[Tue Mar 13 11:52:28 2012] Detection parameters:
  Position = (382.6, 283.9) = 2 23 30.13 -4 30 4.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.3 +/- 10.9
  Background counts = 9.9
  Rate = 0.005 +/- 0.0008

[Tue Mar 13 11:52:30 2012] Off-axis axis estimate = 6.19'
[Tue Mar 13 11:53:10 2012] Using EEF radius (= 9.52 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:53:10 2012] Initial guess for spatial extent in simple fitting = 9.52"
[Tue Mar 13 11:53:10 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.037
[Tue Mar 13 11:53:10 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.52"
[Tue Mar 13 11:53:11 2012] fullrun_mos1_xmm0112680501_pi300-10000_cl_pass0_src4.ximg exists
[Tue Mar 13 11:53:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112680501_pi300-10000_cl_pass0_src4.csv
[Tue Mar 13 11:53:11 2012] fullrun_mos1_xmm0112680501_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Mar 13 11:53:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112680501_pi300-10000_cl_pass0_src4.csv
[Tue Mar 13 11:53:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112680501_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112680501_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:53:11 2012] fullrun_mos1_xmm0112680501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Mar 13 11:53:11 2012] fullrun_mos1_xmm0112680501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Mar 13 11:53:11 2012] Fit fullrun_mos1_xmm0112680501_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Tue Mar 13 11:53:36 2012] Spatial fit model total counts = 121.977000, observed total counts = 122.000000
[Tue Mar 13 11:53:36 2012] Offset between fit and detection position for source 10 = 0.115919 pixels
[Tue Mar 13 11:53:36 2012] 123.132900 total counts/ 82.953300 bgd. counts: snr = 4.411525
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.115919 pixels
  Position = (382.4, 284.0) = 2 23 30.16 -4 30 3.1
  Extent = 4.9 (3.9-7.1)", rotation angle = 0
  Source counts = 40.2 +/- 11.1
  Background counts = 83.0
  Rate = 0.002 +/- 0.0005
[Tue Mar 13 11:53:36 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:53:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:53:36 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:53:36 2012] Source does appear to be extended
[Tue Mar 13 11:53:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:54:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:54:04 2012] Initial guess for spatial extent in simple fitting = 4.86"
[Tue Mar 13 11:54:04 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.147
[Tue Mar 13 11:54:04 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 4.86"
[Tue Mar 13 11:54:05 2012] fullrun_mos1_xmm0112680501_pi300-10000_cl_pass1_src4.ximg exists
[Tue Mar 13 11:54:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112680501_pi300-10000_cl_pass1_src4.csv
[Tue Mar 13 11:54:05 2012] fullrun_mos1_xmm0112680501_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Mar 13 11:54:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112680501_pi300-10000_cl_pass1_src4.csv
[Tue Mar 13 11:54:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112680501_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112680501_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:54:05 2012] fullrun_mos1_xmm0112680501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Mar 13 11:54:05 2012] fullrun_mos1_xmm0112680501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Mar 13 11:54:05 2012] Fit fullrun_mos1_xmm0112680501_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Tue Mar 13 11:54:28 2012] Spatial fit model total counts = 121.952000, observed total counts = 122.000000
[Tue Mar 13 11:54:28 2012] Offset between fit and detection position for source 10 = 0.010692 pixels
[Tue Mar 13 11:54:28 2012] 123.106700 total counts/ 82.874400 bgd. counts: snr = 4.419414
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.010692 pixels
  Position = (382.4, 284.0) = 2 23 30.17 -4 30 3.1
  Extent = 4.9 (3.9-7.1)", rotation angle = 0
  Source counts = 40.2 +/- 11.1
  Background counts = 82.9
  Rate = 0.002 +/- 0.0005
[Tue Mar 13 11:54:28 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:54:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:54:28 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:54:28 2012] Source does appear to be extended
[Tue Mar 13 11:54:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:55:08 2012] XMMSAS src. selection expression = ellipse(33223.169000, 24655.919600, 292.779008, 292.779008, 0.000000, X, Y)
[Tue Mar 13 11:55:08 2012] Not overwriting source region fullrun_mos1_xmm0112680501_pi300-10000_pass1_cl_src10_src.reg
[Tue Mar 13 11:55:08 2012] Extracting stamp from image fullrun_mos1_xmm0112680501_pi300-10000_cl_sm2.00.img.gz, (366, 267) - (399, 301)
[Tue Mar 13 11:55:08 2012] XMMSAS bgd. selection expression = annulus(33223.169000, 24655.919600, 487.965014, 975.930028, X, Y)
[Tue Mar 13 11:55:08 2012] Writing fullrun_mos1_xmm0112680501_pi300-10000_pass1_cl_src10.gif
[Tue Mar 13 11:55:08 2012] ../../xmm0112680501/products/events/fullrun_mos1_xmm0112680501_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0112680501/products/events/fullrun_mos1_xmm0112680501_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Tue Mar 13 11:55:08 2012] Mean detx,y = (-2665.25, -8689.43) 
[Tue Mar 13 11:55:08 2012] ../../xmm0112680501/products/images/fullrun_mos1_xmm0112680501_pi300-10000_pass1_cl_src10_src.img and ../../xmm0112680501/products/images/fullrun_mos1_xmm0112680501_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Tue Mar 13 11:55:08 2012] ../../xmm0112680501/products/spectra/fullrun_mos1_xmm0112680501_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0112680501/products/spectra/fullrun_mos1_xmm0112680501_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Tue Mar 13 11:55:08 2012] Setting source spectrum file to fullrun_mos1_xmm0112680501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Mar 13 11:55:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112680501_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Mar 13 11:55:08 2012] ../../xmm0112680501/products/lightcurves/fullrun_mos1_xmm0112680501_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0112680501/products/lightcurves/fullrun_mos1_xmm0112680501_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Tue Mar 13 11:55:14 2012] Not generating rmf since there are only 40 counts
[Tue Mar 13 11:55:14 2012] rmf not generated due to insufficient counts
[Tue Mar 13 11:55:14 2012] fullrun_mos1_xmm0112680501_pi300-10000_pass1_cl_src10.arf exists, delete to re-create
[Tue Mar 13 11:55:55 2012] Updating aperture counts using extracted products
[Tue Mar 13 11:55:55 2012] Error reading totcts from fullrun_mos1_xmm0112680501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Mar 13 11:55:56 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:55:56 2012] Using photon index=1.80, rate=0.00182, arf fullrun_mos1_xmm0112680501_pi300-10000_pass1_cl_src10.arf
[Tue Mar 13 11:55:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 11:55:56 2012] Updating source flux to 4e-14
[Tue Mar 13 11:56:05 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Mar 13 11:56:06 2012] xmm0112680501/analysis//spectral/fullrun_mos1_xmm0112680501_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete