[Fri Sep  7 10:13:40 2012] Detection parameters:
  Position = (319.0, 119.2) = 2 24 39.56 -4 24 1.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.6 +/- 12.3
  Background counts = 3.8
  Rate = 0.004 +/- 0.0005

[Fri Sep  7 10:13:40 2012] Off-axis axis estimate = 13.08'
[Fri Sep  7 11:27:27 2012] Using EEF radius (= 12.97 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 11:27:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep  7 11:27:27 2012] Initial guess for spatial extent in simple fitting = 12.97"
[Fri Sep  7 11:27:27 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.011
[Fri Sep  7 11:27:27 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 12.97"
[Fri Sep  7 12:09:22 2012] fullrun_mos1_xmm0112680301_pi300-10000_cl_pass0_src8.ximg exists
[Fri Sep  7 12:09:22 2012] fullrun_mos1_xmm0112680301_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri Sep  7 12:09:22 2012] Fit fullrun_mos1_xmm0112680301_pi300-10000_cl_pass0_src8 appears to have run properly
[Fri Sep  7 12:09:23 2012] fullrun_mos1_xmm0112680301_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri Sep  7 12:09:23 2012] fullrun_mos1_xmm0112680301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Sep  7 12:09:23 2012] Fit fullrun_mos1_xmm0112680301_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Fri Sep  7 12:42:05 2012] Spatial fit model total counts = 139.152000, observed total counts = 131.000000
[Fri Sep  7 12:42:05 2012] Offset between fit and detection position for source 30 = 0.397513 pixels
[Fri Sep  7 12:42:05 2012] 138.816400 total counts/ 64.511100 bgd. counts: snr = 9.251296
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.397513 pixels
  Position = (319.4, 119.4) = 2 24 39.46 -4 24 0.5
  Extent = 10.4 (8.1-13.9)" x 4.2 (3.3-5.8)", rotation angle = 185 (356-0) degrees
  Source counts = 74.3 +/- 11.8
  Background counts = 64.5
  Rate = 0.003 +/- 0.0005
[Fri Sep  7 12:42:05 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 12:42:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 12:42:05 2012] Assessing source extent using major axis lower bound
[Fri Sep  7 12:42:05 2012] Source does appear to be extended
[Fri Sep  7 12:42:05 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.40
[Fri Sep  7 13:39:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep  7 13:39:09 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Fri Sep  7 13:39:09 2012] source mask rpix=1.7, npix_max = 18, mask sum = 25, frac = 1.321
[Fri Sep  7 13:39:09 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 7.29"
[Fri Sep  7 14:09:00 2012] fullrun_mos1_xmm0112680301_pi300-10000_cl_pass1_src8.ximg exists
[Fri Sep  7 14:09:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112680301_pi300-10000_cl_pass1_src8.csv
[Fri Sep  7 14:09:00 2012] fullrun_mos1_xmm0112680301_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri Sep  7 14:09:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112680301_pi300-10000_cl_pass1_src8.csv
[Fri Sep  7 14:09:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112680301_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112680301_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 14:09:01 2012] fullrun_mos1_xmm0112680301_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri Sep  7 14:09:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112680301_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri Sep  7 14:09:01 2012] fullrun_mos1_xmm0112680301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Sep  7 14:09:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112680301_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri Sep  7 14:09:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112680301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112680301_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 14:40:21 2012] Warning, spatial fit 8 centroid is now closest to src. 28
[Fri Sep  7 14:40:21 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 14:40:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 14:40:21 2012] Assessing source extent using major axis lower bound
[Fri Sep  7 14:40:21 2012] Source does appear to be extended
[Fri Sep  7 14:40:21 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.40
[Fri Sep  7 14:58:27 2012] XMMSAS src. selection expression = ellipse(27739.459000, 10336.518600, 622.518018, 251.697007, 184.587315, X, Y)
[Fri Sep  7 14:58:27 2012] Writing source region out to fullrun_mos1_xmm0112680301_pi300-10000_pass1_cl_src30_src.reg
[Fri Sep  7 14:58:27 2012] Extracting stamp from image fullrun_mos1_xmm0112680301_pi300-10000_cl_sm2.00.img.gz, (284, 84) - (355, 155)
[Fri Sep  7 14:58:27 2012] XMMSAS bgd. selection expression = annulus(27739.459000, 10336.518600, 1037.530030, 2075.060060, X, Y)
[Fri Sep  7 14:58:27 2012] Writing fullrun_mos1_xmm0112680301_pi300-10000_pass1_cl_src30.gif
[Fri Sep  7 14:59:47 2012] Mean detx,y = (-15341.97, 5839.01) 
[Fri Sep  7 14:59:48 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Sep  7 14:59:57 2012] grppha failed
[Fri Sep  7 14:59:57 2012] Setting source spectrum file to fullrun_mos1_xmm0112680301_pi300-10000_pass1_cl_src30_src.pi.gz
[Fri Sep  7 14:59:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112680301_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Fri Sep  7 15:02:55 2012] Not generating rmf since there are only 74 counts
[Fri Sep  7 15:02:55 2012] rmf not generated due to insufficient counts
[Fri Sep  7 15:08:16 2012] Updating aperture counts using extracted products
[Fri Sep  7 15:08:16 2012] Error reading totcts from fullrun_mos1_xmm0112680301_pi300-10000_pass1_cl_src30_src.pi.gz
[Fri Sep  7 15:08:16 2012] No arf file for this source, not re-computing flux
[Fri Sep  7 15:08:17 2012] Source 30 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep  7 15:08:18 2012] xmm0112680301/analysis//spectral/fullrun_mos1_xmm0112680301_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete