[Fri Sep  7 10:13:40 2012] Detection parameters:
  Position = (324.4, 239.5) = 2 24 38.00 -4 15 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.6 +/- 7.6
  Background counts = 5.2
  Rate = 0.002 +/- 0.0005

[Fri Sep  7 10:13:40 2012] Off-axis axis estimate = 4.67'
[Fri Sep  7 11:27:27 2012] Using EEF radius (= 8.76 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 11:27:27 2012] Initial guess for spatial extent in simple fitting = 8.76"
[Fri Sep  7 11:27:27 2012] source mask rpix=2.0, npix_max = 25, mask sum = 17, frac = 0.672
[Fri Sep  7 11:27:27 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 8.76"
[Fri Sep  7 12:09:22 2012] fullrun_mos1_xmm0112680301_pi300-10000_cl_pass0_src20.ximg exists
[Fri Sep  7 12:09:22 2012] fullrun_mos1_xmm0112680301_pi300-10000_cl_pass0_src20_1.ximg exists
[Fri Sep  7 12:09:22 2012] Fit fullrun_mos1_xmm0112680301_pi300-10000_cl_pass0_src20 appears to have run properly
[Fri Sep  7 12:09:23 2012] fullrun_mos1_xmm0112680301_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Fri Sep  7 12:09:23 2012] fullrun_mos1_xmm0112680301_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Fri Sep  7 12:09:23 2012] Fit fullrun_mos1_xmm0112680301_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Fri Sep  7 12:42:05 2012] Spatial fit model total counts = 102.718000, observed total counts = 108.000000
[Fri Sep  7 12:42:05 2012] Offset between fit and detection position for source 25 = 0.462852 pixels
[Fri Sep  7 12:42:05 2012] 101.599800 total counts/ 85.126900 bgd. counts: snr = 1.785405
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.462852 pixels
  Position = (324.4, 239.0) = 2 24 38.01 -4 15 20.1
  Extent = 2.8 (2.2-4.5)", rotation angle = 0
  Source counts = 16.5 +/- 10.1
  Background counts = 85.1
  Rate = 0.0007 +/- 0.0004
[Fri Sep  7 12:42:05 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 12:42:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 12:42:05 2012] Assessing source extent using major axis lower bound
[Fri Sep  7 12:42:05 2012] Source does appear to be extended
[Fri Sep  7 12:42:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 13:39:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep  7 13:39:09 2012] Initial guess for spatial extent in simple fitting = 2.83"
[Fri Sep  7 13:39:09 2012] source mask rpix=0.7, npix_max = 5, mask sum = 4, frac = 0.754
[Fri Sep  7 13:39:09 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 2.83"
[Fri Sep  7 14:09:00 2012] fullrun_mos1_xmm0112680301_pi300-10000_cl_pass1_src20.ximg exists
[Fri Sep  7 14:09:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112680301_pi300-10000_cl_pass1_src20.csv
[Fri Sep  7 14:09:00 2012] fullrun_mos1_xmm0112680301_pi300-10000_cl_pass1_src20_1.ximg exists
[Fri Sep  7 14:09:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112680301_pi300-10000_cl_pass1_src20.csv
[Fri Sep  7 14:09:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112680301_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112680301_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 14:09:01 2012] fullrun_mos1_xmm0112680301_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Fri Sep  7 14:09:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112680301_pi300-10000_cl_pass1_tfrozen_src20.csv
[Fri Sep  7 14:09:01 2012] fullrun_mos1_xmm0112680301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Fri Sep  7 14:09:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112680301_pi300-10000_cl_pass1_tfrozen_src20.csv
[Fri Sep  7 14:09:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112680301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112680301_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 14:40:21 2012] Spatial fit model total counts = 276.278000, observed total counts = 108.000000
[Fri Sep  7 14:40:21 2012] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Sep  7 14:40:21 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 14:40:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 14:40:21 2012] Assessing source extent using major axis lower bound
[Fri Sep  7 14:40:21 2012] Source does appear to be extended
[Fri Sep  7 14:40:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 14:58:27 2012] XMMSAS src. selection expression = ellipse(28173.246000, 20744.976200, 170.088605, 170.088605, 0.000000, X, Y)
[Fri Sep  7 14:58:27 2012] Writing source region out to fullrun_mos1_xmm0112680301_pi300-10000_pass1_cl_src25_src.reg
[Fri Sep  7 14:58:27 2012] Extracting stamp from image fullrun_mos1_xmm0112680301_pi300-10000_cl_sm2.00.img.gz, (315, 229) - (334, 249)
[Fri Sep  7 14:58:27 2012] XMMSAS bgd. selection expression = annulus(28173.246000, 20744.976200, 283.481008, 566.962016, X, Y)
[Fri Sep  7 14:58:27 2012] Writing fullrun_mos1_xmm0112680301_pi300-10000_pass1_cl_src25.gif
[Fri Sep  7 15:01:35 2012] Mean detx,y = (-5454.47, 2576.00) 
[Fri Sep  7 15:01:36 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Sep  7 15:01:40 2012] grppha failed
[Fri Sep  7 15:01:40 2012] Setting source spectrum file to fullrun_mos1_xmm0112680301_pi300-10000_pass1_cl_src25_src.pi.gz
[Fri Sep  7 15:01:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112680301_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Fri Sep  7 15:02:56 2012] Not generating rmf since there are only 16 counts
[Fri Sep  7 15:02:56 2012] rmf not generated due to insufficient counts
[Fri Sep  7 15:08:16 2012] Updating aperture counts using extracted products
[Fri Sep  7 15:08:16 2012] Error reading totcts from fullrun_mos1_xmm0112680301_pi300-10000_pass1_cl_src25_src.pi.gz
[Fri Sep  7 15:08:16 2012] No arf file for this source, not re-computing flux
[Fri Sep  7 15:08:17 2012] Flag p found in src. 25 procflags, skipping spectral fitting
[Fri Sep  7 15:08:17 2012] Source 25 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep  7 15:08:18 2012] xmm0112680301/analysis//spectral/fullrun_mos1_xmm0112680301_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete