[Wed May 29 02:33:04 2013] Detection parameters:
  Position = (132.5, 379.9) = 2 22 53.26 -4 45 12.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.9 +/- 8.7
  Background counts = 3.0
  Rate = 0.003 +/- 0.0006

[Wed May 29 02:33:06 2013] Off-axis axis estimate = 13.40'
[Wed May 29 02:33:35 2013] Using EEF radius (= 13.13 ")to estimate initial spatial extent for simple fitting
[Wed May 29 02:33:35 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 29 02:33:35 2013] Initial guess for spatial extent in simple fitting = 13.13"
[Wed May 29 02:33:35 2013] source mask rpix=3.0, npix_max = 49, mask sum = 43, frac = 0.869
[Wed May 29 02:33:35 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 13.13"
[Wed May 29 02:33:35 2013] fullrun_mos1_xmm0112680801_pi300-10000_cl_pass0_src3.ximg exists
[Wed May 29 02:33:35 2013] fullrun_mos1_xmm0112680801_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May 29 02:33:35 2013] Fit fullrun_mos1_xmm0112680801_pi300-10000_cl_pass0_src3 appears to have run properly
[Wed May 29 02:33:35 2013] fullrun_mos1_xmm0112680801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May 29 02:33:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112680801_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May 29 02:33:35 2013] fullrun_mos1_xmm0112680801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May 29 02:33:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112680801_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May 29 02:33:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112680801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112680801_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 02:33:52 2013] Spatial fit model total counts = 72.185000, observed total counts = 74.000000
[Wed May 29 02:33:52 2013] Offset between fit and detection position for source 1 = 0.493215 pixels
[Wed May 29 02:33:52 2013] 72.891500 total counts/ 43.308900 bgd. counts: snr = 4.495187
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.493215 pixels
  Position = (132.7, 379.4) = 2 22 53.20 -4 45 17.3
  Extent = 6.6" x 6.6", rotation angle = 0
  Source counts = 29.6 +/- 8.5
  Background counts = 43.3
  Rate = 0.002 +/- 0.0006
[Wed May 29 02:33:52 2013] Vigneting correction estimate = 1.000000
[Wed May 29 02:33:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 02:33:52 2013] Assessing source extent using major
[Wed May 29 02:33:52 2013] Source does appear to be extended
[Wed May 29 02:33:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 02:34:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 02:34:12 2013] Initial guess for spatial extent in simple fitting = 6.61"
[Wed May 29 02:34:12 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.980
[Wed May 29 02:34:12 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 6.61"
[Wed May 29 02:34:13 2013] fullrun_mos1_xmm0112680801_pi300-10000_cl_pass1_src3.ximg exists
[Wed May 29 02:34:13 2013] fullrun_mos1_xmm0112680801_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed May 29 02:34:13 2013] Fit fullrun_mos1_xmm0112680801_pi300-10000_cl_pass1_src3 appears to have run properly
[Wed May 29 02:34:13 2013] fullrun_mos1_xmm0112680801_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed May 29 02:34:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112680801_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed May 29 02:34:13 2013] fullrun_mos1_xmm0112680801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed May 29 02:34:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112680801_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed May 29 02:34:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112680801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112680801_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 02:34:28 2013] Warning, spatial fit 3 centroid is now closest to src. 2
[Wed May 29 02:34:28 2013] Vigneting correction estimate = 1.000000
[Wed May 29 02:34:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 02:34:28 2013] Assessing source extent using major
[Wed May 29 02:34:28 2013] Source does appear to be extended
[Wed May 29 02:34:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 02:34:54 2013] XMMSAS src. selection expression = ellipse(11499.946420, 32961.874200, 396.849011, 396.849011, 0.000000, X, Y)
[Wed May 29 02:34:54 2013] Not overwriting source region fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src1_src.reg
[Wed May 29 02:34:54 2013] Extracting stamp from image fullrun_mos1_xmm0112680801_pi300-10000_cl_sm2.00.img.gz, (110, 357) - (156, 402)
[Wed May 29 02:34:54 2013] XMMSAS bgd. selection expression = annulus(11499.946420, 32961.874200, 661.415019, 1322.830038, X, Y)
[Wed May 29 02:34:54 2013] Writing fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src1.gif
[Wed May 29 02:34:54 2013] ../../xmm0112680801/products/events/fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0112680801/products/events/fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed May 29 02:34:54 2013] Mean detx,y = (1662.57, -17121.25) 
[Wed May 29 02:34:54 2013] ../../xmm0112680801/products/images/fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src1_src.img and ../../xmm0112680801/products/images/fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed May 29 02:34:54 2013] ../../xmm0112680801/products/spectra/fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0112680801/products/spectra/fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed May 29 02:34:54 2013] Setting source spectrum file to fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 29 02:34:54 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May 29 02:34:54 2013] ../../xmm0112680801/products/lightcurves/fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0112680801/products/lightcurves/fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed May 29 02:34:59 2013] Not generating rmf since there are only 29 counts
[Wed May 29 02:34:59 2013] rmf not generated due to insufficient counts
[Wed May 29 02:34:59 2013] fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Wed May 29 02:40:59 2013] Updating aperture counts using extracted products
[Wed May 29 02:40:59 2013] Total counts from fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 44.00
[Wed May 29 02:40:59 2013] Total counts from fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src1_bgd.pi.gz = 65.00
[Wed May 29 02:40:59 2013] Got source and background scale factors 430962.000000, 2404847.000000
[Wed May 29 02:40:59 2013] User source parameters:
  Position = (132.7, 379.4) = 2 22 53.20 -4 45 17.3
  Extent = 6.6" x 6.6", rotation angle = 0
  Source aperture counts = 32.4 +/- 7.7
  Background aperture counts = 11.6
  Rate = 0.002 +/- 0.0005

[Wed May 29 02:41:04 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 02:41:04 2013] Using photon index=1.80, rate=0.00197, arf fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src1.arf
[Wed May 29 02:41:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 02:41:04 2013] Updating source flux to 7.6e-14
[Wed May 29 02:41:11 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 29 02:41:12 2013] xmm0112680801/analysis//spectral/fullrun_mos1_xmm0112680801_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete