[Sun Jun  9 04:35:38 2013] Detection parameters:
  Position = (394.6, 306.5) = 2 27 37.15 -4 30 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.2 +/- 10.7
  Background counts = 5.5
  Rate = 0.004 +/- 0.0007

[Sun Jun  9 04:35:40 2013] Off-axis axis estimate = 7.00'
[Sun Jun  9 04:36:19 2013] Using EEF radius (= 9.93 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 04:36:19 2013] Initial guess for spatial extent in simple fitting = 9.93"
[Sun Jun  9 04:36:19 2013] source mask rpix=2.3, npix_max = 30, mask sum = 17, frac = 0.549
[Sun Jun  9 04:36:19 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 9.93"
[Sun Jun  9 04:36:20 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src6.ximg exists
[Sun Jun  9 04:36:20 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Jun  9 04:36:20 2013] Fit fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src6 appears to have run properly
[Sun Jun  9 04:36:20 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Jun  9 04:36:20 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Jun  9 04:36:20 2013] Fit fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Jun  9 04:36:47 2013] Spatial fit model total counts = 98.913000, observed total counts = 99.000000
[Sun Jun  9 04:36:47 2013] Offset between fit and detection position for source 7 = 0.279854 pixels
[Sun Jun  9 04:36:47 2013] 99.973400 total counts/ 58.831800 bgd. counts: snr = 5.363831
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.279854 pixels
  Position = (394.9, 306.5) = 2 27 37.07 -4 30 33.4
  Extent = 6.3 (4.1-8.7)" x 2.8 (2.5-4.2)", rotation angle = 30 (13-56) degrees
  Source counts = 41.1 +/- 10.0
  Background counts = 58.8
  Rate = 0.002 +/- 0.0004
[Sun Jun  9 04:36:47 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 04:36:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 04:36:47 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 04:36:47 2013] Source does appear to be extended
[Sun Jun  9 04:36:47 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.96
[Sun Jun  9 04:37:09 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 04:37:09 2013] Initial guess for spatial extent in simple fitting = 4.57"
[Sun Jun  9 04:37:09 2013] source mask rpix=1.1, npix_max = 9, mask sum = 6, frac = 0.624
[Sun Jun  9 04:37:09 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 4.57"
[Sun Jun  9 04:37:10 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src6.ximg exists
[Sun Jun  9 04:37:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src6.csv
[Sun Jun  9 04:37:10 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Jun  9 04:37:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src6.csv
[Sun Jun  9 04:37:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 04:37:11 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Jun  9 04:37:11 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Jun  9 04:37:11 2013] Fit fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sun Jun  9 04:37:42 2013] Spatial fit model total counts = 105.464000, observed total counts = 102.000000
[Sun Jun  9 04:37:42 2013] Offset between fit and detection position for source 7 = 0.065919 pixels
[Sun Jun  9 04:37:42 2013] 106.734100 total counts/ 65.796900 bgd. counts: snr = 5.046792
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.065919 pixels
  Position = (395.0, 306.6) = 2 27 37.06 -4 30 33.2
  Extent = 4.4 (3.0-5.7)", rotation angle = 0
  Source counts = 40.9 +/- 10.3
  Background counts = 65.8
  Rate = 0.002 +/- 0.0004
[Sun Jun  9 04:37:42 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 04:37:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 04:37:42 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 04:37:42 2013] Source does appear to be extended
[Sun Jun  9 04:37:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 04:38:32 2013] XMMSAS src. selection expression = ellipse(34314.672942, 26622.368600, 264.827408, 264.827408, 0.000000, X, Y)
[Sun Jun  9 04:38:32 2013] Not overwriting source region fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src7_src.reg
[Sun Jun  9 04:38:32 2013] Extracting stamp from image fullrun_mos2_xmm0112680401_pi300-10000_cl_sm2.00.img.gz, (380, 291) - (410, 322)
[Sun Jun  9 04:38:32 2013] XMMSAS bgd. selection expression = annulus(34314.672942, 26622.368600, 441.379013, 882.758025, X, Y) && !ellipse(36026.423828, 26254.317688, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 04:38:32 2013] Writing fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src7.gif
[Sun Jun  9 04:39:30 2013] Mean detx,y = (-6740.27, 1212.98) 
[Sun Jun  9 04:39:32 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 04:39:49 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 04:39:50 2013] Setting source spectrum file to fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Jun  9 04:39:50 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun Jun  9 04:52:54 2013] Not generating rmf since there are only 40 counts
[Sun Jun  9 04:52:54 2013] rmf not generated due to insufficient counts
[Sun Jun  9 04:56:38 2013] Updating aperture counts using extracted products
[Sun Jun  9 04:56:38 2013] Total counts from fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 48.00
[Sun Jun  9 04:56:38 2013] Total counts from fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src7_bgd.pi.gz = 57.00
[Sun Jun  9 04:56:38 2013] Got source and background scale factors 192384.000000, 1620440.000000
[Sun Jun  9 04:56:38 2013] User source parameters:
  Position = (395.0, 306.6) = 2 27 37.06 -4 30 33.2
  Extent = 4.4 (3.0-5.7)", rotation angle = 0
  Source aperture counts = 41.2 +/- 8.0
  Background aperture counts = 6.8
  Rate = 0.002 +/- 0.0003

[Sun Jun  9 04:56:43 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 04:56:43 2013] Using photon index=1.80, rate=0.00169, arf fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src7.arf
[Sun Jun  9 04:56:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 04:56:43 2013] Updating source flux to 4.1e-14
[Sun Jun  9 04:56:49 2013] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  9 04:56:51 2013] xmm0112680401/analysis//spectral/fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete