[Mon Jun 24 09:33:15 2013] Detection parameters:
  Position = (217.2, 443.1) = 2 26 17.83 -3 58 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.6 +/- 14.9
  Background counts = 44.6
  Rate = 0.004 +/- 0.0008

[Mon Jun 24 09:33:15 2013] Off-axis axis estimate = 12.03'
[Mon Jun 24 09:35:07 2013] Using EEF radius (= 12.44 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 09:35:07 2013] Initial guess for spatial extent in simple fitting = 12.44"
[Mon Jun 24 09:35:07 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.930
[Mon Jun 24 09:35:07 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 12.44"
[Mon Jun 24 10:23:29 2013] fullrun_pn_xmm0112680201_pi300-10000_cl_pass0_src26.ximg exists
[Mon Jun 24 10:23:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680201_pi300-10000_cl_pass0_src26.csv
[Mon Jun 24 10:23:29 2013] fullrun_pn_xmm0112680201_pi300-10000_cl_pass0_src26_1.ximg exists
[Mon Jun 24 10:23:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680201_pi300-10000_cl_pass0_src26.csv
[Mon Jun 24 10:23:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112680201_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112680201_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 10:23:29 2013] fullrun_pn_xmm0112680201_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Mon Jun 24 10:23:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon Jun 24 10:23:29 2013] fullrun_pn_xmm0112680201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Mon Jun 24 10:23:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon Jun 24 10:23:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112680201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112680201_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 11:02:13 2013] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 13.350547 pixels away
[Mon Jun 24 11:02:13 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 11:02:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 11:02:13 2013] Assessing source extent using major
[Mon Jun 24 11:02:13 2013] Source does appear to be extended
[Mon Jun 24 11:02:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 11:02:24 2013] Using EEF radius (= 12.44 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 11:02:24 2013] Initial guess for spatial extent in simple fitting = 12.44"
[Mon Jun 24 11:02:24 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.930
[Mon Jun 24 11:02:24 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 12.44"
[Mon Jun 24 11:37:43 2013] fullrun_pn_xmm0112680201_pi300-10000_cl_pass1_src25.ximg exists
[Mon Jun 24 11:37:43 2013] fullrun_pn_xmm0112680201_pi300-10000_cl_pass1_src25_1.ximg exists
[Mon Jun 24 11:37:43 2013] Fit fullrun_pn_xmm0112680201_pi300-10000_cl_pass1_src25 appears to have run properly
[Mon Jun 24 11:37:44 2013] fullrun_pn_xmm0112680201_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Mon Jun 24 11:37:44 2013] fullrun_pn_xmm0112680201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Mon Jun 24 11:37:44 2013] Fit fullrun_pn_xmm0112680201_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Mon Jun 24 12:10:03 2013] Spatial fit model total counts = 136.006000, observed total counts = 135.000000
[Mon Jun 24 12:10:03 2013] Offset between fit and detection position for source 27 = 0.374738 pixels
[Mon Jun 24 12:10:03 2013] 136.152800 total counts/ 104.310000 bgd. counts: snr = 3.117800
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.374738 pixels
  Position = (216.8, 443.2) = 2 26 17.93 -3 58 35.8
  Extent = 13.5 (7.3-24.3)", rotation angle = 336 (324-347) degrees
  Source counts = 31.8 +/- 11.7
  Background counts = 104.3
  Rate = 0.004 +/- 0.001
[Mon Jun 24 12:10:03 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 12:10:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 12:10:03 2013] Assessing source extent using major axis lower bound
[Mon Jun 24 12:10:03 2013] Source does appear to be extended
[Mon Jun 24 12:10:03 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.29
[Mon Jun 24 12:10:14 2013] XMMSAS src. selection expression = ellipse(18814.583600, 38513.889400, 812.268023, 186.651005, 336.309152, X, Y)
[Mon Jun 24 12:10:14 2013] Writing source region out to fullrun_pn_xmm0112680201_pi300-10000_pass1_cl_src27_src.reg
[Mon Jun 24 12:10:14 2013] Extracting stamp from image fullrun_pn_xmm0112680201_pi300-10000_cl_sm2.00.img.gz, (170, 397) - (263, 490)
[Mon Jun 24 12:10:14 2013] XMMSAS bgd. selection expression = annulus(18814.583600, 38513.889400, 1353.780039, 2707.560078, X, Y)
[Mon Jun 24 12:10:14 2013] Writing fullrun_pn_xmm0112680201_pi300-10000_pass1_cl_src27.gif
[Mon Jun 24 12:22:40 2013] Mean detx,y = (10425.51, 10331.32) 
[Mon Jun 24 12:22:42 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 24 12:23:07 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 24 12:23:07 2013] Setting source spectrum file to fullrun_pn_xmm0112680201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Mon Jun 24 12:23:07 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112680201_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Mon Jun 24 12:26:57 2013] Not generating rmf since there are only 31 counts
[Mon Jun 24 12:26:57 2013] rmf not generated due to insufficient counts
[Mon Jun 24 12:42:42 2013] Updating aperture counts using extracted products
[Mon Jun 24 12:42:42 2013] Total counts from fullrun_pn_xmm0112680201_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 47.00
[Mon Jun 24 12:42:42 2013] Total counts from fullrun_pn_xmm0112680201_pi300-10000_pass1_cl_src27_bgd.pi.gz = 497.00
[Mon Jun 24 12:42:42 2013] Got source and background scale factors 374052.000000, 9223995.000000
[Mon Jun 24 12:42:42 2013] User source parameters:
  Position = (216.8, 443.2) = 2 26 17.93 -3 58 35.8
  Extent = 13.5 (7.3-24.3)", rotation angle = 336 (324-347) degrees
  Source aperture counts = 26.8 +/- 7.9
  Background aperture counts = 20.2
  Rate = 0.003 +/- 0.0009

[Mon Jun 24 12:42:43 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 24 12:42:43 2013] Using photon index=1.80, rate=0.00358, arf fullrun_pn_xmm0112680201_pi300-10000_pass1_cl_src27.arf
[Mon Jun 24 12:42:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 24 12:42:43 2013] Getting flux using calc_pl_flux failed
[Mon Jun 24 12:42:50 2013] Source 27 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 24 12:42:51 2013] xmm0112680201/analysis//spectral/fullrun_pn_xmm0112680201_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete