[Sun Jun  9 04:35:37 2013] Detection parameters:
  Position = (474.0, 359.0) = 2 27 14.06 -4 26 46.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.0 +/- 10.4
  Background counts = 4.6
  Rate = 0.003 +/- 0.0004

[Sun Jun  9 04:35:40 2013] Off-axis axis estimate = 13.47'
[Sun Jun  9 04:36:19 2013] Using EEF radius (= 13.16 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 04:36:19 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  9 04:36:19 2013] Initial guess for spatial extent in simple fitting = 13.16"
[Sun Jun  9 04:36:19 2013] source mask rpix=3.0, npix_max = 49, mask sum = 62, frac = 1.247
[Sun Jun  9 04:36:19 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 13.16"
[Sun Jun  9 04:36:20 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src11.ximg exists
[Sun Jun  9 04:36:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src11.csv
[Sun Jun  9 04:36:20 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Jun  9 04:36:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src11.csv
[Sun Jun  9 04:36:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 04:36:20 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Jun  9 04:36:20 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Jun  9 04:36:20 2013] Fit fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Jun  9 04:36:47 2013] Spatial fit model total counts = 118.994000, observed total counts = 115.000000
[Sun Jun  9 04:36:47 2013] Offset between fit and detection position for source 2 = 0.478156 pixels
[Sun Jun  9 04:36:47 2013] 118.642000 total counts/ 82.283800 bgd. counts: snr = 4.008161
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.478156 pixels
  Position = (473.6, 359.1) = 2 27 14.20 -4 26 44.5
  Extent = 4.2 (3.3-5.8)", rotation angle = 0
  Source counts = 36.4 +/- 10.9
  Background counts = 82.3
  Rate = 0.001 +/- 0.0004
[Sun Jun  9 04:36:47 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 04:36:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 04:36:47 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 04:36:47 2013] Source does appear to be extended
[Sun Jun  9 04:36:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 04:37:09 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 04:37:09 2013] Initial guess for spatial extent in simple fitting = 4.21"
[Sun Jun  9 04:37:09 2013] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.043
[Sun Jun  9 04:37:09 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 4.21"
[Sun Jun  9 04:37:10 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src11.ximg exists
[Sun Jun  9 04:37:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src11.csv
[Sun Jun  9 04:37:10 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Jun  9 04:37:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src11.csv
[Sun Jun  9 04:37:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 04:37:11 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Jun  9 04:37:11 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Jun  9 04:37:11 2013] Fit fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sun Jun  9 04:37:42 2013] Spatial fit model total counts = 101.487000, observed total counts = 101.000000
[Sun Jun  9 04:37:42 2013] Offset between fit and detection position for source 2 = 0.037938 pixels
[Sun Jun  9 04:37:42 2013] 101.462500 total counts/ 66.633600 bgd. counts: snr = 4.266710
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.037938 pixels
  Position = (473.6, 359.1) = 2 27 14.19 -4 26 44.6
  Extent = 4.0 (3.0-5.6)", rotation angle = 0
  Source counts = 34.8 +/- 10.1
  Background counts = 66.6
  Rate = 0.001 +/- 0.0004
[Sun Jun  9 04:37:42 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 04:37:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 04:37:42 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 04:37:42 2013] Source does appear to be extended
[Sun Jun  9 04:37:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 04:38:32 2013] XMMSAS src. selection expression = ellipse(41153.286800, 31192.997200, 241.509607, 241.509607, 0.000000, X, Y)
[Sun Jun  9 04:38:32 2013] Not overwriting source region fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src2_src.reg
[Sun Jun  9 04:38:32 2013] Extracting stamp from image fullrun_mos2_xmm0112680401_pi300-10000_cl_sm2.00.img.gz, (460, 345) - (487, 373)
[Sun Jun  9 04:38:32 2013] XMMSAS bgd. selection expression = annulus(41153.286800, 31192.997200, 402.516012, 805.032023, X, Y) && !ellipse(41900.896515, 32237.736847, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 04:38:32 2013] Writing fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src2.gif
[Sun Jun  9 04:41:51 2013] Mean detx,y = (-12170.37, 7380.95) 
[Sun Jun  9 04:41:54 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 04:42:04 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 04:42:04 2013] Setting source spectrum file to fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun  9 04:42:04 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jun  9 04:53:38 2013] Not generating rmf since there are only 34 counts
[Sun Jun  9 04:53:38 2013] rmf not generated due to insufficient counts
[Sun Jun  9 04:56:40 2013] Updating aperture counts using extracted products
[Sun Jun  9 04:56:40 2013] Total counts from fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 43.00
[Sun Jun  9 04:56:40 2013] Total counts from fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src2_bgd.pi.gz = 37.00
[Sun Jun  9 04:56:40 2013] Got source and background scale factors 159948.000000, 1131584.000000
[Sun Jun  9 04:56:40 2013] User source parameters:
  Position = (473.6, 359.1) = 2 27 14.19 -4 26 44.6
  Extent = 4.0 (3.0-5.6)", rotation angle = 0
  Source aperture counts = 37.8 +/- 7.6
  Background aperture counts = 5.2
  Rate = 0.002 +/- 0.0003

[Sun Jun  9 04:56:43 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 04:56:43 2013] Using photon index=1.80, rate=0.00144, arf fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src2.arf
[Sun Jun  9 04:56:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 04:56:43 2013] Updating source flux to 6.7e-14
[Sun Jun  9 04:56:49 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  9 04:56:51 2013] xmm0112680401/analysis//spectral/fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete