[Sun Jun  9 04:35:38 2013] Detection parameters:
  Position = (232.1, 477.7) = 2 28 24.43 -4 18 7.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.5 +/- 8.8
  Background counts = 4.8
  Rate = 0.002 +/- 0.0004

[Sun Jun  9 04:35:40 2013] Off-axis axis estimate = 13.86'
[Sun Jun  9 04:36:19 2013] Using EEF radius (= 13.36 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 04:36:19 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  9 04:36:19 2013] Initial guess for spatial extent in simple fitting = 13.36"
[Sun Jun  9 04:36:19 2013] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.961
[Sun Jun  9 04:36:19 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 13.36"
[Sun Jun  9 04:36:20 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src18.ximg exists
[Sun Jun  9 04:36:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src18.csv
[Sun Jun  9 04:36:20 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src18_1.ximg exists
[Sun Jun  9 04:36:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src18.csv
[Sun Jun  9 04:36:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 04:36:20 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sun Jun  9 04:36:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sun Jun  9 04:36:20 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sun Jun  9 04:36:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sun Jun  9 04:36:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112680401_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 04:36:47 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 16.291387 pixels away
[Sun Jun  9 04:36:47 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 04:36:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 04:36:47 2013] Assessing source extent using major
[Sun Jun  9 04:36:47 2013] Source does appear to be extended
[Sun Jun  9 04:36:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 04:37:09 2013] Using EEF radius (= 13.36 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 04:37:09 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  9 04:37:09 2013] Initial guess for spatial extent in simple fitting = 13.36"
[Sun Jun  9 04:37:09 2013] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.961
[Sun Jun  9 04:37:09 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 13.36"
[Sun Jun  9 04:37:11 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src18.ximg exists
[Sun Jun  9 04:37:11 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src18_1.ximg exists
[Sun Jun  9 04:37:11 2013] Fit fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_src18 appears to have run properly
[Sun Jun  9 04:37:11 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sun Jun  9 04:37:11 2013] fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sun Jun  9 04:37:11 2013] Fit fullrun_mos2_xmm0112680401_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Sun Jun  9 04:37:42 2013] Spatial fit model total counts = 114.492000, observed total counts = 106.000000
[Sun Jun  9 04:37:42 2013] Offset between fit and detection position for source 13 = 0.010750 pixels
[Sun Jun  9 04:37:42 2013] 113.976000 total counts/ 84.833200 bgd. counts: snr = 3.164087
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.010750 pixels
  Position = (232.1, 477.7) = 2 28 24.43 -4 18 9.0
  Extent = 6.9 (4.7-10.6)", rotation angle = 348 (323-6) degrees
  Source counts = 29.1 +/- 10.7
  Background counts = 84.8
  Rate = 0.001 +/- 0.0004
[Sun Jun  9 04:37:42 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 04:37:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 04:37:42 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 04:37:42 2013] Source does appear to be extended
[Sun Jun  9 04:37:42 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.02
[Sun Jun  9 04:38:33 2013] XMMSAS src. selection expression = ellipse(20145.046800, 41508.244600, 415.744812, 200.346006, 348.360421, X, Y)
[Sun Jun  9 04:38:33 2013] Not overwriting source region fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src13_src.reg
[Sun Jun  9 04:38:33 2013] Extracting stamp from image fullrun_mos2_xmm0112680401_pi300-10000_cl_sm2.00.img.gz, (208, 454) - (256, 502)
[Sun Jun  9 04:38:33 2013] XMMSAS bgd. selection expression = annulus(20145.046800, 41508.244600, 692.908020, 1385.816040, X, Y)
[Sun Jun  9 04:38:33 2013] Writing fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src13.gif
[Sun Jun  9 04:45:10 2013] Mean detx,y = (10774.03, 11945.47) 
[Sun Jun  9 04:45:12 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 04:45:34 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 04:45:35 2013] Setting source spectrum file to fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Jun  9 04:45:35 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sun Jun  9 04:54:34 2013] Not generating rmf since there are only 29 counts
[Sun Jun  9 04:54:34 2013] rmf not generated due to insufficient counts
[Sun Jun  9 04:56:42 2013] Updating aperture counts using extracted products
[Sun Jun  9 04:56:42 2013] Total counts from fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 38.00
[Sun Jun  9 04:56:42 2013] Total counts from fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src13_bgd.pi.gz = 83.00
[Sun Jun  9 04:56:42 2013] Got source and background scale factors 260800.000000, 3225878.000000
[Sun Jun  9 04:56:42 2013] User source parameters:
  Position = (232.1, 477.7) = 2 28 24.43 -4 18 9.0
  Extent = 6.9 (4.7-10.6)", rotation angle = 348 (323-6) degrees
  Source aperture counts = 31.3 +/- 7.2
  Background aperture counts = 6.7
  Rate = 0.001 +/- 0.0003

[Sun Jun  9 04:56:44 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 04:56:44 2013] Using photon index=1.80, rate=0.0012, arf fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src13.arf
[Sun Jun  9 04:56:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 04:56:44 2013] Updating source flux to 5.5e-14
[Sun Jun  9 04:56:49 2013] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  9 04:56:51 2013] xmm0112680401/analysis//spectral/fullrun_mos2_xmm0112680401_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete