[Sun May 19 00:41:42 2013] Detection parameters:
  Position = (406.6, 411.7) = 8 8 49.10 -47 13 34.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.7 +/- 12.3
  Background counts = 12.5
  Rate = 0.001 +/- 0.0002

[Sun May 19 00:41:45 2013] Off-axis axis estimate = 11.36'
[Sun May 19 00:43:11 2013] Using EEF radius (= 12.11 ")to estimate initial spatial extent for simple fitting
[Sun May 19 00:43:11 2013] Initial guess for spatial extent in simple fitting = 12.11"
[Sun May 19 00:43:11 2013] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.136
[Sun May 19 00:43:11 2013] Giving source the simple spatial ID 50 for pass 0, mean size = 12.11"
[Sun May 19 00:43:12 2013] fullrun_mos1_xmm0112670601_pi300-10000_cl_pass0_src50.ximg exists
[Sun May 19 00:43:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112670601_pi300-10000_cl_pass0_src50.csv
[Sun May 19 00:43:12 2013] fullrun_mos1_xmm0112670601_pi300-10000_cl_pass0_src50_1.ximg exists
[Sun May 19 00:43:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112670601_pi300-10000_cl_pass0_src50.csv
[Sun May 19 00:43:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112670601_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112670601_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 00:43:13 2013] fullrun_mos1_xmm0112670601_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Sun May 19 00:43:13 2013] fullrun_mos1_xmm0112670601_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Sun May 19 00:43:13 2013] Fit fullrun_mos1_xmm0112670601_pi300-10000_cl_pass0_tfrozen_src50 appears to have run properly
[Sun May 19 00:44:08 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 14.472339 pixels away
[Sun May 19 00:44:08 2013] Warning, spatial fit 50 centroid is now closest to src. 43
[Sun May 19 00:44:08 2013] Vigneting correction estimate = 1.000000
[Sun May 19 00:44:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 00:44:08 2013] Assessing source extent using major
[Sun May 19 00:44:08 2013] Source does appear to be extended
[Sun May 19 00:44:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 00:45:10 2013] Using EEF radius (= 12.11 ")to estimate initial spatial extent for simple fitting
[Sun May 19 00:45:10 2013] Initial guess for spatial extent in simple fitting = 12.11"
[Sun May 19 00:45:10 2013] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.136
[Sun May 19 00:45:10 2013] Giving source the simple spatial ID 49 for pass 1, mean size = 12.11"
[Sun May 19 00:45:14 2013] fullrun_mos1_xmm0112670601_pi300-10000_cl_pass1_src49.ximg exists
[Sun May 19 00:45:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112670601_pi300-10000_cl_pass1_src49.csv
[Sun May 19 00:45:14 2013] fullrun_mos1_xmm0112670601_pi300-10000_cl_pass1_src49_1.ximg exists
[Sun May 19 00:45:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112670601_pi300-10000_cl_pass1_src49.csv
[Sun May 19 00:45:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112670601_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112670601_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 00:45:15 2013] fullrun_mos1_xmm0112670601_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Sun May 19 00:45:15 2013] fullrun_mos1_xmm0112670601_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Sun May 19 00:45:15 2013] Fit fullrun_mos1_xmm0112670601_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly
[Sun May 19 00:46:05 2013] Spatial fit model total counts = 229.837000, observed total counts = 230.000000
[Sun May 19 00:46:05 2013] Offset between fit and detection position for source 42 = 0.483990 pixels
[Sun May 19 00:46:05 2013] Warning, changing simple spatial fit ID from 49 to 44
[Sun May 19 00:46:05 2013] 228.845200 total counts/ 190.629000 bgd. counts: snr = 2.767917
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 0.483990 pixels
  Position = (406.1, 411.7) = 8 8 49.31 -47 13 33.2
  Extent = 7.8 (5.4-13.3)" x 3.5 (2.4-4.7)", rotation angle = 232 (210-256) degrees
  Source counts = 38.2 +/- 15.1
  Background counts = 190.6
  Rate = 0.0006 +/- 0.0003
[Sun May 19 00:46:05 2013] Vigneting correction estimate = 1.000000
[Sun May 19 00:46:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 00:46:05 2013] Assessing source extent using major axis lower bound
[Sun May 19 00:46:05 2013] Source does appear to be extended
[Sun May 19 00:46:05 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.13
[Sun May 19 00:49:16 2013] XMMSAS src. selection expression = ellipse(35282.964000, 35768.478000, 470.299214, 208.839606, 231.791000, X, Y)
[Sun May 19 00:49:16 2013] Not overwriting source region fullrun_mos1_xmm0112670601_pi300-10000_pass1_cl_src42_src.reg
[Sun May 19 00:49:16 2013] Extracting stamp from image fullrun_mos1_xmm0112670601_pi300-10000_cl_sm2.00.img.gz, (379, 385) - (433, 439)
[Sun May 19 00:49:16 2013] XMMSAS bgd. selection expression = annulus(35282.964000, 35768.478000, 783.832023, 1567.664045, X, Y) && !ellipse(34353.500488, 33896.139832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35777.538727, 37813.983368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34722.270000, 35370.382000, 531.464015, 531.464015, 0.000000, X, Y)
[Sun May 19 00:49:16 2013] Writing fullrun_mos1_xmm0112670601_pi300-10000_pass1_cl_src42.gif
[Sun May 19 00:51:05 2013] Mean detx,y = (5134.25, 10567.43) 
[Sun May 19 00:51:07 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 00:51:22 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 00:51:23 2013] Setting source spectrum file to fullrun_mos1_xmm0112670601_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Sun May 19 00:51:23 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112670601_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Sun May 19 00:58:15 2013] Not generating rmf since there are only 38 counts
[Sun May 19 00:58:15 2013] rmf not generated due to insufficient counts
[Sun May 19 02:35:58 2013] Updating aperture counts using extracted products
[Sun May 19 02:35:58 2013] Total counts from fullrun_mos1_xmm0112670601_pi300-10000_pass1_cl_src42_src_b10.pi.gz = 63.00
[Sun May 19 02:35:58 2013] Total counts from fullrun_mos1_xmm0112670601_pi300-10000_pass1_cl_src42_bgd.pi.gz = 327.00
[Sun May 19 02:35:58 2013] Got source and background scale factors 263976.000000, 4636344.000000
[Sun May 19 02:35:58 2013] User source parameters:
  Position = (406.1, 411.7) = 8 8 49.31 -47 13 33.2
  Extent = 7.8 (5.4-13.3)" x 3.5 (2.4-4.7)", rotation angle = 232 (210-256) degrees
  Source aperture counts = 44.4 +/- 9.0
  Background aperture counts = 18.6
  Rate = 0.0008 +/- 0.0002

[Sun May 19 02:36:02 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 02:36:02 2013] Using photon index=1.80, rate=0.000647, arf fullrun_mos1_xmm0112670601_pi300-10000_pass1_cl_src42.arf
[Sun May 19 02:36:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 19 02:36:02 2013] Updating source flux to 2.7e-14
[Sun May 19 02:36:29 2013] Source 42 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 19 02:36:30 2013] xmm0112670601/analysis//spectral/fullrun_mos1_xmm0112670601_pi300-10000_pass1_cl_src42_pl.csv not found, spectral fit skipped or did not complete