[Sun Jun 9 04:35:32 2013] Detection parameters: Position = (129.6, 404.0) = 2 28 54.24 -4 23 27.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 51.0 +/- 10.8 Background counts = 16.3 Rate = 0.002 +/- 0.0005 [Sun Jun 9 04:35:34 2013] Off-axis axis estimate = 14.44' [Sun Jun 9 04:36:15 2013] Using EEF radius (= 13.65 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 04:36:15 2013] Initial guess for spatial extent in simple fitting = 13.65" [Sun Jun 9 04:36:15 2013] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.058 [Sun Jun 9 04:36:15 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 13.65" [Sun Jun 9 04:36:16 2013] fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_src20.ximg exists [Sun Jun 9 04:36:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_src20.csv [Sun Jun 9 04:36:16 2013] fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_src20_1.ximg exists [Sun Jun 9 04:36:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_src20.csv [Sun Jun 9 04:36:16 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_src20_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 04:36:17 2013] fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src20.ximg exists [Sun Jun 9 04:36:17 2013] fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists [Sun Jun 9 04:36:17 2013] Fit fullrun_pn_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly [Sun Jun 9 04:36:32 2013] Spatial fit model total counts = 245.872000, observed total counts = 223.000000 [Sun Jun 9 04:36:32 2013] Poor agreement between spatial fit and data for source 20 It may help to tweak spatial fit manually Not incorporating fit results [Sun Jun 9 04:36:32 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 04:36:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 04:36:32 2013] Assessing source extent using major [Sun Jun 9 04:36:32 2013] Source does appear to be extended [Sun Jun 9 04:36:32 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 04:37:06 2013] Using EEF radius (= 13.65 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 04:37:06 2013] Initial guess for spatial extent in simple fitting = 13.65" [Sun Jun 9 04:37:06 2013] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.058 [Sun Jun 9 04:37:06 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 13.65" [Sun Jun 9 04:37:07 2013] fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_src19.ximg exists [Sun Jun 9 04:37:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_src19.csv [Sun Jun 9 04:37:07 2013] fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_src19_1.ximg exists [Sun Jun 9 04:37:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_src19.csv [Sun Jun 9 04:37:07 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_src19_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 04:37:08 2013] fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src19.ximg exists [Sun Jun 9 04:37:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src19.csv [Sun Jun 9 04:37:08 2013] fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists [Sun Jun 9 04:37:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src19.csv [Sun Jun 9 04:37:08 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 04:37:26 2013] Source 20 is offset by -5.977659 and -6.570006 pixels which is larger than 2 X fitted extent = 0.762625 x 0.762625, not incorporating fit results [Sun Jun 9 04:37:26 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 04:37:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 04:37:26 2013] Assessing source extent using major [Sun Jun 9 04:37:26 2013] Source does appear to be extended [Sun Jun 9 04:37:26 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 04:38:02 2013] XMMSAS src. selection expression = ellipse(11228.731628, 35102.197510, 652.500000, 652.500000, 0.000000, X, Y) [Sun Jun 9 04:38:02 2013] Not overwriting source region fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src20_src.reg [Sun Jun 9 04:38:02 2013] Extracting stamp from image fullrun_pn_xmm0112680401_pi300-10000_cl_sm2.00.img.gz, (92, 367) - (167, 442) [Sun Jun 9 04:38:02 2013] XMMSAS bgd. selection expression = annulus(11228.731628, 35102.197510, 1087.500000, 2175.000000, X, Y) [Sun Jun 9 04:38:02 2013] Writing fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src20.gif [Sun Jun 9 04:38:04 2013] ../../xmm0112680401/products/events/fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src20_src.evt and ../../xmm0112680401/products/events/fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src20_bgd.evt exist, delete to re-create [Sun Jun 9 04:38:04 2013] Mean detx,y = (-17579.51, -3763.57) [Sun Jun 9 04:38:04 2013] ../../xmm0112680401/products/images/fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src20_src.img and ../../xmm0112680401/products/images/fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src20_bgd.img exist, delete to re-create [Sun Jun 9 04:38:04 2013] ../../xmm0112680401/products/spectra/fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src20_src_b10.pi.gz and ../../xmm0112680401/products/spectra/fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src20_bgd.pi exist, delete to re-create [Sun Jun 9 04:38:04 2013] Setting source spectrum file to fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src20_src_b10.pi.gz [Sun Jun 9 04:38:04 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src20_bgd.pi.gz [Sun Jun 9 04:38:04 2013] ../../xmm0112680401/products/lightcurves/fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src20_src.lc and ../../xmm0112680401/products/lightcurves/fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src20_bgd.lc exist, delete to re-create [Sun Jun 9 04:38:21 2013] Not generating rmf since there are only 50 counts [Sun Jun 9 04:38:21 2013] rmf not generated due to insufficient counts [Sun Jun 9 04:38:21 2013] fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src20.arf exists, delete to re-create [Sun Jun 9 04:56:11 2013] Updating aperture counts using extracted products [Sun Jun 9 04:56:11 2013] Total counts from fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 136.00 [Sun Jun 9 04:56:11 2013] Total counts from fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src20_bgd.pi.gz = 525.00 [Sun Jun 9 04:56:11 2013] Got source and background scale factors 1339200.000000, 7105696.000000 [Sun Jun 9 04:56:11 2013] User source parameters: Position = (129.6, 404.0) = 2 28 54.24 -4 23 27.3 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 37.1 +/- 12.7 Background aperture counts = 98.9 Rate = 0.002 +/- 0.0006 [Sun Jun 9 04:56:11 2013] Updating counts from extracted products [Sun Jun 9 04:56:11 2013] Set source signif. to 37.05/9.95 = 3.73 [Sun Jun 9 04:56:25 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 9 04:56:25 2013] Using photon index=1.80, rate=0.00178, arf fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src20.arf [Sun Jun 9 04:56:25 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 9 04:56:25 2013] Updating source flux to 1.7e-14 [Sun Jun 9 04:56:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Jun 9 04:56:56 2013] xmm0112680401/analysis//spectral/fullrun_pn_xmm0112680401_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete