[Sun Jun  9 04:35:39 2013] Detection parameters:
  Position = (395.8, 361.7) = 2 27 36.83 -4 26 34.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.0 +/- 7.9
  Background counts = 6.7
  Rate = 0.002 +/- 0.0005

[Sun Jun  9 04:35:40 2013] Off-axis axis estimate = 8.41'
[Sun Jun  9 04:36:19 2013] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 04:36:19 2013] Initial guess for spatial extent in simple fitting = 10.64"
[Sun Jun  9 04:36:19 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.038
[Sun Jun  9 04:36:19 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 10.64"
[Sun Jun  9 04:36:20 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src17.ximg exists
[Sun Jun  9 04:36:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src17.csv
[Sun Jun  9 04:36:20 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src17_1.ximg exists
[Sun Jun  9 04:36:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src17.csv
[Sun Jun  9 04:36:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 04:36:20 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sun Jun  9 04:36:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sun Jun  9 04:36:20 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sun Jun  9 04:36:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sun Jun  9 04:36:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 04:36:47 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 17.440905 pixels away
[Sun Jun  9 04:36:47 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 04:36:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 04:36:47 2013] Assessing source extent using major
[Sun Jun  9 04:36:47 2013] Source does appear to be extended
[Sun Jun  9 04:36:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 04:37:09 2013] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 04:37:09 2013] Initial guess for spatial extent in simple fitting = 10.64"
[Sun Jun  9 04:37:09 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.038
[Sun Jun  9 04:37:09 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 10.64"
[Sun Jun  9 04:37:11 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src17.ximg exists
[Sun Jun  9 04:37:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src17.csv
[Sun Jun  9 04:37:11 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src17_1.ximg exists
[Sun Jun  9 04:37:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src17.csv
[Sun Jun  9 04:37:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 04:37:11 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sun Jun  9 04:37:11 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sun Jun  9 04:37:11 2013] Fit fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sun Jun  9 04:37:42 2013] Spatial fit model total counts = 91.008800, observed total counts = 87.000000
[Sun Jun  9 04:37:42 2013] Offset between fit and detection position for source 18 = 0.397215 pixels
[Sun Jun  9 04:37:42 2013] 88.509600 total counts/ 51.712900 bgd. counts: snr = 5.116929
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.397215 pixels
  Position = (395.4, 361.9) = 2 27 36.93 -4 26 32.7
  Extent = 9.4 (4.6-19.4)", rotation angle = 0
  Source counts = 36.8 +/- 9.4
  Background counts = 51.7
  Rate = 0.002 +/- 0.0004
[Sun Jun  9 04:37:42 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 04:37:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 04:37:42 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 04:37:42 2013] Source does appear to be extended
[Sun Jun  9 04:37:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 04:38:33 2013] XMMSAS src. selection expression = ellipse(34352.225400, 31432.998360, 565.144816, 565.144816, 0.000000, X, Y)
[Sun Jun  9 04:38:33 2013] Not overwriting source region fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src18_src.reg
[Sun Jun  9 04:38:33 2013] Extracting stamp from image fullrun_mos2_xmm0112680401_pi300-10000_cl_sm2.00.img.gz, (363, 329) - (428, 394)
[Sun Jun  9 04:38:33 2013] XMMSAS bgd. selection expression = annulus(34352.225400, 31432.998360, 941.908027, 1883.816054, X, Y) && !ellipse(35253.167786, 32780.921326, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 04:38:33 2013] Writing fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src18.gif
[Sun Jun  9 04:44:19 2013] Mean detx,y = (-5511.98, 5842.38) 
[Sun Jun  9 04:44:21 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 04:45:05 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 04:45:05 2013] Setting source spectrum file to fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sun Jun  9 04:45:05 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sun Jun  9 04:54:29 2013] Not generating rmf since there are only 36 counts
[Sun Jun  9 04:54:29 2013] rmf not generated due to insufficient counts
[Sun Jun  9 04:56:41 2013] Updating aperture counts using extracted products
[Sun Jun  9 04:56:41 2013] Total counts from fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 66.00
[Sun Jun  9 04:56:41 2013] Total counts from fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src18_bgd.pi.gz = 200.00
[Sun Jun  9 04:56:41 2013] Got source and background scale factors 1006400.000000, 6004470.000000
[Sun Jun  9 04:56:41 2013] User source parameters:
  Position = (395.4, 361.9) = 2 27 36.93 -4 26 32.7
  Extent = 9.4 (4.6-19.4)", rotation angle = 0
  Source aperture counts = 32.5 +/- 9.2
  Background aperture counts = 33.5
  Rate = 0.001 +/- 0.0004

[Sun Jun  9 04:56:44 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 04:56:44 2013] Using photon index=1.80, rate=0.00152, arf fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src18.arf
[Sun Jun  9 04:56:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 04:56:44 2013] Updating source flux to 2.4e-14
[Sun Jun  9 04:56:49 2013] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  9 04:56:51 2013] xmm0112680401/analysis//spectral/fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete