[Mon Jun 24 09:33:15 2013] Detection parameters:
  Position = (339.3, 386.4) = 2 25 42.31 -4 2 42.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.9 +/- 16.1
  Background counts = 57.9
  Rate = 0.01 +/- 0.002

[Mon Jun 24 09:33:15 2013] Off-axis axis estimate = 7.03'
[Mon Jun 24 09:35:07 2013] Using EEF radius (= 9.95 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 09:35:07 2013] Initial guess for spatial extent in simple fitting = 9.95"
[Mon Jun 24 09:35:07 2013] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.805
[Mon Jun 24 09:35:07 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 9.95"
[Mon Jun 24 10:23:29 2013] fullrun_pn_xmm0112680201_pi300-10000_cl_pass0_src17.ximg exists
[Mon Jun 24 10:23:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680201_pi300-10000_cl_pass0_src17.csv
[Mon Jun 24 10:23:29 2013] fullrun_pn_xmm0112680201_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon Jun 24 10:23:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680201_pi300-10000_cl_pass0_src17.csv
[Mon Jun 24 10:23:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112680201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112680201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 10:23:29 2013] fullrun_pn_xmm0112680201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon Jun 24 10:23:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Mon Jun 24 10:23:29 2013] fullrun_pn_xmm0112680201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Jun 24 10:23:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112680201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Mon Jun 24 10:23:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112680201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112680201_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 11:02:13 2013] Warning, spatial fit 17 centroid is now closest to src. 21
[Mon Jun 24 11:02:13 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 11:02:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 11:02:13 2013] Assessing source extent using major
[Mon Jun 24 11:02:13 2013] Source does appear to be extended
[Mon Jun 24 11:02:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 11:02:24 2013] Using EEF radius (= 9.95 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 11:02:24 2013] Initial guess for spatial extent in simple fitting = 9.95"
[Mon Jun 24 11:02:24 2013] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.805
[Mon Jun 24 11:02:24 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 9.95"
[Mon Jun 24 11:37:43 2013] fullrun_pn_xmm0112680201_pi300-10000_cl_pass1_src17.ximg exists
[Mon Jun 24 11:37:43 2013] fullrun_pn_xmm0112680201_pi300-10000_cl_pass1_src17_1.ximg exists
[Mon Jun 24 11:37:43 2013] Fit fullrun_pn_xmm0112680201_pi300-10000_cl_pass1_src17 appears to have run properly
[Mon Jun 24 11:37:44 2013] fullrun_pn_xmm0112680201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Mon Jun 24 11:37:44 2013] fullrun_pn_xmm0112680201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Mon Jun 24 11:37:44 2013] Fit fullrun_pn_xmm0112680201_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Mon Jun 24 12:10:03 2013] Spatial fit model total counts = 146.516000, observed total counts = 144.000000
[Mon Jun 24 12:10:03 2013] Offset between fit and detection position for source 18 = 0.907017 pixels
[Mon Jun 24 12:10:03 2013] 147.655200 total counts/ 102.639000 bgd. counts: snr = 4.443372
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.907017 pixels
  Position = (338.5, 386.7) = 2 25 42.56 -4 2 41.8
  Extent = 7.1 (4.0-11.3)" x 3.9 (2.6-7.7)", rotation angle = 13 (323-53) degrees
  Source counts = 45.0 +/- 12.2
  Background counts = 102.6
  Rate = 0.005 +/- 0.001
[Mon Jun 24 12:10:03 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 12:10:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 12:10:03 2013] Assessing source extent using major axis lower bound
[Mon Jun 24 12:10:03 2013] Source does appear to be extended
[Mon Jun 24 12:10:03 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.52
[Mon Jun 24 12:10:14 2013] XMMSAS src. selection expression = ellipse(29399.328200, 33594.329600, 424.956612, 235.955407, 12.891218, X, Y)
[Mon Jun 24 12:10:14 2013] Writing source region out to fullrun_pn_xmm0112680201_pi300-10000_pass1_cl_src18_src.reg
[Mon Jun 24 12:10:14 2013] Extracting stamp from image fullrun_pn_xmm0112680201_pi300-10000_cl_sm2.00.img.gz, (314, 362) - (363, 411)
[Mon Jun 24 12:10:14 2013] XMMSAS bgd. selection expression = annulus(29399.328200, 33594.329600, 708.261020, 1416.522041, X, Y) && !ellipse(31118.033997, 32805.336975, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 24 12:10:14 2013] Writing fullrun_pn_xmm0112680201_pi300-10000_pass1_cl_src18.gif
[Mon Jun 24 12:19:06 2013] Mean detx,y = (-1288.44, 9886.24) 
[Mon Jun 24 12:19:08 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 24 12:19:32 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 24 12:19:32 2013] Setting source spectrum file to fullrun_pn_xmm0112680201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon Jun 24 12:19:32 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112680201_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Mon Jun 24 12:25:43 2013] Not generating rmf since there are only 45 counts
[Mon Jun 24 12:25:43 2013] rmf not generated due to insufficient counts
[Mon Jun 24 12:42:41 2013] Updating aperture counts using extracted products
[Mon Jun 24 12:42:41 2013] Total counts from fullrun_pn_xmm0112680201_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 62.00
[Mon Jun 24 12:42:41 2013] Total counts from fullrun_pn_xmm0112680201_pi300-10000_pass1_cl_src18_bgd.pi.gz = 190.00
[Mon Jun 24 12:42:41 2013] Got source and background scale factors 307453.000000, 3731324.000000
[Mon Jun 24 12:42:41 2013] User source parameters:
  Position = (338.5, 386.7) = 2 25 42.56 -4 2 41.8
  Extent = 7.1 (4.0-11.3)" x 3.9 (2.6-7.7)", rotation angle = 13 (323-53) degrees
  Source aperture counts = 46.3 +/- 8.9
  Background aperture counts = 15.7
  Rate = 0.005 +/- 0.001

[Mon Jun 24 12:42:43 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 24 12:42:43 2013] Using photon index=1.80, rate=0.00506, arf fullrun_pn_xmm0112680201_pi300-10000_pass1_cl_src18.arf
[Mon Jun 24 12:42:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 24 12:42:43 2013] Updating source flux to 3.3e-14
[Mon Jun 24 12:42:50 2013] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 24 12:42:51 2013] xmm0112680201/analysis//spectral/fullrun_pn_xmm0112680201_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete