2013] Updating aperture counts using extracted products
[Wed May 29 02:41:03 2013] Total counts from fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 36.00
[Wed May 29 02:41:03 2013] Total counts from fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src18_bgd.pi.gz = 62.00
[Wed May 29 02:41:03 2013] Got source and background scale factors 646400.000000, 3438512.000000
[Wed May 29 02:41:03 2013] User source parameters:
  Position = (177.3, 441.4) = 2 22 40.22 -4 40 47.8
  Extent = 7.6 (3.7-11.4)", rotation angle = 0
  Source aperture counts = 24.3 +/- 7.1
  Background aperture counts = 11.7
  Rate = 0.002 +/- 0.0005

[Wed May 29 02:41:04 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 02:41:04 2013] Using photon index=1.80, rate=0.00164, arf fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src18.arf
[Wed May 29 02:41:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 02:41:04 2013] Updating source flux to 5.7e-14
[Wed May 29 02:41:11 2013] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 29 02:41:12 2013] xmm0112680801/analysis//spectral/fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete