[Sun Jun  9 04:35:30 2013] Detection parameters:
  Position = (169.7, 494.2) = 2 28 42.58 -4 16 53.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.7 +/- 11.1
  Background counts = 17.8
  Rate = 0.003 +/- 0.0005

[Sun Jun  9 04:35:34 2013] Off-axis axis estimate = 16.99'
[Sun Jun  9 04:36:15 2013] Using EEF radius (= 14.92 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 04:36:15 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  9 04:36:15 2013] Initial guess for spatial extent in simple fitting = 14.92"
[Sun Jun  9 04:36:15 2013] source mask rpix=3.4, npix_max = 61, mask sum = 46, frac = 0.744
[Sun Jun  9 04:36:15 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 14.92"
[Sun Jun  9 04:36:16 2013] fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_src5.ximg exists
[Sun Jun  9 04:36:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_src5.csv
[Sun Jun  9 04:36:16 2013] fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Jun  9 04:36:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_src5.csv
[Sun Jun  9 04:36:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 04:36:17 2013] fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Jun  9 04:36:17 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Jun  9 04:36:17 2013] fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Jun  9 04:36:17 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Jun  9 04:36:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 04:36:32 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 16.587255 pixels away
[Sun Jun  9 04:36:32 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 04:36:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 04:36:32 2013] Assessing source extent using major
[Sun Jun  9 04:36:32 2013] Source does appear to be extended
[Sun Jun  9 04:36:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 04:37:06 2013] Using EEF radius (= 14.92 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 04:37:06 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  9 04:37:06 2013] Initial guess for spatial extent in simple fitting = 14.92"
[Sun Jun  9 04:37:06 2013] source mask rpix=3.4, npix_max = 61, mask sum = 46, frac = 0.744
[Sun Jun  9 04:37:06 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 14.92"
[Sun Jun  9 04:37:07 2013] fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_src5.ximg exists
[Sun Jun  9 04:37:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_src5.csv
[Sun Jun  9 04:37:07 2013] fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Jun  9 04:37:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_src5.csv
[Sun Jun  9 04:37:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 04:37:07 2013] fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Jun  9 04:37:07 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Jun  9 04:37:07 2013] fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Jun  9 04:37:07 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Jun  9 04:37:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 04:37:26 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 16.861089 pixels away
[Sun Jun  9 04:37:26 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 04:37:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 04:37:26 2013] Assessing source extent using major
[Sun Jun  9 04:37:26 2013] Source does appear to be extended
[Sun Jun  9 04:37:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 04:38:01 2013] XMMSAS src. selection expression = ellipse(14714.656326, 42948.661346, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  9 04:38:01 2013] Not overwriting source region fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src5_src.reg
[Sun Jun  9 04:38:01 2013] Extracting stamp from image fullrun_pn_xmm0112680401_pi300-10000_cl_sm2.00.img.gz, (132, 457) - (207, 532)
[Sun Jun  9 04:38:01 2013] XMMSAS bgd. selection expression = annulus(14714.656326, 42948.661346, 1087.500000, 2175.000000, X, Y) && !ellipse(16702.082489, 44197.340210, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 04:38:01 2013] Writing fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src5.gif
[Sun Jun  9 04:38:03 2013] ../../xmm0112680401/products/events/fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0112680401/products/events/fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create
[Sun Jun  9 04:38:03 2013] Mean detx,y = (-16028.09, -12181.04) 
[Sun Jun  9 04:38:03 2013] ../../xmm0112680401/products/images/fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src5_src.img and ../../xmm0112680401/products/images/fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create
[Sun Jun  9 04:38:03 2013] ../../xmm0112680401/products/spectra/fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src5_src_b10.pi.gz and ../../xmm0112680401/products/spectra/fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create
[Sun Jun  9 04:38:03 2013] Setting source spectrum file to fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jun  9 04:38:03 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jun  9 04:38:03 2013] ../../xmm0112680401/products/lightcurves/fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0112680401/products/lightcurves/fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create
[Sun Jun  9 04:38:21 2013] Not generating rmf since there are only 70 counts
[Sun Jun  9 04:38:21 2013] rmf not generated due to insufficient counts
[Sun Jun  9 04:38:21 2013] fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src5.arf exists, delete to re-create
[Sun Jun  9 04:56:05 2013] Updating aperture counts using extracted products
[Sun Jun  9 04:56:05 2013] Total counts from fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 129.00
[Sun Jun  9 04:56:06 2013] Total counts from fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src5_bgd.pi.gz = 344.00
[Sun Jun  9 04:56:06 2013] Got source and background scale factors 709624.000000, 4970806.000000
[Sun Jun  9 04:56:06 2013] User source parameters:
  Position = (169.7, 494.2) = 2 28 42.58 -4 16 53.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 79.9 +/- 12.4
  Background aperture counts = 49.1
  Rate = 0.004 +/- 0.0006

[Sun Jun  9 04:56:06 2013] Updating counts from extracted products
[Sun Jun  9 04:56:06 2013] Set source signif. to 79.89/7.01 = 11.40
[Sun Jun  9 04:56:23 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 04:56:23 2013] Using photon index=1.80, rate=0.00383, arf fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src5.arf
[Sun Jun  9 04:56:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 04:56:23 2013] Updating source flux to 8.1e-14
[Sun Jun  9 04:56:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  9 04:56:56 2013] xmm0112680401/analysis//spectral/fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete