[Sun Jun 9 04:35:33 2013] Detection parameters: Position = (320.5, 297.7) = 2 27 58.72 -4 31 12.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 190.0 +/- 18.4 Background counts = 24.4 Rate = 0.01 +/- 0.0009 [Sun Jun 9 04:35:34 2013] Off-axis axis estimate = 1.60' [Sun Jun 9 04:36:15 2013] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 04:36:15 2013] Initial guess for spatial extent in simple fitting = 7.23" [Sun Jun 9 04:36:15 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.070 [Sun Jun 9 04:36:15 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 7.23" [Sun Jun 9 04:36:16 2013] fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_src30.ximg exists [Sun Jun 9 04:36:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_src30.csv [Sun Jun 9 04:36:16 2013] fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_src30_1.ximg exists [Sun Jun 9 04:36:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_src30.csv [Sun Jun 9 04:36:17 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_src30_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 04:36:17 2013] fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src30.ximg exists [Sun Jun 9 04:36:17 2013] fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists [Sun Jun 9 04:36:17 2013] Fit fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly [Sun Jun 9 04:36:32 2013] Source 30 is offset by -6.129978 and -6.938786 pixels which is larger than 2 X fitted extent = 0.830970 x 0.830970, not incorporating fit results [Sun Jun 9 04:36:32 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 04:36:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 04:36:32 2013] Assessing source extent using major [Sun Jun 9 04:36:32 2013] Source does appear to be extended [Sun Jun 9 04:36:32 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 04:37:06 2013] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 04:37:06 2013] Initial guess for spatial extent in simple fitting = 7.23" [Sun Jun 9 04:37:06 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.070 [Sun Jun 9 04:37:06 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 7.23" [Sun Jun 9 04:37:07 2013] fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_src28.ximg exists [Sun Jun 9 04:37:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_src28.csv [Sun Jun 9 04:37:07 2013] fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_src28_1.ximg exists [Sun Jun 9 04:37:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_src28.csv [Sun Jun 9 04:37:07 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_src28_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 04:37:08 2013] fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src28.ximg exists [Sun Jun 9 04:37:08 2013] fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists [Sun Jun 9 04:37:08 2013] Fit fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly [Sun Jun 9 04:37:26 2013] Spatial fit model total counts = 361.925000, observed total counts = 362.000000 [Sun Jun 9 04:37:26 2013] Offset between fit and detection position for source 30 = 0.161081 pixels [Sun Jun 9 04:37:26 2013] 363.367000 total counts/ 243.414000 bgd. counts: snr = 7.688442 Spatial fit parameters: Offset between fit and detection position for source 30 = 0.161081 pixels Position = (320.5, 297.6) = 2 27 58.73 -4 31 12.4 Extent = 5.3 (4.4-6.4)", rotation angle = 0 Source counts = 120.0 +/- 19.1 Background counts = 243.4 Rate = 0.006 +/- 0.0009 [Sun Jun 9 04:37:26 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 04:37:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 04:37:26 2013] Assessing source extent using major axis lower bound [Sun Jun 9 04:37:26 2013] Source does appear to be extended [Sun Jun 9 04:37:26 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 04:38:02 2013] XMMSAS src. selection expression = ellipse(27833.131600, 25838.590400, 316.826409, 316.826409, 0.000000, X, Y) [Sun Jun 9 04:38:02 2013] Not overwriting source region fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src30_src.reg [Sun Jun 9 04:38:02 2013] Extracting stamp from image fullrun_pn_xmm0112680401_pi300-10000_cl_sm2.00.img.gz, (302, 279) - (339, 316) [Sun Jun 9 04:38:02 2013] XMMSAS bgd. selection expression = annulus(27833.131600, 25838.590400, 528.044015, 1056.088030, X, Y) && !ellipse(28906.949493, 24230.388855, 870.000000, 870.000000, 0.000000, X, Y) [Sun Jun 9 04:38:02 2013] Writing fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src30.gif [Sun Jun 9 04:38:05 2013] ../../xmm0112680401/products/events/fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src30_src.evt and ../../xmm0112680401/products/events/fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src30_bgd.evt exist, delete to re-create [Sun Jun 9 04:38:06 2013] Mean detx,y = (818.41, 1071.49) [Sun Jun 9 04:38:06 2013] ../../xmm0112680401/products/images/fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src30_src.img and ../../xmm0112680401/products/images/fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src30_bgd.img exist, delete to re-create [Sun Jun 9 04:38:06 2013] ../../xmm0112680401/products/spectra/fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src30_src_b10.pi.gz and ../../xmm0112680401/products/spectra/fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src30_bgd.pi exist, delete to re-create [Sun Jun 9 04:38:06 2013] Setting source spectrum file to fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src30_src_b10.pi.gz [Sun Jun 9 04:38:06 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src30_bgd.pi.gz [Sun Jun 9 04:38:06 2013] ../../xmm0112680401/products/lightcurves/fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src30_src.lc and ../../xmm0112680401/products/lightcurves/fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src30_bgd.lc exist, delete to re-create [Sun Jun 9 04:38:21 2013] fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src30.rmf exists, delete to re-create [Sun Jun 9 04:38:21 2013] fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src30.arf exists, delete to re-create [Sun Jun 9 04:56:16 2013] Updating aperture counts using extracted products [Sun Jun 9 04:56:16 2013] Total counts from fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 159.00 [Sun Jun 9 04:56:16 2013] Total counts from fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src30_bgd.pi.gz = 295.00 [Sun Jun 9 04:56:16 2013] Got source and background scale factors 320000.000000, 2641600.000000 [Sun Jun 9 04:56:16 2013] User source parameters: Position = (320.5, 297.6) = 2 27 58.73 -4 31 12.4 Extent = 5.3 (4.4-6.4)", rotation angle = 0 Source aperture counts = 123.3 +/- 13.6 Background aperture counts = 35.7 Rate = 0.006 +/- 0.0007 [Sun Jun 9 04:56:26 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 9 04:56:26 2013] Using photon index=1.80, rate=0.00576, arf fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src30.arf [Sun Jun 9 04:56:26 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 9 04:56:26 2013] Updating source flux to 1.8e-14 [Sun Jun 9 04:56:51 2013] Flag b found in src. 30 procflags, skipping spectral fitting [Sun Jun 9 04:56:56 2013] xmm0112680401/analysis//spectral/fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete