[Fri Sep  7 10:13:55 2012] Detection parameters:
  Position = (439.5, 266.1) = 2 24 4.54 -4 13 21.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26.2 +/- 7.2
  Background counts = 6.6
  Rate = 0.002 +/- 0.0006

[Fri Sep  7 10:13:55 2012] Off-axis axis estimate = 10.49'
[Fri Sep  7 12:09:23 2012] Using EEF radius (= 11.67 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 12:09:23 2012] Initial guess for spatial extent in simple fitting = 11.67"
[Fri Sep  7 12:09:23 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.036
[Fri Sep  7 12:09:23 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 11.67"
[Fri Sep  7 12:41:50 2012] fullrun_mos2_xmm0112680301_pi300-10000_cl_pass0_src22.ximg exists
[Fri Sep  7 12:41:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680301_pi300-10000_cl_pass0_src22.csv
[Fri Sep  7 12:41:50 2012] fullrun_mos2_xmm0112680301_pi300-10000_cl_pass0_src22_1.ximg exists
[Fri Sep  7 12:41:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680301_pi300-10000_cl_pass0_src22.csv
[Fri Sep  7 12:41:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112680301_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112680301_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 12:41:50 2012] fullrun_mos2_xmm0112680301_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Fri Sep  7 12:41:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680301_pi300-10000_cl_pass0_tfrozen_src22.csv
[Fri Sep  7 12:41:50 2012] fullrun_mos2_xmm0112680301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Fri Sep  7 12:41:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112680301_pi300-10000_cl_pass0_tfrozen_src22.csv
[Fri Sep  7 12:41:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112680301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112680301_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 12:42:11 2012] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 14.226467 pixels away
[Fri Sep  7 12:42:11 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 12:42:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 12:42:11 2012] Assessing source extent using major
[Fri Sep  7 12:42:11 2012] Source does appear to be extended
[Fri Sep  7 12:42:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 14:09:01 2012] Using EEF radius (= 11.67 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 14:09:01 2012] Initial guess for spatial extent in simple fitting = 11.67"
[Fri Sep  7 14:09:01 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.036
[Fri Sep  7 14:09:01 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 11.67"
[Fri Sep  7 14:40:10 2012] fullrun_mos2_xmm0112680301_pi300-10000_cl_pass1_src22.ximg exists
[Fri Sep  7 14:40:10 2012] fullrun_mos2_xmm0112680301_pi300-10000_cl_pass1_src22_1.ximg exists
[Fri Sep  7 14:40:10 2012] Fit fullrun_mos2_xmm0112680301_pi300-10000_cl_pass1_src22 appears to have run properly
[Fri Sep  7 14:40:10 2012] fullrun_mos2_xmm0112680301_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Fri Sep  7 14:40:10 2012] fullrun_mos2_xmm0112680301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Fri Sep  7 14:40:10 2012] Fit fullrun_mos2_xmm0112680301_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Fri Sep  7 14:40:24 2012] Spatial fit model total counts = 160.537000, observed total counts = 146.000000
[Fri Sep  7 14:40:24 2012] Offset between fit and detection position for source 27 = 1.074158 pixels
[Fri Sep  7 14:40:24 2012] 161.024100 total counts/ 31.553100 bgd. counts: snr = 23.048968
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 1.074158 pixels
  Position = (439.7, 265.1) = 2 24 4.48 -4 13 26.6
  Extent = 23.3 (23.3-46.7)", rotation angle = 0
  Source counts = 129.5 +/- 12.7
  Background counts = 31.6
  Rate = 0.006 +/- 0.0006
[Fri Sep  7 14:40:24 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 14:40:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 14:40:24 2012] Assessing source extent using major axis lower bound
[Fri Sep  7 14:40:24 2012] Source does appear to be extended
[Fri Sep  7 14:40:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 15:02:56 2012] XMMSAS src. selection expression = ellipse(38204.938800, 23014.504000, 1400.934040, 1400.934040, 0.000000, X, Y)
[Fri Sep  7 15:02:56 2012] Writing source region out to fullrun_mos2_xmm0112680301_pi300-10000_pass1_cl_src27_src.reg
[Fri Sep  7 15:02:56 2012] Extracting stamp from image fullrun_mos2_xmm0112680301_pi300-10000_cl_sm2.00.img.gz, (359, 185) - (520, 346)
[Fri Sep  7 15:02:57 2012] XMMSAS bgd. selection expression = annulus(38204.938800, 23014.504000, 2334.890067, 4669.780134, X, Y) && !ellipse(34836.272220, 21981.903000, 485.716014, 302.066409, 119.276604, X, Y) && !ellipse(40593.546814, 25789.111420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33355.761719, 24233.630646, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Sep  7 15:02:57 2012] Writing fullrun_mos2_xmm0112680301_pi300-10000_pass1_cl_src27.gif
[Fri Sep  7 15:06:17 2012] Mean detx,y = (-11352.60, 51.17) 
[Fri Sep  7 15:06:17 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Sep  7 15:06:27 2012] grppha failed
[Fri Sep  7 15:06:27 2012] Setting source spectrum file to fullrun_mos2_xmm0112680301_pi300-10000_pass1_cl_src27_src.pi.gz
[Fri Sep  7 15:06:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112680301_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Fri Sep  7 15:08:16 2012] Updating aperture counts using extracted products
[Fri Sep  7 15:08:16 2012] Error reading totcts from fullrun_mos2_xmm0112680301_pi300-10000_pass1_cl_src27_src.pi.gz
[Fri Sep  7 15:08:16 2012] No arf file for this source, not re-computing flux
[Fri Sep  7 15:08:18 2012] Source 27 has no response, skipping
[Fri Sep  7 15:08:19 2012] xmm0112680301/analysis//spectral/fullrun_mos2_xmm0112680301_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete