[Sun Jun  9 04:35:39 2013] Detection parameters:
  Position = (414.7, 302.3) = 2 27 31.33 -4 30 51.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.3 +/- 8.3
  Background counts = 6.7
  Rate = 0.002 +/- 0.0005

[Sun Jun  9 04:35:40 2013] Off-axis axis estimate = 8.43'
[Sun Jun  9 04:36:19 2013] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 04:36:19 2013] Initial guess for spatial extent in simple fitting = 10.64"
[Sun Jun  9 04:36:19 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.036
[Sun Jun  9 04:36:19 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 10.64"
[Sun Jun  9 04:36:20 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src15.ximg exists
[Sun Jun  9 04:36:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src15.csv
[Sun Jun  9 04:36:20 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun Jun  9 04:36:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src15.csv
[Sun Jun  9 04:36:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 04:36:20 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun Jun  9 04:36:20 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Jun  9 04:36:20 2013] Fit fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sun Jun  9 04:36:47 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 10.617424 pixels away
[Sun Jun  9 04:36:47 2013] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 13.883295 pixels away
[Sun Jun  9 04:36:47 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 04:36:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 04:36:47 2013] Assessing source extent using major
[Sun Jun  9 04:36:47 2013] Source does appear to be extended
[Sun Jun  9 04:36:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 04:37:09 2013] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 04:37:09 2013] Initial guess for spatial extent in simple fitting = 10.64"
[Sun Jun  9 04:37:09 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.036
[Sun Jun  9 04:37:09 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 10.64"
[Sun Jun  9 04:37:10 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src15.ximg exists
[Sun Jun  9 04:37:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src15.csv
[Sun Jun  9 04:37:11 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Jun  9 04:37:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src15.csv
[Sun Jun  9 04:37:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 04:37:11 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Jun  9 04:37:11 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Jun  9 04:37:11 2013] Fit fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Jun  9 04:37:42 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 10.617424 pixels away
[Sun Jun  9 04:37:42 2013] Warning, spatial fit 15 centroid is now closest to src. 10
[Sun Jun  9 04:37:42 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 04:37:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 04:37:42 2013] Assessing source extent using major
[Sun Jun  9 04:37:42 2013] Source does appear to be extended
[Sun Jun  9 04:37:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 04:38:32 2013] XMMSAS src. selection expression = ellipse(36026.423828, 26254.317688, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  9 04:38:32 2013] Not overwriting source region fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src21_src.reg
[Sun Jun  9 04:38:32 2013] Extracting stamp from image fullrun_mos2_xmm0112680401_pi300-10000_cl_sm2.00.img.gz, (377, 265) - (452, 340)
[Sun Jun  9 04:38:33 2013] XMMSAS bgd. selection expression = annulus(36026.423828, 26254.317688, 1087.500000, 2175.000000, X, Y) && !ellipse(36657.325165, 24376.338470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34314.672942, 26622.368600, 353.103210, 353.103210, 0.000000, X, Y) && !ellipse(38215.830017, 25450.247375, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 04:38:33 2013] Writing fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src21.gif
[Sun Jun  9 04:43:29 2013] Mean detx,y = (-8563.88, 1297.60) 
[Sun Jun  9 04:43:30 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 04:43:55 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 04:43:55 2013] Setting source spectrum file to fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sun Jun  9 04:43:55 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sun Jun  9 04:54:18 2013] Not generating rmf since there are only 38 counts
[Sun Jun  9 04:54:18 2013] rmf not generated due to insufficient counts
[Sun Jun  9 04:56:41 2013] Updating aperture counts using extracted products
[Sun Jun  9 04:56:41 2013] Total counts from fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 75.00
[Sun Jun  9 04:56:41 2013] Total counts from fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src21_bgd.pi.gz = 281.00
[Sun Jun  9 04:56:41 2013] Got source and background scale factors 1314180.000000, 7800987.000000
[Sun Jun  9 04:56:41 2013] User source parameters:
  Position = (414.7, 302.3) = 2 27 31.33 -4 30 51.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 27.7 +/- 9.7
  Background aperture counts = 47.3
  Rate = 0.001 +/- 0.0004

[Sun Jun  9 04:56:41 2013] Updating counts from extracted products
[Sun Jun  9 04:56:41 2013] Set source signif. to 27.66/6.88 = 4.02
[Sun Jun  9 04:56:44 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 04:56:44 2013] Using photon index=1.80, rate=0.00114, arf fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src21.arf
[Sun Jun  9 04:56:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 04:56:44 2013] Updating source flux to 1.7e-14
[Sun Jun  9 04:56:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  9 04:56:51 2013] xmm0112680401/analysis//spectral/fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete