[Sun Jun  9 04:35:38 2013] Detection parameters:
  Position = (398.8, 447.3) = 2 27 35.94 -4 20 21.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29.7 +/- 7.4
  Background counts = 5.7
  Rate = 0.001 +/- 0.0003

[Sun Jun  9 04:35:40 2013] Off-axis axis estimate = 13.02'
[Sun Jun  9 04:36:19 2013] Using EEF radius (= 12.94 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 04:36:19 2013] Initial guess for spatial extent in simple fitting = 12.94"
[Sun Jun  9 04:36:19 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.015
[Sun Jun  9 04:36:19 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 12.94"
[Sun Jun  9 04:36:20 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src28.ximg exists
[Sun Jun  9 04:36:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src28.csv
[Sun Jun  9 04:36:20 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src28_1.ximg exists
[Sun Jun  9 04:36:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src28.csv
[Sun Jun  9 04:36:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 04:36:21 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sun Jun  9 04:36:21 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sun Jun  9 04:36:21 2013] Fit fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Sun Jun  9 04:36:47 2013] Spatial fit model total counts = 92.156800, observed total counts = 92.000000
[Sun Jun  9 04:36:47 2013] Offset between fit and detection position for source 14 = 0.848621 pixels
[Sun Jun  9 04:36:47 2013] 93.585300 total counts/ 67.153400 bgd. counts: snr = 3.225480
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.848621 pixels
  Position = (398.0, 447.2) = 2 27 36.18 -4 20 21.6
  Extent = 8.1 (3.2-15.3)", rotation angle = 0
  Source counts = 26.4 +/- 9.7
  Background counts = 67.2
  Rate = 0.001 +/- 0.0004
[Sun Jun  9 04:36:47 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 04:36:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 04:36:47 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 04:36:47 2013] Source does appear to be extended
[Sun Jun  9 04:36:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 04:37:09 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 04:37:09 2013] Initial guess for spatial extent in simple fitting = 8.10"
[Sun Jun  9 04:37:09 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.896
[Sun Jun  9 04:37:09 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 8.10"
[Sun Jun  9 04:37:11 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src27.ximg exists
[Sun Jun  9 04:37:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src27.csv
[Sun Jun  9 04:37:11 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src27_1.ximg exists
[Sun Jun  9 04:37:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src27.csv
[Sun Jun  9 04:37:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 04:37:11 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sun Jun  9 04:37:11 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sun Jun  9 04:37:11 2013] Fit fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Sun Jun  9 04:37:42 2013] Spatial fit model total counts = 80.675200, observed total counts = 81.000000
[Sun Jun  9 04:37:42 2013] Offset between fit and detection position for source 14 = 0.470464 pixels
[Sun Jun  9 04:37:42 2013] 80.484000 total counts/ 58.917200 bgd. counts: snr = 2.809730
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.470464 pixels
  Position = (398.5, 447.3) = 2 27 36.05 -4 20 21.1
  Extent = 6.8 (2.2-13.2)", rotation angle = 0
  Source counts = 21.6 +/- 9.0
  Background counts = 58.9
  Rate = 0.0009 +/- 0.0004
[Sun Jun  9 04:37:42 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 04:37:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 04:37:42 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 04:37:42 2013] Source does appear to be extended
[Sun Jun  9 04:37:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 04:38:33 2013] XMMSAS src. selection expression = ellipse(34617.676800, 38864.073600, 406.747812, 406.747812, 0.000000, X, Y)
[Sun Jun  9 04:38:33 2013] Not overwriting source region fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src14_src.reg
[Sun Jun  9 04:38:33 2013] Extracting stamp from image fullrun_mos2_xmm0112680401_pi300-10000_cl_sm2.00.img.gz, (375, 424) - (422, 471)
[Sun Jun  9 04:38:33 2013] XMMSAS bgd. selection expression = annulus(34617.676800, 38864.073600, 677.913020, 1355.826039, X, Y)
[Sun Jun  9 04:38:33 2013] Writing fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src14.gif
[Sun Jun  9 04:48:19 2013] Mean detx,y = (-3882.86, 13094.14) 
[Sun Jun  9 04:48:21 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 04:48:30 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 04:48:30 2013] Setting source spectrum file to fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sun Jun  9 04:48:30 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sun Jun  9 04:55:27 2013] Not generating rmf since there are only 21 counts
[Sun Jun  9 04:55:27 2013] rmf not generated due to insufficient counts
[Sun Jun  9 04:56:43 2013] Updating aperture counts using extracted products
[Sun Jun  9 04:56:43 2013] Total counts from fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 37.00
[Sun Jun  9 04:56:43 2013] Total counts from fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src14_bgd.pi.gz = 123.00
[Sun Jun  9 04:56:43 2013] Got source and background scale factors 514380.000000, 4256100.000000
[Sun Jun  9 04:56:43 2013] User source parameters:
  Position = (398.5, 447.3) = 2 27 36.05 -4 20 21.1
  Extent = 6.8 (2.2-13.2)", rotation angle = 0
  Source aperture counts = 22.1 +/- 7.1
  Background aperture counts = 14.9
  Rate = 0.0009 +/- 0.0003

[Sun Jun  9 04:56:44 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 04:56:44 2013] Using photon index=1.80, rate=0.000889, arf fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src14.arf
[Sun Jun  9 04:56:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 04:56:44 2013] Updating source flux to 2.7e-14
[Sun Jun  9 04:56:49 2013] Source 14 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  9 04:56:51 2013] xmm0112680401/analysis//spectral/fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete